Influence of Steel Slag as a Partial Replacement of Aggregate on Performance of Reinforced Concrete Beam
Tadese Birlie Mekonen,Temesgen Ejigu Alene,Yared Aklilu Alem,Wallelign Mulugeta Nebiyu
DOI: https://doi.org/10.1186/s40069-024-00698-5
2024-08-28
International Journal of Concrete Structures and Materials
Abstract:Amidst the global pursuit of sustainable alternatives in concrete production, this study explores the viability of incorporating by-products or waste materials as aggregates to support the concrete construction industry, with a specific emphasis on steel slag. The objective of this study is to evaluate the effectiveness of steel slag as a partial replacement for fine and coarse aggregates in concrete production. The experiment involved casting 30 cubes and 10 beams, replacing fine aggregate from 0 to 60%. Flexural and compressive strength tests at 7 and 28 days followed the ACI method. Results revealed that a 30% replacement of fine aggregate with steel slag led to higher compressive strength at both 7 and 28 days, while a 45% replacement showed superior flexural strength at 28 days. Further chemical analysis and optimization are recommended for deeper insights. The study concludes with marginal improvements in compressive and flexural strength with steel slag partial replacement, identifying 30% for fine aggregate and 45% for coarse aggregate as optimal replacements. In addition, the mineral composition of steel slag exhibits significant variability, with compounds, including silicon dioxide (SiO 2 ), iron oxide (Fe 2 O 3 ), manganese oxide (MnO), aluminum oxide (Al 2 O 3 ), and calcium oxide (CaO). Chemical analysis indicates high silicate content and minimal alkali content, contributing to enhanced strength during concreting. Higher steel slag replacement reduces workability, confirmed by slump tests. However, all mixes maintain a true slump, and unit weight increases with steel slag aggregate replacement. Compressive strength improves incrementally with higher steel slag content, echoing prior research. In addition, flexural strength rises with steel slag replacing both coarse and fine aggregates, suggesting enhanced performance in reinforced concrete structures. These findings highlight steel slag's potential as a sustainable alternative in concrete production, aiming to advance its application in the construction industry, promoting environmental sustainability and economic viability.
construction & building technology,materials science, multidisciplinary,engineering, civil