Abstract:This study explores the application of AncorLam HR (Höganäs, Sweden), a soft magnetic composite material, in the stator core of an axial flux permanent magnet drive motor. Building on previous research that provided mechanical and thermal properties of the material, the focus is on analyzing how the manufacturing process affects the motor core's shape. A bulk prototype was created based on case 3, which demonstrated the least deviation in density and internal stress. The prototypes were produced under the conditions of SPM 7 and 90 °C, and a heat treatment in a nitrogen atmosphere for 1 h, resulting in an average density error of 0.54%, confirming process effectiveness. A microstructural analysis using scanning electron microscopy (SEM) on Sample 2, with the highest density, confirmed consistency between simulation and prototype trends. Electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analyses revealed that the internal phase structure remained unchanged. Energy-dispersive spectroscopy (EDS) and transmission electron microscopy (TEM) identified the elimination of phosphorus (P) during molding, affecting the insulating layer, a critical factor for SMC materials. In motor simulations and actual measurements, the average torque was recorded as 37.7 N·m and 34.7 N·m at 1500 rpm and 27.7 N·m and 25.1 N·m at 2000 rpm, respectively. The torque comparison observed in the actual measurements compared to the simulation results indicates that the output loss increases in the actual measurements due to the deterioration of the insulation performance judged based on the microstructure evaluation. This study confirms the viability of using AncorLam HR in motor cores for electric vehicles and provides key data for improving the performance.

Formulation and mixing conditions of magnetic composite materials used for magnetic wedges in an interior permanent magnet synchronous motor

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Reducing Rotor Temperature Rise in Concentrated Winding Motor by Using Magnetic Powder Mixed Resin Ring

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Magnetic Properties Analysis of Novel Composite Magnetic Materials for HSPMSMs

Rotor Electrical Conductivity and Eddy Current Loss Analysis of High‐speed Permanent Magnet Machine with a Novel Composite Rotor

Effect of Multi-size Magnetic Powder Gradation on Magnetic Properties of Novel Composite Magnetic Materials for HSPMSM

Design and Analysis of Interior Permanent Magnet Motor With Magnetic Isolation and Heat Dissipation Integrated Auxiliary Slot

Application of Soft Magnetic Composite in XEV Motor Core Manufacturing: Process Effects and Performance Analysis

Analysis of Winding MMF and Loss for Axial Flux PMSM with FSCW Layout and YASA Topology

Optimal Design of Outer Rotor Interior Permanent Magnet Synchronous Machine with Hybrid Permanent Magnet

Electromagnetic Design and Analysis of High Speed Permanent Magnet Motor with Composite Rotor

Study of Effect of Magnet Clearance Fit on High-speed Interior Permanent Magnet Synchronous Motor

Design and Optimization of a Slotless High-speed Permanent-Magnet Synchronous Motor with Non-magnetic Fillers in Stator

Investigation and Analysis of the Influence of Magnetic Wedges on High Voltage Motors Performance

Analytical Solution of Magnetic Field in High-Speed Permanent Magnet Synchronous Machines with Novel Composite Rotor

Rotor structure in 50 kW spoke-type interior permanent magnet synchronous motor with ferrite permanent magnets for automotive applications

Performance Enhancement of High Speed Interior Permanent Magnet Synchronous Motors Using Superior Magnetic Material

Magnetic properties optimization of novel composite magnetic materials for HSPMSM with novel composite rotor