Abstract:Preparation technology and properties analysis of three‐dimensional hexagonal honeycomb woven composites. With the advent of the 5G era, electromagnetic pollution has been increasingly serious. Structural electromagnetic wave (EW) absorbing composites play a key role in both civil and military applications. However, the laminated plate structure and laminated honeycomb structure EW‐absorbing composites were prone to delamination and low EW absorbing performance. To enhance the EW absorption and mechanical properties of composite materials, this study successfully developed a novel three‐dimensional hexagonal honeycomb woven composites (3D‐HHWC). 3D‐HHWC with a three‐dimensional hexagonal honeycomb woven fabric (3D‐HHWF) as the reinforced materials was manufactured by the vacuum‐assisted resin transfer molding (VARTM) process with epoxy resin, carbon black (CB), multi‐walled carbon nanotubes (MWCNTs), and carbonyl iron powder (CIP) as functional materials. The EW absorption performance and bending mechanical properties of 3D‐HHWC with different structural parameters were compared and analyzed. The test results demonstrated that the 3D‐HHWC (H2‐3) achieved a remarkable minimum reflection loss of −38.1 dB with the effective electromagnetic absorption band (EAB) 13.8 GHz. Additionally, CST provided a clear explanation of the electromagnetic field distribution elucidating the mechanism for EW absorption. While the 3D‐HHWC (H2‐3) had a maximum bending load 6603.9 N without obvious delamination phenomenon. Furthermore, finite element simulation clarified internal stress distribution explaining the failure mechanisms. In conclusion, the 3D‐HHWC exhibited outstanding EW absorption and mechanical properties for widespread application in military and aerospace fields. Highlights The 3D‐HHWC was formed by VARTM process with epoxy resin, CB, MWCNTs, and CIP. The 3D‐HHWC had excellent EM performance with RLmin −38.1 dB and EAB 13.8 GHz. CST provided a clear explanation of the electromagnetic field distribution. The 3D‐HHWC had a maximum bending load 6603.9 N without obvious delamination. FEM clarified internal stress distribution to explain the failure mechanisms.

Preparation and electromagnetic performance of a light-weight, thin, and high-gain three-dimensional woven hollow structure microstrip antenna

3‐D woven rectangular hollow structure conformal bearing microstrip antenna with different heights: Design, preparation, performance, and simulation

Electromagnetic performance of three-dimensional woven spacer microstrip antenna with various conductive fibers in extreme temperatures

Compressive strength of copper yarn/Kevlar yarn 3D woven spacer hybrid composites and its application for multifunctional composite antennas

Performance enhancement of low-cost microstrip patch antennas through 3D-printed conductive geometric forms

Preparation and properties of three‐dimensional hexagonal honeycomb woven composites with superior electromagnetic wave absorbing and load bearing performances

Equilateral Triangular Dielectric Resonator and Metal Patch Hybrid Antenna for UWB Application

SLM Printed Wideband Circularly Polarized Multilayer Antenna Array With Reduced Impact by the Manufacturing Imperfection

Antenna for Wireless Communications on Unmanned Aerial Vehicles

A Novel Manufacturing Process for Compact, Low-Weight and Flexible Ultra-Wideband Cavity Backed Textile Antennas

Compact and Low-Cost 3-D Printed Antennas Metalized Using Spray-Coating Technology for 5G Mm-Wave Communication Systems

Triple-band stub loaded patch antenna with high gain for 5G Sub-6 GHz, WLAN and WiMAX applications using DGS

Multi-frequency composite wearable antenna for wireless communications

Optically Transparent and Mechanically Flexible Coplanar Waveguide-Fed Wideband Antenna Based on Sub-Micron Thick Micro-Metallic Meshes

Design optimization for improving the performance of rectangular antennas using polyimide (PI) and liquid crystal (LC) polymers substrates

Electromagnetic Wave-Absorbing and Bending Properties of Three-Dimensional Gradient Woven Composites with Triangular Sections

Design Optimization for Enhancing Microstrip Antenna Performances Using Polylactic Acid (PLA) Biopolymer Substrate in Sub-6 GHz Band

Design, Preparation and Characterization of Flexible Ultra High Frequency (UHF) Antennas Based on Polyether Ether Ketone (PEEK) Films

3D printed lightweight metastructure with microwave absorption and mechanical resistance

Broadband Flexible Microstrip Antenna Array with Conformal Load-Bearing Structure

Eco-friendly microwave absorption metastructure: Design, optimization, and performance of CPVM based on PLA@CF