Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The tensile properties and microstructure of Ti6Al4V titanium (TC4) alloy specimens fabricated by SLM under five scanning strategies were studied. They are the bidirectional scanning with a 67° rotation (R-scan) strategy, bidirectional scanning along with x-axis (X-scan) strategy, bidirectional scanning along with y-axis (Y-scan) strategy, bidirectional scanning with a 90° rotation in each layer (XY-scan) strategy, and the filled scanning strategy with homocentric squares (H-scan) strategy. Through the tensile experiments of specimens fabricated by different scanning strategies, it is found that the fabricated specimens by the XY-scan strategy show the best tensile properties. Compared with the R-scan strategy, the maximum tensile strength of the specimens prepared by the XY-scan strategy increased by 17.3%, and the maximum tensile strength reached 919.55 MPa. The tensile experiment of the fabricated specimens by the angle offset XY-scan strategy shows that the tensile property is the best when the offset angle is 45°. Compared with the XY scanning strategy, the maximum tensile strength of the specimens prepared by the angle-shifted XY scanning strategy was increased by 46.1%, and the maximum tensile strength reached 1343.27 MPa. The fracture surfaces of the specimens are mainly composed of cleavage cracks and dimple cracks. The tensile properties are the worst when the fracture cracks are mainly cleavage cracks and the tensile properties are the best when the cracks are mainly dimple cracks. When the α′-phase direction of acicular martensite inside and outside the β-phase of columnar crystal is parallel to the tensile direction, the tensile properties of specimens are improved. When the secondary α′-phase direction is parallel to the tensile direction, the tensile property is further improved.

The improved strength and fracture mechanism of additive manufactured Ti-6Al-4 V alloys compared with corresponding as-rolled alloys

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Tensile Behavior of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-Built Surface Quality

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Densification, Tailored Microstructure, and Mechanical Properties of Selective Laser Melted Ti–6Al–4V Alloy via Annealing Heat Treatment

Enhanced strength of additively manufactured Ti-6Al-4V alloy through multistage strain hardening

An investigation of ductile fracture behavior of Ti6Al4V alloy fabricated by selective laser melting

Influence of Tungsten Addition on Microstructure and Tensile Properties of Ti6Al4V Fabricated by Laser-Directed Energy Deposition

Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition

In-situ tensile deformation behavior of powder metallurgy Ti6Al4V alloys

Mechanism of enhanced ductility of Ti–6Al–4V alloy components deposited by pulsed plasma arc additive manufacturing with gradient-changed heat inputs

Microstructure and Mechanical Properties of An Ultrahigh-strength Titanium alloy Ti-4.5Al-5Mo-5V-6Cr-1Nb Prepared Using Laser Directed Energy Deposition and Forging: A Comparative Study

Investigation of the scanning strategy on the microstructure and tensile property of Ti6Al4V alloy fabricated by selective laser melting

Transverse texture weakening and anisotropy improvement of Ti-6Al-4V alloy sheet via asymmetric rolling and static recrystallization annealing

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

Microdeformation and strengthening mechanism of 3D printed TC4/TC11 gradient titanium alloy subjected to tensile loading

Microstructure and Mechanical Property Improvement of Laser Additive Manufacturing Ti–6Al–4V via the Niobium Addition

The structure and mechanical properties of high-strength aluminum alloys fabricated with wire arc additive manufacturing

Achieving grain refinement and ultrahigh yield strength in laser aided additive manufacturing of Ti−6Al−4V alloy by trace Ni addition

Mechanical Behavior of Additive Manufacturing (AM) and Wrought Ti6Al4V with a Martensitic Microstructure