Abstract:This work is essential for the advancement of nanocomposite technology, with substantial societal ramifications. The evolution of economically viable and high-performing nanocrystals (NCs) may result in the creation of more efficient and adaptable optoelectronic devices, hence contributing to technical progress and economic advantages. The (PVA–PEG–SiO 2 /CuO) nanocomposites have been produced using a casting method. Optical microscopy has allowed us to observe that the (SiO 2 /CuO) NMs create a connected network within the NCs, in contrast to the pure (PVA–PEG). The FTIR ray displays changes in the position of peaks and variations in shape and size. The findings of the optical characteristics indicate a significant increase in absorption by approximately 2275% at a wavelength of 550 nm. Additionally, the energy gap experienced a decrease of roughly 57% (from 4.37 to 2.80 eV) for allowed indirect transitions and 120% (from 1.68 to 3.69 eV) for forbidden indirect transitions. An experimental and theoretical investigation explored the optical characteristics of (PVA–PEG–SiO 2 /CuO) NCs. As the concentration of (SiO 2 /CuO) nanoparticles rose, several optical characteristics of the pure (PVA–PEG) material demonstrated an upward trend. Based on the electrical properties of alternating current, it can be observed that as the frequency (f) increases, the dielectric [constant (ε′) and loss (ε′′)] of NCs diminish. However, these values increase as nanomaterials (NMs) concentration increases. The ε′ and σ a.c (electrical conductivity) of the (PVA–PEG) increased by approximately 101% (from 0.60 to 1.20) and 173% (from 1.25 × 10 –11 to 3.41 × 10 –11 ), respectively, when the amount of (SiO 2 /CuO) reached 6% by weight at a frequency of 100 Hz. The obtained results indicated that the doping (PVA–PEG) with (SiO 2 /CuO) NMs improved the structural and electrical characteristics, which made the (PVA–PEG–SiO 2 /CuO) nanostructures promising materials for a wide range of optoelectronic devices, including but not limited to solar cells, transistors, electronic gates, photovoltaic cells, lasers, diodes, and other related fields. The results of the pressure sensor application showed that the (PVA–PEG–SiO 2 /CuO) nanostructures have high sensitivity for pressure with excellent flexibility and high environmental resistance compared to other sensors.

Boosting the optical and electrical properties of PVA/Na-CMC blend by Cr 2 O 3 nanoparticles for photonic and energy storage applications

Tuning the band gap, optical, mechanical, and electrical features of a bio-blend by Cr2O3/V2O5 nanofillers for optoelectronics and energy applications

Hydroxyapatite nanoparticles reinforced polyvinyl alcohol/chitosan blend for optical and energy storage applications

Enhancing the linear and nonlinear optical properties by ZnS/V-doped polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol polymeric nanocomposites for optoelectronic applications

Reinforcement of structural, optical, electrical, and dielectric characteristics of CMC/PVA based on GNP/ZnO hybrid nanofiller: Nanocomposites materials for energy‐storage applications

An insight into the effect of ZnWO 4 /ZnS nanoparticles on the optical and electrical characteristics of PVA/PVP/CMC blended polymer for optoelectronic and energy storage applications

Developing polymer nanocomposite films of ZnO/NiFe 2 O 4 nanohybrids, polyvinyl pyrrolidone, and chitosan for flexible electromagnetic applications and energy storage devices

Modulating structural, dielectrical and optical properties of PVA/methylcellulose/WO3 nanocomposites for energy storage and optoelectronics applications

Synthesis of carbon nanotubes/titanium dioxide and study of its effect on the optical, dielectric, and mechanical properties of polyvinyl alcohol/sodium alginate for energy storage devices

ZnO nanofiller concentrations modified P(VDF-HFP)/PEO polymer matrix-based nanocomposites of enhanced optical and dielectric properties for emerging optoelectronic and energy storage devices

Modifying Structural, Optical, and Electrical Features of PVA/CMC/PVP Blend Doped with ZnWO4 and TPAI

Effect of CsBr on the optical properties and electrical conductivity of PVP/PVA composite for flexible optoelectronic devices

Comparative analysis of the optical and electrical properties of PVA/PVP blended polymer with ZnCo 2 O 4 /CdS nanocomposites for optoelectronic and dielectric capacitor applications

Enhancement of Structural, Optical, and Electrical Properties of Hydroxypropyl Methylcellulose/Polyvinyl Alcohol Nanocomposites by Nickel Ferrite Nanoparticles for Optoelectronic Applications

Synthesis and Tuning the Morphological, Structural, Optical and Dielectric Features of SiO2/CuO Futuristic Nanocomposites Doped PVA–PEG for Optoelectronic and Energy Storage Applications

Boosting of the Optical Properties, and Electrical Conductivity of Polymethyl Methacrylate (PMMA)/ Polystyrene (PS) Blend with Zinc Oxide Nanoparticles for High-Performance Energy Storage Devices

Structural, optical, electrical, and DFT studies on polyvinyl pyrrolidone/polyethylene oxide polymer blend filled with MoO3 nanoplates for flexible energy‐storage devices

Modifications in the structural, optical, and dielectric properties of PVA/PVP/PEG blend by incorporation of PANi/ZnWO 4 nanohybrid for optoelectronic and energy storage devices

Improving the optical and dielectric characteristics of PVA/PVP/PEG/ZnWO 4 /CdS blends

Enhancing the structural, thermal, and dielectric properties of the polymer nanocomposites based on polymer blend and barium titanate nanoparticles for application in energy storage

Nanocomposites comprising PVA/CMC matrix and CNTs/Fe 2 O 3 nanohybrid: A comparative investigation of structural, optical, electrical, and dielectric properties as an application in advanced electrochemical and optoelectronic devices