Abstract:Biobased plastics have the potential to be sustainable, but to explore their circularity further, current end-of-life options need to be broadened. Mechanical recycling is one of the most accepted methods to bring back plastics into the loop. Polyhydroxybutyrates (PHBs) are biobased and biodegradable in nature with promising properties and varied applications in the market. This study focuses on their potential for mechanical recycling by multiple extrusion cycles (E1-E5) and multi-faceted characterization of the virgin (V) and reprocessed materials from E1 to E5. The behavior is compared to polypropylene (PP) as a reference with a similar property profile, which has also been reprocessed five times. The thermal properties of both series showed a stable melting point and thermal decomposition temperature from thermal analyses (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)). However, a steady increase in the degree of crystallinity was observed which could counterbalance the decrease in molecular weight due to repeated extrusion measured by gel permeation chromatography and resulted in similar values of tensile strength across the cycles. The strain at break was impacted after the first extrusion, but no significant change was observed thereafter; the same was observed for impact strength. Even in scanning electron microscopy (SEM) images, virgin and E5 samples appeared similar, showing the stability of morphological characteristics. Fourier transform infrared spectroscopy (FTIR) results revealed that no new groups are being formed even on repeated processing. The deviation between the PHB and PP series was more predominant in the melt mass flow rate (MFR) and rheology studies. There was a drastic drop in the MFR values in PHB from virgin to E5, whereas not much difference was observed for PP throughout the cycles. This observation was corroborated by frequency sweeps conducted with the parallel plate method. The viscosity dropped from virgin to E1 and E2, but from E3 to E5 it presented similar values. This was in contrast to PP, where all the samples from virgin to E5 had the same values of viscosity. This paper highlights the possibilities of mechanical recycling of PHB and explains why future work with the addition of virgin material and other additives is an area to be explored.

Molecular scale-driven upgrading of extrusion technology for sustainable polymer processing and recycling

New Sustainable Polymers with On-Demand Depolymerization Property

Process Intensification Of Polymerization Processes With Embedded Molecular Weight Distributions Models: An Advanced Optimization Approach

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Optimization and Scale-Up for Polymer Extrusion

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Fused Filament Fabrication of a Dynamically Crosslinked Network Derived from Commodity Thermoplastics

An experimental validation of diffusion-based devolatilization models in extruders using post-industrial and post-consumer plastic waste

Applying the principles of green chemistry to achieve a more sustainable polymer life cycle

Leveraging mechanochemistry for sustainable polymer degradation

Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

Optimization of Polymer Processing: A Review (Part I—Extrusion)

Magnetic resonance insights into the heterogeneous, fractal-like kinetics of chemically recyclable polymers

Sustainable Additive Manufacturing: Mechanical Response of High-Density Polyethylene over Multiple Recycling Processes

Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability

Upcycling Polyolefin Blends into High-Performance Materials by Exploiting Azidotriazine Chemistry Using Reactive Extrusion

Functional Upcycling of Polyurethane Thermosets into Value-Added Thermoplastics via Small-Molecule Carbamate-Assisted Decross-Linking Extrusion

Closed-loop recycling of polyethylene-like materials

Circularity in mixed-plastic chemical recycling enabled by variable rates of polydiketoenamine hydrolysis

Disequilibrating Dynamic Polymers for Spontaneous Recyclability

Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends