Abstract:X12 (X12CrMoWVNbN10-1-1) ferritic heat resistant steel is an important material for the production of new-generation ultra-supercritical generator rotors. Hot compression tests of X12 ferritic heat-resistant steel were performed via a Gleeble-1500D testing machine under temperatures of 1050–1250 °C and strain rates of 0.05–5 s−1. In order to provide material model data for finite element simulations and accurately predict the hot deformation behavior, a reverse optimization method was proposed to construct elevated temperature constitutive models of X12 ferritic heat-resistant steel in this paper, according to the Hansel–Spittel constitutive model. To verify the accuracy of the model, the predicted and experimental values of the constitutive model were compared. The results indicated that the model had a high prediction accuracy. Meanwhile, the correlation coefficient between the experimental value and the predicted value of constitutive model was 0.97833. For further verification of the accuracy of the model, it was implemented in finite element FORGE@ software to simulate the compression tests of different samples under different conditions. Comparing actual displacement–load curves with displacement–load curves acquired through finite element simulations, the results indicated that displacement–load curves predicted by the model were very consistent with actual displacement–load curves, which verified the accuracy of the model. Moreover, to research the optimal processing parameters of the material, hot processing maps were drawn according to the dynamic material model. In terms of microstructure evolution, a characteristic area distribution map of the hot processing map was established. Therefore, the optimal hot forming parameters regions were in the range of 1150–1200 °C/0.05–0.62 s−1 for X12 ferritic heat-resistant steel.

Cooling Rate of Hot Stamping Dies by Constructed Cooling Temperature Trend Model

Study on isothermal fatigue life prediction model of a new type hot stamping die steel 4Cr2Mo2V

Thermo-mechanical coupled simulation of hot stamping components for process design

Characterization of Hot Deformation Behavior and Processing Map of As-Cast H13 Hot Work Die Steel

Microstructural Stability and Softening Resistance of a Novel Hot-Work Die Steel

Identification of the Constitutive Model Parameters by Inverse Optimization Method and Characterization of Hot Deformation Behavior for Ultra-Supercritical Rotor Steel

Research on hot deformation, dynamic recrystallization and numerical simulation of Fe–28Mn–10Al–1.5C–0.6V steel

Effect of Spheroidizing Annealing on the Carbide Precipitation Behavior of Cr-Mo-V-W Hot Work Die Steels

Application of transient nonlinear thermal analysis on quenching of hot die steel

High-temperature oxidation wear performance and mechanism of Cr–Mo (W)–V hot-work die steel

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Microstructure and Tempering Softening Mechanism of Modified H13 Steel with the Addition of Tungsten, Molybdenum, and Lowering of Chromium

Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles

Fluctuations of properties of Cr-Mo-V hot work die steels by artificial increment of vanadium

Improved Red Hardness and Toughness of Hot Work Die Steel through Tungsten Alloying

Effect of cooling rate on microstructure, hardness, and residual stress of 0.28C–0.22Ti wear-resistant steel

Constitutive modeling of TA15 alloy sheet coupling phase transformation in non-isothermal hot stamping process

Hot Ductility Prediction Model of Cast Steel with Low-Temperature Transformed Structure during Continuous Casting

A New Wear Calculation Method for Galvanized Ultra-High-Strength Steel during Hot Stamping

Effect of Tempering Temperature on Microstructure and Properties of a New Type of Nitrogen‐Containing Hot‐Work Die Steel 3Cr7Mo2NiSiVN