Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Fatigue and Creep Properties of Carbon Nanotube/Aramid Fiber Synergistically-Reinforced Rubber Sealing Composites

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Comparative Study on the Effect of Carbon Nanotubes and Carbon Black on Fatigue Properties of Natural Rubber Composites

Creep rupture in carbon nanotube-based viscoplastic nanocomposites

Comparison of compressive fatigue performance of cementitious composites with different types of carbon nanotube

Dynamic Fatigue Behavior of Natural Rubber Reinforced with Nanoclay and Carbon Black

Modeling creep behavior of carbon nanotube/fiber/polymer composite cylinders

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

Research on compression-compression fatigue properties of carbon nanotubes reinforced closed-cell aluminum matrix composite foams by reinforcement content design

Flexural Creep Tests and Long-Term Mechanical Behavior of Fiber-Reinforced Polymeric Composite Tubes

Flexural creep of multi-wall carbon nanotube reinforced cement based composites under high stress level

Enhanced Fatigue and Durability of Carbon Black/natural Rubber Composites Reinforced with Graphene Oxide and Carbon Nanotubes

Elucidation of the reinforcing mechanism in carbon nanotube/rubber nanocomposites.

Mechanical design of rubber-based sealing composites reinforced with short non-asbestos fibers

Mechanical properties and structural health monitoring performance of carbon nanotube-modified FRP composites: A review

A coarse‐grained molecular dynamics study on the mechanical behavior of carbon nanotubes reinforced vulcanized natural rubber composites

Tribological Properties of Carbon Nanotube-Reinforced Composites

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

Agglomeration and aspect ratio effects on the long-term creep of carbon nanotubes/fiber/polymer composite cylindrical shells

A molecular dynamics study on the mechanical and tribological behaviors of nitrile butadiene rubber composites reinforced by boron nitride nanotubes

Failure Modes of Carbon Nanotubes in Cement Composites under Flexural Load