Experimental Investigation of Sulfur and Nitrogen Oxide Emissions and Corrosion Propensity During the Combustion of Coals and Biomass Fuels
Feri Karuana Adi Prismantoko Hanafi Prida Putra Ade Sana Ruhiyat Arif Darmawan I Nyoman Agus Adi Saputra Muhammad Syahril Hari B. Vuthaluru Muhammad Akhsin Muflikhun Hariana Hariana a Department of Mechanical and Industrial Engineering,Gadjah Mada University,Yogyakarta,Indonesiab Research Organization for Energy and Manufacture,National Research and Innovation Agency,South Tangerang,Indonesiac Mechanical Engineering Department,Sepuluh Nopember Institute of Technology,Surabaya,Indonesiad WASM-Minerals,Energy and Chemical Engineering,Curtin University,Perth,Australia
DOI: https://doi.org/10.1080/00102202.2024.2392004
IF: 1.9
2024-08-22
Combustion Science and Technology
Abstract:The increasing use of biomass in Indonesian coal-fired power plants, mainly through co-firing, presents challenges due to different fuel characteristics, which can affect gas emissions, ash deposition, and combustion efficiency. This study assesses flue gas emissions (SO 2 and NO x ) and corrosion tendencies of various biomass types and coal. The study begins with characteristic testing and ash analysis of coal and biomass samples, including proximate, ultimate, and calorific value analyses, to determine their suitability as fuels. Preliminary calculations predict flue gas emissions and ash deposit formation, followed by laboratory-scale combustion experiments using a DTF to assess flue gas and ash deposit characteristics. The results show that sulfur in biomass is converted to the gas phase up to 99%, while in coal, it is converted up to 95% at high temperatures. NO x levels are primarily affected by the nitrogen contents of the fuels; for instance, Coal-B at 0.88 wt% produces less NO x than solid recovered fuel (SRF) and refused derived fuel (RDF) with 1.73 wt% and 1.51 wt%, respectively, yet still generates higher emissions than the other three biomass types. In general, wood chips (WC), rise husk (RH), and palm kernel shell (PKS) emit 30–80% less flue gas compared to coal. However, ash deposition results indicate that PKS, SRF, and RDF exhibit corrosion tendencies due to the dominance of albite (NaAlSi 3 O 8 ) in the mineral phase. Additionally, the high chlorine content in SRF (0.544 wt%) and RDF (0.224 wt%) leads to the formation of sticky ash deposits, which potentially impact heat transfer surfaces. These findings contribute to identifying suitable biomass types for both co-firing or dedicated combustion in coal-fired power plants.
energy & fuels,engineering, chemical,thermodynamics, multidisciplinary