Abstract:The design of burnable poisons (BPs) can compensate for excess reactivity at the beginning of lifetime of nuclear reactors and flatten power distribution, which is especially important for long-cycle nuclear reactors. The design of BPs requires the optimization of material type, purity, layout, axial division of the BPs, so that the reactivity introduction at the beginning of life, poisons residues at the end of life, fuel utilization and power flattening can be comprehensively optimized, which is a multi-input multiobjective optimization problem. At present, the traditional optimization design mainly relies on the subjective experience and judgment of designers, which is complicated and time-consuming. Therefore, the efficiency and reliability of BPs design urgently need to be improved. In this article, the mathematical model of multiobjective optimization based on genetic algorithm (GA) was established for BPs design in pressurized water reactor (PWR) fuel assembly. Then, optimization program was developed by combining parallel multiobjective GA with Monte Carlo particle transport code Reactor Monte Carlo as the neutronics and depletion solver. The optimization method and program were applied to the BPs design in two-dimensional and three-dimensional fuel assembly of PWR. The optimization schemes of BPs searched by GA were similar to the schemes by the manual search of designers for two-dimensional assembly in the previous research. The developed optimization method and program were proved to be effective for BP designs of PWR assembly, which do not require the manual experience of designers for searching the optimization scheme. This article provided useful methods and tools for BPs design of nuclear reactors.

Genetic Algorithm Optimization of the First Cycle Loading for the Daya Bay Nuclear Plant

PWR Equilibrium Cycle Optimization by Using Genetic Algorithms

Hybrid optimization algorithm for load model parameter identification

Genetic Algorithm for the Optimization of the Loading Pattern for Reactor Core Fuel Management

Multi-objective Optimization of Operating Parameters Based on Neural Network and Genetic Algorithm in the Blast Furnace

Single-cycle and equilibrium-cycle reloading optimization on real nuclear power plant

Research on In-Core Fuel Loading Optimization of PWR Nuclear Power Plants with Burnable Absorber Fuel

Optimization on plant-level AGC coal consumption curve based on operation mode of pulverizing systems

Loading Pattern Optimization for NHR 200 MW Using Simulated Annealing

Loading pattern optimization cooperatively using two new algorithms

A study on load dispatch among thermal power units based on Genetic Algorithm

Application of genetic algorithms in optimization of SFR nuclear reactor design

Loading pattern optimization of VVER-1000 reactor core based on the discrete golden eagle optimization algorithm

Application of CSA to loading pattern optimization problems for reload core in nuclear power plant

Multiobjective Genetic Algorithm Strategies for Burnable Poison Design of Pressurized Water Reactor

In-Core Fuel Management Design of Large Power PWR

An Improved Genetic Algorithm for Global Optimization of Electromagnetic Problems

Efficient optimization of an accelerator neutron source for neutron capture therapy using genetic algorithms

Comparative study of meta-heuristic algorithms for reactor fuel reloading optimization based on the developed BP-ANN calculation method

Improved Genetic Algorithm for Economic Load Dispatch in Hydropower Plants and Comprehensive Performance Comparison with Dynamic Programming Method

Modular Modeling and Trust Region Based Real-Time Optimization for Load Changes in Modular High Temperature Gas-Cooled Reactor