Alterable tension-compression asymmetry in work hardening of an additively manufactured dual-phase high-entropy alloy
Yunjian Bai,Kun Zhang,Tianyu Chen,Zishang Liu,Yunjiang Wang,Bingchen Wei
DOI: https://doi.org/10.1016/j.ijplas.2022.103432
IF: 8.5
2022-11-01
International Journal of Plasticity
Abstract:High-entropy alloys (HEAs) as potential structural materials appear to exhibit tension-compression asymmetry (TCA) in work hardening. However, the intricate origin of the TCA, particularly in multi-domain HEAs, remains unclear. Herein, an additive manufactured AlCoCrFeNi2.1 dual-phase (FCC + BCC) HEA was used as a prototypical model system to gain a fundamental understanding of the TCA in multi-domain HEAs. Microscopic characterizations demonstrate that the TCA in work hardening is primarily attributed to the dominant stacking fault (SF)-dislocation interaction, SF-SF interaction, and subordinate twin-dislocation interaction, all of which are observed only in the FCC phase in compression. The former two mechanisms not only offer strong strengthening by impeding dislocation motion, but also bring considerable plasticity. The latter mechanism occurs in the dense SF regions to accommodate the plastic deformation, and contribute to additional work hardening. However, in tension, there are only dislocations generated inside the FCC phase. The marked difference in the deformation of the FCC phase is closely related to the FCC/BCC alternating lamellar heterostructure. Dislocations will preferentially nucleate and accumulate at the phase boundary, resulting in localized stress concentration. In tension, the stress concentration will lead to rapid crack propagation parallel to the phase boundary, resulting in premature failure of the sample. In compression, various types of cracks are formed and develop slowly, postponing the failure of the sample. Also, this TCA has the potential to be tuned by tailoring the FCC/BCC lamellar heterostructure; specifically, the width ratio of the FCC phase to the BCC phase. Our findings deliver cutting-edge insights relative to the TCA in new forms of alloys and offer a promising strategy to achieve the tunable possibility of the TCA in the work hardening by designing hierarchical heterostructures.
materials science, multidisciplinary,engineering, mechanical,mechanics