Abstract:The abundance of palm oil plantation waste in Indonesia can be utilized as a raw material for making carbon black, which currently relies on fossil fuel-based raw materials. Out of the five types of palm oil biomass waste, including empty fruit bunches (EFB), palm kernel shells (PKS), palm mesocarp fibers (PMF), oil palm fronds (OPF), and oil palm trunks (OPT), one will be chosen as the raw material for carbon black production. Palm oil biomass waste typically has a relatively high ash content. To reduce the ash content, the biomass must first undergo pyrolysis to transform it into pyrolysis oil. The higher the carbon content and the lower the oxygen content, the more the pyrolysis oil meets the criteria for replacing crude oil. Among the criteria mentioned, the lowest ash content is found in palm kernel shells (1.4%). The highest carbon content is in palm trunks (55.8%), while the lowest oxygen content is also in palm kernel shells (34.5%). Palm kernel shells are the best palm oil biomass that can be used as a raw material for carbon black. However, because palm kernel shells are commonly used as boiler fuel, the second choice is palm trunks due to their high carbon content. Pyrolysis experiments were conducted using palm trunk biomass to produce bio-oil, which would be further processed into carbon black. The palm trunks were divided into three parts: outer trunk, middle trunk, and core trunk. The biomass size was also varied, with sizes of 20 mesh and 40 mesh. The pyrolysis process used a fixed bed reactor with a heating rate of 3°C/minute, reaching a pyrolysis temperature of 600°C, and maintaining that temperature for 1.5 hours. The highest yield of bio-oil obtained was from the outer trunk with a biomass size of 40 mesh (36.8%). Similarly, for a size of 20 mesh, the highest yield was also from the outer trunk (35.7%).

Combustion temperature analysis in a fluidized-bed reactor by utilizing palm oil biomass for a renewable energy

Experimental Study on Pyrolysis and Combustion Properties of Biomass Briquette.

Investigation of the combustion and ash deposition characteristics of oil palm waste biomasses

Combustion of oil palm stone in a pilot-scale fluidised bed reactor

Experimental Study on Biomass Pyrolysis in Fluidized Bed

Experimental Performance Analysis of a Pilot-Scale Biomass-Assisted Recirculating Mixed-Flow Dryer for Drying Paddy

Pyrolysis and combustion of oil palm stone and palm kernel cake in fixed-bed reactors.

Experimental Study of Combustion Chamber Performance Utilizing Biochar from Empty Fruit Bunch (EFB) as Fuel with Variation in Excess Air

Combustion performance evaluation of air staging of palm oil blends

Improvement of Biocoal Quality from Empty Oil Palm Fruit Bunches by Using Peat Water to Reducing Potassium Content and Torrefaction at 300°C to Increasing Heating Value

Co-combustion performance of oil palm biomass with coal: thermodynamics and kinetics analyses

Oil Palm Wastes Co-firing in an Opposed Firing 500 MW Utility Boiler: A Numerical Analysis

Flash Pyrolysis of Biomass Particles in Fluidized Bed for Bio-Oil Production

Investigating fouling deposition during combustion of hydrothermally treated palm empty fruit Bunch: Pilot-Scale study for industrial hydrothermal reactor

Flash pyrolysis of biomass for bio-oil in a fluidized bed reactor

Improving the Quality of Fast Pyrolysis Bio-oil (Liquid Fuel) using Thermal Distillation Method

Experiment and Numerical Studies of the Effect of Equivalent Ratio on Combustion Characteristics in Fluidized Bed Gasifier

SPRAY COMBUSTION AND EMISSIONS OF A HYDROTHERMAL LIQUEFACTION BIOFUEL FOR GAS TURBINE APPLICATIONS

Characterization of Reactivity Enhancement Coal Combustion with Empty Fruit Bunches Using Thermogravimetry Analysis

Pyrolysis of oil palm trunk biomass using a fixed bed reactor to produce raw material for bio-carbon black

Torréfaction to improve biomass pellet made of oil palm empty fruit bunch