Abstract:Over the last decade, researchers have developed a variety of new analytical and clinical diagnostic devices. These devices are predominantly based on microfluidic technologies, where biological samples can be processed and manipulated for the collection and detection of important biomolecules. Polydimethylsiloxane (PDMS) is the most commonly used material in the fabrication of these microfluidic devices. However, it has a hydrophobic nature (contact angle with water of 110°), leading to poor wetting behavior and issues related to the mixing of fluids, difficulties in obtaining uniform coatings, and reduced efficiency in processes such as plasma separation and molecule detection (protein adsorption). This work aimed to consider the fabrication aspects of PDMS microfluidic devices for biological applications, such as surface modification methods. Therefore, we studied and characterized two methods for obtaining hydrophilic PDMS surfaces: surface modification by bulk mixture and the surface immersion method. To modify the PDMS surface properties, three different surfactants were used in both methods (Pluronic® F127, polyethylene glycol (PEG), and polyethylene oxide (PEO)) at different percentages. Water contact angle (WCA) measurements were performed to evaluate the surface wettability. Additionally, capillary flow studies were performed with microchannel molds, which were produced using stereolithography combined with PDMS double casting and replica molding procedures. A PDMS microfluidic device for blood plasma separation was also fabricated by soft lithography with PDMS modified by PEO surfactant at 2.5% (v/v), which proved to be the best method for making the PDMS hydrophilic, as the WCA was lower than 50° for several days without compromising the PDMS's optical properties. Thus, this study indicates that PDMS surface modification shows great potential for enhancing blood plasma separation efficiency in microfluidic devices, as it facilitates fluid flow, reduces cell aggregations and the trapping of air bubbles, and achieves higher levels of sample purity.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is a series of problems caused by the hydrophobic nature of the polydimethylsiloxane (PDMS) surface when using PDMS materials for blood plasma separation in microfluidic devices. Specifically, these problems include: 1. **Poor fluid wettability**: The hydrophobic nature of PDMS (the water contact angle is about 110°) leads to poor wettability of the fluid in the microchannel, affecting the flow efficiency of the fluid. 2. **Difficult fluid mixing**: The hydrophobic surface makes it difficult to mix fluids in the microchannel, which may lead to unstable fluid flow. 3. **Uneven coating**: It is difficult to obtain a uniform coating on the hydrophobic surface, affecting the performance of the device. 4. **Low plasma separation efficiency**: The hydrophobic surface is not conducive to plasma separation, which may lead to cell aggregation and bubble capture, reducing the purity of the sample. 5. **Protein adsorption problem**: The hydrophobic surface is prone to non - specific adsorption of proteins, interfering with the accuracy of analytical or biological experiments. To solve the above problems, the paper studied two methods to improve the hydrophilicity of the PDMS surface: **bulk mixture method** and **surface immersion method**. Through these methods, the author hopes to improve the wettability of the PDMS surface, thereby improving the performance of microfluidic devices in blood plasma separation. Specific goals include: - **Improve surface hydrophilicity**: By adding different concentrations of surfactants (such as Pluronic® F127, polyethylene glycol (PEG) and polyethylene oxide (PEO)), make the PDMS surface more hydrophilic. - **Evaluate the effect of surface modification**: Evaluate the wettability and fluid flow performance of the surface - modified PDMS samples by measuring the water contact angle (WCA) and capillary flow studies. - **Optimize plasma separation efficiency**: Prepare a microfluidic device for passive plasma separation and evaluate its performance, especially to improve the efficiency of plasma separation through the improved PDMS surface. Through these studies, the author hopes to develop an efficient and stable microfluidic device for the pretreatment of blood samples and plasma separation, thereby playing an important role in clinical diagnosis and bioanalysis.

Polydimethylsiloxane Surface Modification of Microfluidic Devices for Blood Plasma Separation

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Study of plasma treatment for PDMS surface modification on the fabrication of microfluidic devices

Recent developments in PDMS surface modification for microfluidic devices

Atmospheric Pressure Plasma Functionalization of Sealed PDMS Microfluidics: Application to Capillary Pumping and Enhanced Cell Growth.

A Review of Methods to Modify the PDMS Surface Wettability and Their Applications

Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices

Evaluation of polydimethylsiloxane (PDMS) surface modification approaches for microfluidic applications

Systematic Characterization of Hydrophilized Polydimethylsiloxane

Hydrophilic surface modification of PDMS for droplet microfluidics using a simple, quick, and robust method via PVA deposition

An Approach for Irreversible Bonding of PDMS-PS Hybrid Microfluidic Chips at Room Temperature

Engineered Membranes for Residual Cell Trapping on Microfluidic Blood Plasma Separation Systems: A Comparison between Porous and Nanofibrous Membranes

Microscale investigation on the wettability and bonding mechanism of oxygen plasma-treated PDMS microfluidic chip

Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes

Enhancement of the surface free energy of PDMS for reversible and leakage-free bonding of PDMS–PS microfluidic cell-culture systems

Solution-phase Surface Modification in Intact Poly(dimethylsiloxane) Microfluidic Channels.

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Separation of Proteins on Surface‐modified Poly(dimethylsiloxane) Microfluidic Devices

Reliable plasmonic biosensing with atmospheric pressure dielectric barrier discharge oxygen plasma treated polydimethylsiloxane microfluidic channels

Investigation of Cold Atmospheric Plasma Treatment in Polydimethylsiloxane Microfluidic Devices with a Transmural Method

Plasma Modification of Substrate with Poly(Methylhydrosiloxane) for Enhancing the Interfacial Stability of Pdms/Pan Composite Membrane