Abstract:This paper is about the magnetic field analysis of an interior permanent magnet motor (IPM motor) by using the equivalent magnetic circuit method (EMC method), which requires a small amount of computation time compared with the finite element method (FEM). IPM motors have a specific shape of rotor in which the permanent magnets are embedded. Therefore, in the bridge region, the magnetic saturation is generated due to the shape of the permanent magnet, which affects the magnetic flux density distribution in the air gap and the characteristics of the IPM motor. Thus, to design an IPM motor, the magnetic saturation effects should be considered along with the rotor shape. In addition, because the rotor of the IPM rotates at a high speed directly in connection with the load, the stress generated from the rotor must be stably distributed. Consequently, according to the rotor shape characteristics of the IPM, the stress is concentrated in the thin bridge region during high-speed rotation. When the stress generated in the bridge region exceeds the yield stress of the rotor iron core material, the bridge part is destroyed. Therefore, it is important to analyze the stress that occurs in the rotor during high-speed rotation in the rotor design stage of the IPM. In this study, we analyzed the magnetic field characteristics of an IPM motor using its equivalent magnetic circuit while considering the magnetic saturation in the bridge region. The stability of the rotor was determined by presenting a safety factor based on the maximum stress generated at the rotor for each speed. We derived the stator natural frequency to evaluate the resonance possibility between the electrical frequency and the stator natural frequency. Finally, the validity of the constructed equivalent magnetic circuit was verified by comparing the results with those obtained via the FEM analysis and experiments.

Study of Effect of Magnet Clearance Fit on High-speed Interior Permanent Magnet Synchronous Motor

Effect of Magnet Thickness on Electromagnetic Performance of High Speed Permanent Magnet Machines

Effect of non-uniform air gap on torque, electromagnetic force, mechanical stress and vibration

Influence of Load Characteristics on Three-Phase Short Circuit and Demagnetization of Surface-Mounted PM Synchronous Motor

Comparative Study of Surface-Mounted and Interior Permanent-Magnet Motors for High-Speed Applications

Analysis on Characteristics of a Permanent Magnet Linear Synchronous Motor for High Speed MagLev by Finite Element Method

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Thermal Analysis of an Interior Permanent Magnet Synchronous Traction Motor for High Speed Railway Applications

Analysis of Radial Vibration Caused by Magnetic Force and Torque Pulsation in Interior Permanent Magnet Synchronous Motors Considering Air-Gap Deformations

Magnetic Field Analysis of an Inner-Mounted Permanent Magnet Synchronous Motor for New Energy Vehicles

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor

Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings

Magnetic Field Analysis of Surface-Mounted Permanent Magnet Motors Based on an Improved Conformal Mapping Method

Electromagnetic and Mechanical Analysis and Measurements of Interior Permanent Magnet Motors Based on Equivalent Magnetic Circuit Method

Analysis and Research on No-Load Air Gap Magnetic Field and System Multi-Objective Optimization of Interior PM Motor

Analysis of Vibrations in Interior Permanent Magnet Synchronous Motors Considering Air-Gap Deformation

Rotor Strength Analysis of High-speed Permanent Magnet Synchronous Motors

Performance Enhancement of High Speed Interior Permanent Magnet Synchronous Motors Using Superior Magnetic Material

Analysis of the Rotor Mechanical Strength of Interior Permanent Magnet Synchronous In-Wheel Motor with High Speed and Large Torque

Modeling and analysis of electromagnetic force in interior permanent magnet synchronous motor used for electric vehicles