Abstract:Fuel cells are gaining worldwide attention as an acceptable technology for achieving carbon neutrality. However, existing fuel cells use large amounts of precious metals, which limits their widespread adoption. Precious metal-free fuel cells have been studied in our laboratory. The oxidation-reduction reaction (ORR) at the cathode of the fuel cell must start at a higher potential and proceed smoothly in a four-electron reduction reaction without producing hydrogen peroxide 1,2 . We have synthesized iron-based complex catalysts using the method reported by Plamen Atanassov 3 et al. Iron nitrate dihydrate is mixed in aqueous solution with glucose, 2-methylimidazole, and zinc nitrate hexahydrate, followed by hydrothermal synthesis at 200°C for 24 hours. It is then acid-treated with nitric acid to dissolve excess metallic iron, and the process is repeated twice at 950°C to complete the Fe-N-C catalyst. However, SEM and XRD analysis confirmed the presence of large amounts of metallic iron. In response to these results, the synthetic process of the Fe-N-C catalyst was repeatedly improved, and the prepared catalyst was subjected to in-situ XAFS (X-ray absorption fine structure) analysis using synchrotron radiation at SPring-8 (Fig. 1). The peak around 7110 eV is significantly different from that of metallic iron (Fe foil), indicating that iron complex, iron phthalocyanine (II), and it is like the peak of iron phthalocyanine (II), confirming that the prepared Fe-N-C catalyst forms a good complex. The performance of the Fe-N-C catalyst with the confirmed complexation was then investigated, and a cathode that exhibited ORR performance comparable to that of the Pt catalyst was successfully synthesized (Fig. 2). In the future, further improvement of the catalyst preparation process will be discussed to develop a catalyst with much better performance than Pt. Reference 1 N. Yamamoto, D.Matsumura, Y. Hagihara, K.Tanaka, Y. Hasegawa, K. Ishii, H. Tanaka, “Investigation of hydrogen superoxide adsorption during ORR on Pt/C catalyst in acidic solution for PEFC by in-situ high energy resolution XAFS”, Jounal of Power Sources , 557, 15, (2023), 232508 2 S. Kusano, D. Matsumura, K. Ishii, H. Tanaka, J. Mizuki, “Electrochemical Absorption on Pt Nanoparticles in alkaline Solution Observed Using in-situ High Energy Resolution X-ray Absorption Spectroscopy”, Nanomaterials , 9, 4, (2019), 642 3 R. Gokhale, L-K. Tsui, K. Roach, Y. Chen, M. M. Hossen, K. Artyushkova, F. Garzon, p. Atanassov, “Hydrothermal synthesis of platinum-Group-Metal-Free Catalysts: Structural Elucidation and Oxygen Reduction Catalysis”, ChemElectroChem , 5, 14, (2017), 1848-1853 Figure 1

Single-Pot Solvothermal Synthesis of Single-Crystalline Nickel–Metal Organic Framework Nanosheets for Direct Iron Fuel Cell Applications

Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Solvothermal synthesis of hybrid nanoarchitectonics nickel-metal organic framework modified nickel foam as a bifunctional electrocatalyst for direct urea and nitrate fuel cell

In-situ grown nickel iron bimetal organic frameworks from activated Ni foam for efficient energy storage and electrocatalysis: Study of metal ratio and nickel precursor effects

Solid-State Synthesis of Highly Dispersed Nitrogen-Coordinated Single Iron Atom Electrocatalysts for Proton Exchange Membrane Fuel Cells

Metal-organic Framework Derived Iron-Nickel Sulfide Nanorods for Oxygen Evolution Reaction

Non-Precious Hydrogen Oxidation Catalysts for Anion Exchange Membrane Fuel Cells

Iron–Nickel Nitride Nanostructures in Situ Grown on Surface-Redox-Etching Nickel Foam: Efficient and Ultrasustainable Electrocatalysts for Overall Water Splitting

Iron-modulated Ni3S2 derived from a Ni-MOF-based Prussian blue analogue for highly efficient oxygen evolution reaction

Preparation of nickel manganese oxide modified ni foam for anode catalyst direct urea fuel cell

Durable Ni3N porous nanosheets array for non-noble metal methanol oxidation reaction

Corrosion of Iron-Nickel Foam to In Situ Fabricate Amorphous FeNi (Oxy)hydroxide Nanosheets as Highly Efficient Electrocatalysts for Oxygen Evolution Reaction

Porous Nickel-Iron Alloys As Anode Support for Intermediate Temperature Solid Oxide Fuel Cells: II. Cell Performance and Stability

A Rational Design of FeNi Alloy Nanoparticles and Carbonate-Decorated Perovskite As a Highly Active and Coke-Resistant Anode for Solid Oxide Fuel Cells

One-Step in Situ Growth of Iron-Nickel Sulfide Nanosheets on FeNi Alloy Foils: High-Performance and Self-Supported Electrodes for Water Oxidation.

One-Step Growth of Iron-Nickel Bimetallic Nanoparticles on Feni Alloy Foils: Highly Efficient Advanced Electrodes for the Oxygen Evolution Reaction

One-Step Electrosynthesis of Bifunctional NiCu Nanosheets on Iron Foam for Remarkably Enhanced Alkaline Water Splitting

Fe-Based Metal–Organic Framework-Ni 3 S 2 Heterostructure Nanocomposites for Efficient Oxygen Evolution Reaction at High Current Densities

Conductive nitrogen-doped carbon armored MOF-derived Fe doped nickel sulfide for efficient oxygen evolution reaction

Nickel-iron nanoparticles encapsulated in carbon nanotubes prepared from waste plastics for low-temperature solid oxide fuel cells

Improvement of Oxygen Reduction Reaction Performance of Fe-N-C Catalyst