Abstract:Stability is the main challenge in developing electrical energy made from sunlight, namely Dye-Sensitized Solar Cell (DSSC). The DSSC system comprises a photoanode, electrolyte, comparison electrode, and dye sensitizer with a photoelectrochemical working principle. Dye sensitizer and electrolyte are the main components that determine the stability of DSSC, with problems such as solvent evaporation leakage in liquid electrolytes and dye desorption. In overcoming these problems, the polymer electrolyte of Polysulfone/Polyethylene Glycol (PSf/PEG) is a solution to the problem by increasing the mobility of I-/I3- ions in the electrolyte. Polymer composition and porogen (pore formers) affect the ionic conductivity, which impacts the electron flow of the DSSC system. Therefore, this study optimized the composition of PSf/PEG polymer electrolyte, namely 18/0, 17/1, 16/2, 15/3, 14/4, and 13/5. This research was carried out using quantitative methods with data processed in a quantitative descriptive manner to determine the performance of DSSC based on PSf/PEG membrane electrolyte. The wavelength absorption of the dye was characterized using a Spectrophotometer UV-Vis instrument, and the specific wavelength was obtained at 573 nm, which indicates anthocyanin absorption. Electrochemical characterization of the dye using voltammetry yielded a resulting energy bandgap value of 0.5132 eV with the touch plot method. Testing the performance and stability of DSSC, voltage, and current measurements were carried out using a multimeter, and fill factor and efficiency calculations were carried out. The performance of DSSC with liquid electrolytes was 1.66%, while that of DSSC with membrane electrolytes of the best composition (16/2) was 1.38% at 0 hours. In addition, the performance test was carried out at 72 hours of exposure time, resulting in an efficiency of 0.77%, while the DSSC with the best composition of membrane electrolyte (16/2) was 1.11%. This shows a decrease in the efficiency of DSSC with liquid electrolytes by 53.43%, while the membrane electrolyte efficiency of DSSC is 19.33-20.17%.

A Review on Liquid Electrolyte Stability Issues for Commercialization of Dye-Sensitized Solar Cells (DSSC)

Progress on Electrolytes Development in Dye-Sensitized Solar Cells

Electrolyte in Solid Dye-sensitized Solar Cells

Electrolyte-Dependent Photovoltaic Responses in Dye-Sensitized Solar Cells

A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells

Review of Recent Progress in Solid-State Dye-Sensitized Solar Cells

Solid state fiber-dye sensitized solar cells (SS-FDSSC): A mini review

Environmentally Friendly Water-Based Electrolyte for Dye-Sensitized Solar Cells: Future Prospective and Outlook

Research on Electrolyte in Dye-Sensitized Solar Cell

A review on the current status of dye‐sensitized solar cells: Toward sustainable energy

Open-circuit Voltage Enhancement on the Basis of Polymer Gel Electrolyte for a Highly Stable Dye-Sensitized Solar Cell.

An Extensive Analysis of Dye-Sensitized Solar Cell (DSSC)

Stability issues pertaining large area perovskite and dye-sensitized solar cells and modules

Polyacrylonitrile-based gel polymer electrolytes for dye-sensitized solar cells: a review

Hydrogel Electrolytes Based on Xanthan Gum: Green Route towards Stable Dye-Sensitized Solar Cells

Stable quasi-solid-state dye-sensitized solar cell using a diamide derivative as low molecular mass organogelator

Stable quasi-solid-state dye-sensitized solar cell using ionic gel electrolyte with low molecular mass organogelator

Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells

Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials

Optimization of Polysulfone/Polyethylene Glycol (PSf/PEG) Casted Solution Composition as a Membrane Electrolyte in a Dye-Sensitized Solar Cell (DSSC)

Stable Quasi-Solid-State Dye-Sensitized Solar Cells Using Novel Low Molecular Mass Organogelators and Room-Temperature Molten Salts