Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Optimization method of burnable poison based on genetic algorithm and artificial neural network

Multiobjective Genetic Algorithm Strategies for Burnable Poison Design of Pressurized Water Reactor

Multi-objective Optimization of Operating Parameters Based on Neural Network and Genetic Algorithm in the Blast Furnace

A P systems based hybrid optimization algorithm for parameter estimation of FCCU reactor–regenerator model

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Multi-objective Intelligent Optimization of Injection Molding Parameters Based on BP-NSGA

Hybrid-Model-Based Intelligent Optimization of Ironmaking Process

Multi-objective Optimization Method of Blast Furnace Operation Performance Indicators Based on Data and Knowledge

Genetic Algorithm for the Optimization of the Loading Pattern for Reactor Core Fuel Management

Combining Neural Network and Genetic Algorithms to Optimize Low Nox Pulverized Coal Combustion

Research on In-Core Fuel Loading Optimization of PWR Nuclear Power Plants with Burnable Absorber Fuel

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Optimization of BP neural network for fault parameter prediction in nuclear power plants utilizing the firefly algorithm

A Novel Method for Controlling Crud Deposition in Nuclear Reactors Using Optimization Algorithms and Deep Neural Network Based Surrogate Models

Comparative study of meta-heuristic algorithms for reactor fuel reloading optimization based on the developed BP-ANN calculation method

Multi-objective Optimization of the Coal Combustion Performance with Artificial Neural Networks and Genetic Algorithms

Loading pattern optimization cooperatively using two new algorithms

Optimization of an explosive waste incinerator via an artificial neural network surrogate model

Radial Basis Function Surrogate Model-Based Optimization of Small Light-Weight Lead-Bismuth Reactor Core

Optimizing pulverized coal combustion performance based on ANN and GA

Genetic Algorithm Optimization of the First Cycle Loading for the Daya Bay Nuclear Plant