Abstract:Copper (1) oxide nanoparticles together with matrix polymers of polyvinyl alcohol (PVA) and polyaniline (PANI) composite films were synthesized, as these materials are of importance in optoelectronic applications. ‎Nanoparticles of Cu2O were produced by chemical precipitation. Polymerization of aniline was carried out through polymerization in an acidic medium. Structural, thermal, and optical properties of PVA+PANI/Cu2O nanocomposite were inspected by x-ray diffraction (XRD), scanning electron microscopy (SEM), fourier-transform infrared (FTIR), differential scanning calorimeter (DSC) and ultraviolet-visible spectroscopy (UV-Vis spectroscopy). X-ray diffraction peaks at 29.53°, 36.34°, and 42.22° indicated the presence of cuprous oxide nanoparticles, having high dispersions and limited size distributions. The estimated average size of Cu2O nanoparticles was ~ 17.1525 nm. A characteristic peak at around 2θ = 18.5° was attributed to periodical parallel and perpendicular polymer chains, which denoted the formation of PANI. SEM results indicated the symmetrical dispersion of Cu2O nanoparticles inside the hybrid polymer of PVA and PANI matrix, being potentially useful for encapsulation and acting as a good capping agent. FTIR results established the formation of PANI and Cu2O with nanocrystalline nature. DSC results revealed the appearance of one single peak of Tg which decreased with Cu2O content of 4% wt, followed by an increase of that value by increasing Cu2O content up to 16%wt. Thermogram analysis of the PANI and PVA embedded with Cu2O form showed an exothermic peak at (240-292)°C affiliated to the cross-linking reaction, while the Tm value of prepared nanocomposites is just about close to that of PVA polymer. The results indicated that there is an increase in thermal stability due to the presence of Cu2O NPS within the matrix of polymers. The distinguishing peaks at 330, 347, and 457 nm which refer to PANI are assigned to π−π* electron transitions among the benzenoid rings. The high absorption intensity of the peak at 470 nm for the blended PVA+PANI having 12% wt of Cu2O NPS is assigned due to the inter-band transitions for electrons of the core copper as well as copper oxide. This points out that the increasing quantity of Cu2O NPs leads to increases in the amounts of highly oxidized structures in PANI and decreases in the doping electrons and length of conjugation throughout the incorporation of Cu2O NPs into PANI matrix. Depending on the practical results, it can be said that these polymeric nanocomposites can be efficiently used in photovoltaic technology applications.

Modifications in the structural, optical, and dielectric properties of PVA/PVP/PEG blend by incorporation of PANi/ZnWO 4 nanohybrid for optoelectronic and energy storage devices

Modifying Structural, Optical, and Electrical Features of PVA/CMC/PVP Blend Doped with ZnWO4 and TPAI

An insight into the effect of ZnWO 4 /ZnS nanoparticles on the optical and electrical characteristics of PVA/PVP/CMC blended polymer for optoelectronic and energy storage applications

Enhancing the linear and nonlinear optical properties by ZnS/V-doped polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol polymeric nanocomposites for optoelectronic applications

Tuning the optical, and dielectric properties of PVC/PEO/NiMoO4/MWCNTs/x wt %PANI blended polymers for optoelectronic applications

Improving the optical and dielectric characteristics of PVA/PVP/PEG/ZnWO 4 /CdS blends

Comparative analysis of the optical and electrical properties of PVA/PVP blended polymer with ZnCo 2 O 4 /CdS nanocomposites for optoelectronic and dielectric capacitor applications

Optical and Dielectric Features of PVA/CMC/PVP/ZnMn2O4/CuCo2O4/x wt % MWCNTs Blended Polymers for Optoelectronic Applications

A Comparative Study of the Linear/Nonlinear Optical, and Dielectric Properties of PVA/CMC/(1-x)ZnWO4-xPbS Blended Polymers for Optoelectronic Applications

Probing the influence of ZnFe2O4 doping on the optical and dielectric characteristics of PMMA/PANi

Fabrication and exploration the structural, optical, and dielectric properties of PVP/CMC/MWCNTs/ZnWO 4 blends

Assessment of performance based on structure, dielectric and linear/nonlinear optical properties of PVA/CMC/PVP blends loaded with ZnS/Co

A systematic study of structural, conductivity, linear, and nonlinear optical properties of PEO/PVA-MWCNTs/ZnO nanocomposites films for optoelectronic applications

Modulating structural, dielectrical and optical properties of PVA/methylcellulose/WO3 nanocomposites for energy storage and optoelectronics applications

ZnO nanofiller concentrations modified P(VDF-HFP)/PEO polymer matrix-based nanocomposites of enhanced optical and dielectric properties for emerging optoelectronic and energy storage devices

Structural, Optical, and Electrical Investigations of Nd2O3-Doped PVA/PVP Polymeric Composites for Electronic and Optoelectronic Applications

Synthesis of Blend Polymer (PVA / PANI)/Copper (1) Oxide Nanocomposite: Thermal Analysis and UV-Vis Spectra Specifications

The optical anatomy of new polyvinyl alcohol/zinc peroxide (PVA/ZnO2) nanocomposite films for promising optical limiting applications

Structural, Morphological, Optical and Dielectric Properties of Ternary PANI–ZnO–PPy Nanocomposite for Optoelectronic Applications

Effect of Embedding WO3NPs on the Structural, Morphological, Optical, and Dielectric Properties of PVA-CMC-PEG Polymeric Matrix Towards Optoelectronic and Energy Storage Applications

Engineering the optical, and dielectric properties of (PVA: PVP)/BaSnO3 polymer nanocomposites as promising films for optoelectronics and energy storage applications