Abstract:Pavement surface texture features are one of key factors affecting the skid resistance of pavement. In this study, a set of stable and reliable texture measurement equipment was firstly assembled by using the linear laser ranging sensor, control system and data acquisition system. Secondly, the equipment was calibrated, and the superposition error of sensor and control system was tested by making a standard gauge block. Thirdly, four different kinds of asphalt mixture were designed, and their surface texture features were obtained by leveraging a three-dimensional laser scanner. Therefore, the surface texture features were characterized as one-dimensional profile features and three-dimensional surface features. At the end of this study, a multi-scale texture feature characterization method was proposed. Results demonstrate that the measurement accuracy of the laser scanning system in the x-axis direction can be controlled ranging from −0.01 mm to 0.01 mm, the resolution in the XY plane is 0.05 mm, and the reconstructed surface model of surface texture features can achieve a good visualization effect. They also show that the root mean square deviation of surface profiles of different asphalt pavements fluctuates greatly, which is mainly affected by the nominal particle size of asphalt mixture and the proportion of coarse aggregate, and the non-uniformity of pavement texture distribution makes it difficult to characterize the roughness of asphalt pavement effectively by a single pavement surface profile. This study proposed a texture section method to describe the 3D distribution of road surface texture at different depths. The macrotexture of the road surface gradually changes from sparse to dense starting from the shallow layer. The actual asphalt pavement texture can be characterized by a simplified combination model of “cone + sphere + column”. By calculating the surface area distribution of macro and microtextures of different asphalt pavements, it was concluded that the surface area of asphalt pavement under micro scale is about 1.8–2.2 times of the cutting area, and the surface area of macrotexture is about 1.4 times of the cutting area. Moreover, this study proposed texture distribution density to characterize the roughness of asphalt pavement texture at different scales. The SMA index can represent the macroscopic structure level of different asphalt pavements to a certain extent, and the SMI index can well represent the friction level of different asphalt pavements.

3D Reconstruction and morphology analysis of coarse aggregate using optical laser triangulation and image processing technology

Three-dimensional Modeling and Simulation of Asphalt Concrete Mixtures Based on X-ray CT Microstructure Images

Quantitative analysis and comprehensive evaluation of coarse aggregate morphology for asphalt pavement

Measuring aggregate morphologies based on three‐dimensional curvature analysis

3D Voxel-Based Approach to Quantify Aggregate Angularity and Surface Texture

Interlocking Evaluation of Mesoscopic Skeleton with the Compaction Degree of Hot-Mix Asphalt

3-D virtual design and microstructural modeling of asphalt mixture based on a digital aggregate library

Improved Procedure for the 3D Reconstruction of Asphalt Concrete Mesostructures Considering the Similarity of Aggregate Phase Geometry between Adjacent CT Slices

Application of Digital Image Processing Technique to Simulate the Macro-Mechanical Behavior of Asphalt Concrete

Investigation of the Coarse Aggregate Texture Property Using an Improved Laplacian Smoothing Algorithm

Urban Three-dimensional (3-D) Road Surface Reconstruction Based on a Data Assimilation Algorithm Using a Mobile Laser Scanning (MLS) System

Index of Asphalt Mixture Homogeneity Based on Digital Image Processing

Improved 3D Pavement Texture Reconstruction Method Based on Interference Fringe via Optimizing the Post-Processing Method

A New Data Preprocessing Method for 3D Reconstruction of Pavement

Quantitative evaluation for shape characteristics of aggregate particles based on 3D point cloud data

Assessing Surface Texture Features of Asphalt Pavement Based on Three-Dimensional Laser Scanning Technology

A spherical harmonic-random field coupled method for efficient reconstruction of CT-image based 3D aggregates with controllable multiscale morphology

Investigation on the fractal characteristic of asphalt pavement texture roughness incorporating 3D reconstruction technology

Noninvasive Measurement of Three-Dimensional Permanent Strains in Asphalt Concrete with X-Ray Tomography Imaging

Rapid Geometric Evaluation of Transportation Infrastructure Based on a Proposed Low-Cost Portable Mobile Laser Scanning System

Asphalt Pavement Texture 3D Reconstruction Based on Binocular Vision System with SIFT Algorithm