Abstract:An optically-transparent, mechanically flexible, monopole-radiation-characteristic, broadband omnidirectional antenna is proposed in this work. The radiator layer of the sandwich-structured antenna consists of a circular central patch with 16 circular satellite patches, and the characteristic mode analysis (CMA) was used to guide the detailed design process. We first analyzed the different modes of the 3×3 circular patch array, further reduced the size of the surrounding patch to increase the required omnidirectional mode bandwidth, further reduced the cross-polarization by adjusting the distance between the four corner patch and the central patch, and finally increased the number of surrounding patches to increase the bandwidth and gain. The entire analysis and optimization process uses the CMA. The antenna was excited by a single probe, with good omnidirectionality, low cross-polarization, and broad operating bandwidth in (5-12.7) GHz, achieving 87% relative bandwidth and peak gain of 4.1 dBi. The antenna has a radius of 27 mm and a thickness of 4.5 mm. A transparent and flexible antenna sample was fabricated on a flexible polydimethylsiloxane (PDMS) substrate using electrohydrodynamic (EHD) printing technology. The optical transmittance of the horseshoe-structured metal grids fabricated by EHD was investigated, as well as the equivalent surface resistance evaluation method. The theoretical optical transmittance of the horseshoe-structured single-layer silver grid on the PDMS substrate was 81.2%, versus 80.8% measured value, with an equivalent surface resistance of roughly 5 Ω/◻. The proposed antenna was bent on a 50 mm-radius cylinder surface and retained excellent omnidirectionality.

Design, Preparation and Characterization of Flexible Ultra High Frequency (UHF) Antennas Based on Polyether Ether Ketone (PEEK) Films

Modeling and Design of Multifunctional Nanomaterial Based Flexible Antenna

Analysis and Design of Wideband Graphite Antenna for Wearable Communication Applications

Flexible Graphite Films with High Conductivity for Radio-Frequency Antennas

A low cost thin film flexible plastic graphene-conductive polymer composite antenna

Design optimization for improving the performance of rectangular antennas using polyimide (PI) and liquid crystal (LC) polymers substrates

Design of multi-band flexible microstrip antenna based on micro drop jetting

Design of metalized polyether-ether-ether-ketone based on semi-additive manufacture for 5G applications: from bottom-up assembly to selective electroplating

Flexible low profile UWB antenna on polyimide film based on silver nanoparticle direct-write dispenser printing for wireless applications

Preparation and electromagnetic performance of a light-weight, thin, and high-gain three-dimensional woven hollow structure microstrip antenna

Enhancement the conductivity and flexibility of fabricated chip comprise from nano graphene metals assembled on polymeric PEI- PDMS matrix

Flexible Capacitively Loaded Antenna with Parylene Conformal Coating

RF Characterization of a Photocurable PEDOT:PSS:PEGDA Conductive Biomaterial for 3-D-Printing Implantable Antennas

Flexible Anti-Metal RFID Tag Antenna Based on High-Conductivity Graphene Assembly Film

Graphene-Flakes Printed Wideband Elliptical Dipole Antenna for Low Cost Wireless Communications Applications

Influence of Various Technologies on the Quality of Ultra-Wideband Antenna on a Polymeric Substrate

Compact Parylene-C-Coated Flexible Antenna for Wlan and Upper-Band Uwb Applications

Design of a Transparent and Flexible Broadband Omnidirectional Antenna Using Characteristic Mode Analysis

The effect of feed mechanisms on the structural design of flexible antennas, and research on their material processing and applications

Investigations on the suitability of PEEK material under space environment conditions and its application in a parabolic space antenna

A 3D-Printed Lightweight Broadband Electromagnetic Absorbing Metastructure with Preserved High-Temperature Mechanical Property