Performance evaluation of a new continuous flow tubular electrochemical reactor with ceramic membrane for the treatment of wastewater

Tereziana Silva da Costa,Kepler Borges França,Howard William Pearson,da Costa, Tereziana Silva
DOI: https://doi.org/10.1007/s43153-023-00363-6
2023-07-03
Brazilian Journal of Chemical Engineering
Abstract:Hybrid processes combining electrochemical anodic oxidation (EAO) and membranes have gained prominence in treatment of wastewater for providing several advantages, however, advances are still needed to enable the practical application of this technology. This study aimed to develop a new tubular electrochemical reactor to the disinfection of wastewater, coupled to a ceramic membrane to remove particles in suspension. The design of the reactor is a single modular structure and the treatment was performed with continuous flow without recirculation. Experiments with synthetic effluents revealed good chlorine electro-generation, reaching 1.80 mg L − 1 under the best operating conditions; in addition, inactivation of up to 4.85 − log 10 of Escherichia coli was verified, which occurred mainly due to the NaCl electrolyte, showing that chlorine species are the main responsible for disinfection. The inactivation of E. coli bacteria was also dependent on the concentration of chlorides when treating real wastewater, with an inactivation of up to 4.67 − log 10 . Reduction of up to 31.7% of turbidity and 31.2% of apparent color were verified in treating real wastewater, mainly due to the retention of suspended particles through the membrane. The ceramic membrane showed good permeability, enabling a flow rate of 1.6 L min −1 . The modular design of the reactor developed facilitates the scale-up to pilot scale and continuous flow operation, in addition to having economic feasibility considering the results obtained from energy consumption for the treatment of real wastewater, about 0.1 kW h m −3 .
engineering, chemical
What problem does this paper attempt to address?