Abstract:In this paper, the experimental investigation of two simple, cost-effective interrogation techniques based on optical power measurement for fiber Bragg gratings (FBG) sensors are presented. The first technique proposed employs each channel of a coarse wavelength division multiplexing (CWDM) demultiplexer as an edge filter to modulate the optical power reflected by each sensing FBG, allowing for an array of FBG sensors to be interrogated simultaneously, sharing the same broadband light source (BLS) and interrogation system. In the second technique, the optical power reflected by a single sensing FBG is modulated directly by the transmission spectrum of the BLS, allowing for a simpler interrogation system. Both techniques rely on a compact, low-cost optoelectronic circuit developed for the acquisition and measurement of the optical signals. With resolutions of up to 1.26 pm for a mechanical strain sensor, or an equivalent 0.09 °C for a temperature sensor, experimental results show that both techniques are accurate, reliable, and suitable for applications where the only requirement is the monitoring of the spectral position of the Bragg wavelength ($\lambda_{\text{B}}$) of the FBG sensors, replacing more expensive, general-purpose FBG interrogators available in the market. Since FBGs are passive, lightweight, and provide dielectric insulation, the proposed techniques are suitable for temperature or mechanical strain measurements in hostile environments in which the use of conventional sensors must be avoided, such as in high voltage power lines and cables, and explosive atmospheres.

Assessment of the performance of fibre optic sensor designs based on two FBGs

Experimental evaluation of low-cost interrogation techniques for FBG sensors

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

Influence of fiber Bragg grating spectrum degradation on the performance of sensor interrogation algorithms

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

A Novel Fiber Bragg Grating Sensor Interrogation System Utilizing a Tunable Fabry-Perot Filter

FBG sensor strain performance analysis using optisystem software too

Design of Fiber Bragg Grating Sensor Networks

Optical low-coherence reflectometry for a distributed sensor array of fiber Bragg gratings

A New Designed FBG and Φ-OTDR Hybrid System for Vibration and Temperature Sensing

FBG Sensor Interrogation Based on RF Signal Measurement

On-line Writing of Fiber Bragg Grating Array on a Two-mode Optical Fiber for Sensing Applications

Fiber Bragg grating sensors for monitoring of physical parameters: a comprehensive review

High Resolution and Wide Scale Fiber Bragg Grating Sensor Interrogation System

A Study on Sensing Network Using a Strain Gauge to Interrogate t he Wavelength Shift of Fiber Bragg Gratings

Simultaneous position and displacement sensing using two fibre Bragg grating sensors

Fiber-Bragg-Grating-Based Displacement Sensors: Review of Recent Advances

Review of fiber Bragg grating sensor technology

Temperature-Insensitive Fibre-Optic Acceleration Sensor Based On Intensity-Referenced Fibre Bragg Gratings