Abstract:This paper introduced a novel approach to enhance the vertical scanning angle of a large aperture 2D electromagnetic micromirror through the utilization of a cascaded torsional beam design. The primary objective was to increase the vertical scanning angle without compromising the robustness, which was achieved by optimizing the trade-off between the rotation angle and the first mode of resonant frequency. The cascaded design provides flexibility to either increase the outer frame's rotation angle without sacrificing torsional stiffness or enhance the torsion beam's stiffness while maintaining the same rotation angle, thus elevating the first-mode resonant frequency and overall robustness. The effectiveness of the cascaded design was demonstrated through a comparative study with a non-cascaded 2D micromirror possessing the same aperture size, torque, and mass moment of inertia. Theoretical analysis and finite-element simulation are employed to determine critical parameters such as the stiffness ratio between the cascaded torsion beams, and to predict improvements in the scanning angle and primary resonant frequency brought by the cascaded design. Prototypes of both cascaded and non-cascaded designs are fabricated using a flexible printed circuit board combined with Computer numerical control (CNC) machining of a Ti-alloy thin film, confirming the superior performance of the cascaded 2D micromirror. The cascaded design achieved vertical scanning angles up to 26% higher than the traditional design when both were actuated at close resonance frequencies. Additionally, the micromirror was successfully integrated into a 3D LiDAR system. The light detection and ranging (LiDAR) system was modelled in Zemax OpticStudio to find the optimized design and assembly positions.

Crosstalk-free large aperture electromagnetic 2d micromirror for lidar application

Cascaded 2D Micromirror with Application to LiDAR

Design of an Electromagnetic Micro Mirror Driving System for LiDAR

Large-Aperture Khz Operating Frequency Ti-Alloy Based Optical Micro Scanning Mirror For Lidar Application

Design and Realization of Wide Field-of-View 3D MEMS LiDAR

Low-voltage Wide-Field-of-view Lidar Scanning System Based on a MEMS Mirror.

FR4-Based Electromagnetic Scanning Micromirror Integrated with Angle Sensor

Design Study of a Large-Angle Optical Scanning System for MEMS LIDAR

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

A 2D Resonant MEMS Scanner with an Ultra-Compact Wedge-Like Multiplied Angle Amplification for Miniature LIDAR Application

Development of an Electrostatic Comb-Driven MEMS Scanning Mirror for Two-Dimensional Raster Scanning

Fast Synchronization Method of Comb-Actuated MEMS Mirror Pair for LiDAR Application

Wide angle LiDAR demonstrator based on a resonantly operated 1D MEMS mirror capable of scanning 180°

Oscillation FPCB micromirror based triangulation laser rangefinder

Beam-Steering Based on Dispersive Optical Phased Array for FMCW LiDAR Application

High Resolution Micromachined Scanning Mirror

2-D Scanning LiDAR with MEMS Mirror and STM32

5 V Compatible Two-Axis PZT Driven MEMS Scanning Mirror with Mechanical Leverage Structure for Miniature LiDAR Application

Large deflection angle resonant 1D scanning micromirror fabricated with multi jet fusion 3D printed parts

Research on Key Technologies of MEMS-based 3D Imaging LIDAR Vision System