Abstract:An equiatomic CoCrFeMnNi high-entropy alloy, which crystallizes in the face-centered cubic (fcc) crystal structure, was produced by arc melting and drop casting. The drop-cast ingots were homogenized, cold rolled and recrystallized to obtain single-phase microstructures with three different grain sizes in the range 4–160μm. Quasi-static tensile tests at an engineering strain rate of 10−3s−1 were then performed at temperatures between 77 and 1073K. Yield strength, ultimate tensile strength and elongation to fracture all increased with decreasing temperature. During the initial stages of plasticity (up to ∼2% strain), deformation occurs by planar dislocation glide on the normal fcc slip system, {111}〈110〉, at all the temperatures and grain sizes investigated. Undissociated 1/2〈110〉 dislocations were observed, as were numerous stacking faults, which imply the dissociation of several of these dislocations into 1/6〈112〉 Shockley partials. At later stages (∼20% strain), nanoscale deformation twins were observed after interrupted tests at 77K, but not in specimens tested at room temperature, where plasticity occurred exclusively by the aforementioned dislocations which organized into cells. Deformation twinning, by continually introducing new interfaces and decreasing the mean free path of dislocations during tensile testing (“dynamic Hall–Petch”), produces a high degree of work hardening and a significant increase in the ultimate tensile strength. This increased work hardening prevents the early onset of necking instability and is a reason for the enhanced ductility observed at 77K. A second reason is that twinning can provide an additional deformation mode to accommodate plasticity. However, twinning cannot explain the increase in yield strength with decreasing temperature in our high-entropy alloy since it was not observed in the early stages of plastic deformation. Since strong temperature dependencies of yield strength are also seen in binary fcc solid solution alloys, it may be an inherent solute effect, which needs further study.

Influence of twinning thickness on the mechanical properties of crystalline-amorphous dual-phase CoCrFeNiMn high entropy alloy

Size-Dependent Dislocation-Twin Interactions

Effect of Twin Boundary Density on Mechanical Behavior of Al0.1CoCrFeNi High-Entropy Alloy by Molecular Dynamics Simulation

Tailoring strength and ductility in dual-phase high-entropy alloys: Insights from deep learning molecular dynamics simulation on FCC/BCC thickness ratios

A molecular dynamics investigation of nano-twins and nano-precipitates effects in CoCrFeNi-based high-entropy alloys

A molecular dynamics investigation into deformation mechanism of nanotwinned Cu/high entropy alloy FeCoCrNi nanolaminates

Atomic Insight into Nanoindentation Response of Nanotwinned FeCoCrNiCu High Entropy Alloys

Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy

Exploring the Formation Mechanism of Deformation Twins in CrMnFeCoNi High Entropy Alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Effects of high entropy and twin boundary on the nanoindentation of CoCrNiFeMn high-entropy alloy: A molecular dynamics study

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy

Microstructure evolution in high-pressure phase transformations of CrFeNi and CoCrFeMnNi alloys

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

Molecular dynamics-based analysis of the effect of temperature and strain rate on deformation of nanocrystalline CoCrFeMnNi high-entropy alloy

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Molecular dynamics simulation of nanoindentation on nano-twinned FeCoCrNiCu high entropy alloy

Molecular dynamics investigations of the size effects on mechanical properties and deformation mechanism of amorphous and monocrystalline composite AlFeNiCrCu high-entropy alloy nanowires

Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy