DEM/CFD Simulation in Process Engineering

Viktor Scherer,Dominique Thévenin

DOI: https://doi.org/10.1002/ceat.202370704

2023-06-21

Abstract:Chemical Engineering &Technology, Volume 46, Issue 7, Page 1316-1316, July 2023.

engineering, chemical

What problem does this paper attempt to address?

Review and implementation of CFD-DEM applied to chemical process systems

Shahab Golshan,Rahmat Sotudeh-Gharebagh,Reza Zarghami,Navid Mostoufi,Bruno Blais,J.A.M. Kuipers

DOI: https://doi.org/10.1016/j.ces.2020.115646

IF: 4.7

2020-08-01

Chemical Engineering Science

Abstract:With increasing the computational resources, the number of publications about coupled computational fluid dynamics – discrete element method is in the rise in the recent years. This technique is very useful, especially in simulation of fluid-solid flows in process engineering. This paper provides an introduction to CFD-DEM modeling in process engineering systems, including heat and mass transfer and long range forces, and reviews the major researches in simulation of two-phase processes such as drying, coating, granulation, crystallization, chemical reactions (including combustion, gasification and pyrolysis) and mixing. Details of implementing unresolved CFD-DEM in these applications are explained in details and major assumptions and findings are discussed.

engineering, chemical
Experimental methods in chemical engineering: Process simulation

Jacopo De Tommaso,Francesco Rossi,Nooshin Moradi,Carlo Pirola,Gregory S. Patience,Federico Galli

DOI: https://doi.org/10.1002/cjce.23857

2020-10-02

The Canadian Journal of Chemical Engineering

Abstract:Process simulation software designs equipment, simulates operations, optimizes a plant's configuration (heat exchangers network, for example), estimates operating and capital expenses, and serves as an educational tool. However, mastering the theoretical background minimizes common mistakes such as applying an incorrect thermodynamic method, selecting improper algorithms in the case of tear systems, and setting irrational system specifications. Engineers and researchers will exploit this tool more often in the future as constant advancements in simulation science as well as new models are released continually. Process simulators make it easier to build digital twins and thus will facilitate the implementation of the industry 4.0 guidelines. We highlight the mathematical and technical features of process simulators, as well as the capabilities and the fields of application. A bibliometric map of keywords from articles citing Aspen+, Aspen plus, Hysys, and Pro/II indexed by Web of Science between 2017 and 2020 identified the main research clusters, such as design, optimization, energy or exergy, biomass; H2 and CO2 capture, thermodynamics; and separations and techno‐economic analysis.This article is protected by copyright. All rights reserved.
Experimental methods in chemical engineering: Unresolved CFD‐DEM

Ariane Bérard,Gregory S. Patience,Bruno Blais

DOI: https://doi.org/10.1002/cjce.23686

2020-01-10

The Canadian Journal of Chemical Engineering

Abstract:CFD‐DEM combines computational fluid dynamics (CFD), which solves the equation of motion of gas or liquids, with the discrete element method (DEM), a simulation technique based on a Lagrangian description of particle motion that predicts the flow of granular matter and powders. Resolved CFD‐DEM solves the transport equations with CFD at a scale smaller than the particle diameter (dp), assuming noslip on the particle surface to couple the phases. The fluid solver scale is coarser than dp in unresolved CFD‐DEM and virtual mass, drag, and other solid‐fluid forces couple the phases. Resolved CFD‐DEM is more accurate, but is orders of magnitude more computationally intensive. Unresolved CFD‐DEM predicts solid distribution, pressure loss, mass flow rate, and dense and dilute phase flow patterns when the solid to fluid and fluid to solid coupling between the fluid phase and the solid phase are non‐trivial. Researchers apply CFD‐DEM to predict gas‐fluid dynamics of fluidized beds, spouted beds, hoppers, cyclones, costal erosion, and rock slides. Open source codes, commercial software, and parallel computer architectures have accelerated its adoption in pharmaceutical, agro‐industrial, and reactor design. Current research targets improving the solid‐fluid coupling strategies and multiphysics problems including heat transfer, mass transfer, and chemical reactions within or at the surface of the particles. The field has grown to over 200 indexed articles per year (Web of Science) in 2018. This article is part of a special series dedicated to experimental methods in chemical engineering that reviews the most important concepts, applications, and limitations of each technique.This article is protected by copyright. All rights reserved.
XDEM multi-physics and multi-scale simulation technology: Review of DEM–CFD coupling, methodology and engineering applications

Bernhard Peters,Maryam Baniasadi,Mehdi Baniasadi,Xavier Besseron,Alvaro Estupinan Donoso,Mohammad Mohseni,Gabriele Pozzetti

DOI: https://doi.org/10.1016/j.partic.2018.04.005

IF: 3.5

2019-06-01

Particuology

Abstract:The extended discrete element method (XDEM) multi-physics and multi-scale simulation platform is being developed at the Institute of Computational Engineering, the University of Luxembourg. The platform is an advanced multi-physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulation tools. For this purpose, the simulation framework relies on coupling various predictive tools based on an Eulerian and Lagrangian approach. The Eulerian approach represents the wide field of continuum models; the Lagrangian approach is perfect for characterising discrete phases. Continuum models thus include classical simulation tools, such as computational fluid dynamics simulation and finite element analysis, while an extended configuration of the classical discrete element method addresses the discrete (e.g., particulate) phase. Apart from predicting the trajectories of individual particles, XDEM-suite extends the application of the XDEM to estimating the thermodynamic state of each particle using advanced and optimised algorithms. The thermodynamic state may include temperature and species distributions due to chemical reaction and external heat sources. Hence, coupling these extended features with either computational fluid dynamics simulation or finite element analysis opens a wide range of applications as diverse as pharmaceuticals, agriculture, food processing, mining, construction and agricultural machinery, metals manufacturing, energy production and systems biology.

materials science, multidisciplinary,engineering, chemical
The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications

Bernhard Peters,Maryam Baniasadi,Mehdi Baniasadi,Xavier Besseron,Alvaro Estupinan Donoso,Mohammad Mohseni,Gabriele Pozzetti

DOI: https://doi.org/10.48550/arXiv.1808.08028

2018-08-24

Computational Engineering, Finance, and Science

Abstract:The XDEM multi-physics and multi-scale simulation platform roots in the Ex- tended Discrete Element Method (XDEM) and is being developed at the In- stitute of Computational Engineering at the University of Luxembourg. The platform is an advanced multi- physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulation tools. For this purpose the simulation framework relies on coupling various predictive tools based on both an Eulerian and Lagrangian approach. Eulerian approaches represent the wide field of continuum models while the Lagrange approach is perfectly suited to characterise discrete phases. Thus, continuum models include classical simulation tools such as Computa- tional Fluid Dynamics (CFD) or Finite Element Analysis (FEA) while an ex- tended configuration of the classical Discrete Element Method (DEM) addresses the discrete e.g. particulate phase. Apart from predicting the trajectories of individual particles, XDEM extends the application to estimating the thermo- dynamic state of each particle by advanced and optimised algorithms. The thermodynamic state may include temperature and species distributions due to chemical reaction and external heat sources. Hence, coupling these extended features with either CFD or FEA opens up a wide range of applications as diverse as pharmaceutical industry e.g. drug production, agriculture food and processing industry, mining, construction and agricultural machinery, metals manufacturing, energy production and systems biology.
CFD-DEM simulations of a fluidized bed crystallizer

Kristin Kerst,Christoph Roloff,Luís G. Medeiros de Souza,Antje Bartz,Andreas Seidel-Morgenstern,Dominique Thévenin,Gábor Janiga

DOI: https://doi.org/10.1016/j.ces.2017.01.068

IF: 4.7

2017-06-01

Chemical Engineering Science

Abstract:In the present study, important features of the two-phase flow in a fluidized bed crystallizer are examined by numerical computations and companion experiments. The simulations are carried out using a coupled CFD-DEM approach (CFD: Computational Fluid Dynamics; DEM: Discrete Element Method). After validating an open-source CFD-DEM software tool for this purpose, regions within the crystallizer with unfavorable hydrodynamic features and thus a negatively impacted process outcome have been identified. This was first accomplished by single-phase CFD simulations. Then, the validated CFD-DEM model delivers valuable information that is difficult or even impossible to measure experimentally with sufficient accuracy, such as the velocity and position of fluidized crystals within the crystallizer. Since the simulations are computationally challenging, a compromise between simulated process time and number of simulated particles must be found. Hence, the CFD-DEM simulations are not utilized to simulate the whole crystallization process, but to examine a short time-window in detail. Corresponding findings confirm proper fluidization of the crystals support the model reduction carried out in a parallel project.

engineering, chemical
Discrete element method and its applications in fluidization

Chilou ZHOU,Yongzhi ZHAO

DOI: https://doi.org/10.3969/j.issn.0438-1157.2014.07.014

2014-01-01

Abstract:After 30 years of development, the discrete element method (DEM) has developed to be a kind of numerical method of particle systems widely used in process engineering. In particular, the CFD-DEM coupling method has been widely used in the researches of fluidization. The DEM models are reviewed firstly, including the basic principles of DEM model, the particle shape model, the contact force model, the non-contact force model, and the fluid force model. Then the CFD-DEM coupling methods and the applications to fluidization are introduced, including the applications in fluidized bed, pneumatic conveying, and some other fields of process engineering. Finally, the future development of DEM and CFD-DEM coupling methods are presented, hoping to promote the development of DEM and its applications in process engineering.
A Process Scaling Approach for CFD-DEM Modelling of Thermochemical Behaviours in Moving Bed Reactors

Qinfu Hou,Dianyu E,Shibo Kuang,Aibing Yu

DOI: https://doi.org/10.1016/j.fuproc.2020.106369

IF: 8.129

2020-01-01

Fuel Processing Technology

Abstract:Intensive heat and mass transfer between continuum fluids and discrete particulate materials plays a critical role in many chemical reactors. The residence and chemical reactions of particulate materials could span over hours. To understand and improve the operation of these reactors, discrete particle models are very helpful and computationally demanding. Different to the previous coarse grain model in reducing computational cost by reducing total particle number with large representative particles, a scaling approach by changing process parameters and thus the time scale is established to significantly reduce computational cost for the combined computational fluid dynamics (CFD) and discrete element method (DEM) modelling of moving bed reactors. The scaled model is first derived based on the governing equations of mass, momentum and energy for two-phase flow and then applied to a moving bed reactor. The results in terms of flow, heat and mass transfer and chemical reactions with different time scaling factors demonstrate that two-order acceleration in terms of computational time can be achieved while reliably representing the same physical process. The possible use of the scaling approach to other systems is discussed. The scaling approach represents a critical step forward towards establishing virtual real-time thermochemical reactors with discrete particle models.
CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Lianyong Zhou,Yongzhi Zhao

DOI: https://doi.org/10.1016/j.ces.2020.116290

IF: 4.7

2021-01-01

Chemical Engineering Science

Abstract:The computational fluid dynamic combining the discrete element method (CFD-DEM) is widely used to comprehend the mechanism of gas-solid flow. However, as a Lagrangian method, DEM suffers from the huge cost for tracking each particle in the systems when applied to industrial applications with billions of fine particles, regardless of the great advances in computing capacity of computers. To address this issue, a coarse-grain (CG) model is proposed in this paper, where the original fine particles are represented by a small number of large-sized CG particles. In the current study, the new-developed CG model combining CFD-DEM (CG CFD-DEM) is applied to investigate the fluidized bed with an immersed tube. The applicability and accuracy of the proposed CG CFD-DEM are validated by the good agreement of the macroscopic behaviors predicted by simulations and those obtained from experiments. For the first time, the CG CFD-DEM is used to predict the erosion around the tube based on the shear impact energy model (SIEM), and the computational results calculated by CG CFD-DEM and original CFD-DEM agree well, which demonstrates that the proposed model can predict the erosion of the tube in the fluidized bed accurately and efficiently. Besides, as expected, the calculation time is drastically reduced due to the CG model, which makes the simulations of large-scale industrial applications accessible. (C) 2020 Elsevier Ltd. All rights reserved.
CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

ZHAO Yongzhi,CHENG Yi,DING Yulong,JIN Yong

DOI: https://doi.org/10.3321/j.issn:0438-1157.2007.06.010

2007-01-01

Abstract:The gas-solid flow and mixing behavior in two dimensional downers with different entrance structures were simulated by using a CFD-DEM method.A gas-solid catalytic reaction model was incorporated in the governing equations to investigate the contact efficiency between phases.The simulations showed the dynamic and time-averaged flow structures characterized by the distributions of solids fraction, particle velocity and the reaction product in the whole downer as well as the residence time distributions (RTDs) of gas and solids, which were all heavily influenced by the design of the entrance structure.Non-ideal initial contact between gas and solids would cause wide RTDs of gas and worsen the reactor performance.
CFD-DEM simulation of particle coating process coupled with chemical reaction flow model

Meng Chen,Zhao Chen,Yaping Tang,Malin Liu

DOI: https://doi.org/10.1515/ijcre-2020-0241

IF: 1.636

2021-03-09

International Journal of Chemical Reactor Engineering

Abstract:Abstract Particle coating process, one of the main methods to improve the particle properties, is widely used in industrial production and pharmaceutical industry. For the scale up and optimization of this process, a mechanistic and detailed study is needed or numerical simulation as an alternative way. Decomposition of substances usually involves multiple chemical reactions and produces multiple substances in the actual chemical reaction. In the study, a chemical reaction flow (CRF) model has been established based on kinetic mechanism of elementary reaction, the theory of molecular thermodynamics and the sweep theory. It was established with the comprehensive consideration of the decomposition of substances, deposition process, adhesion process, desorption process, hydrogen inhibition, and clearance effect. Then the CFD-DEM model was coupled with CRF model to simulate particle coating process by FB-CVD method, and the CFD-DEM-CRF coupling model was implemented in the software Fluent-EDEM with their user definition function (UDF) and application programming interface (API). The coating process in the spouted bed was analyzed in detail and the coating behavior under different conditions were compared at the aspects of CVD rate, coating efficiency, particle concentration distribution, particle mixing index and gas concentration distribution. It is found that the average CVD rate is 6.06 × 10 −4 mg/s when the inlet gas velocity is 11 m/s and bed temperature is 1273 K, and simulation result agrees with the experimental result well. Average CVD rate and coating efficiency increase with temperature increasing, but decrease acutely with mass fraction of injected hydrogen increasing. The CFD-DEM-CRF coupling model can be developed as a basic model for investigating particle coating process in detail and depth and can provide some guidance for the operating conditions and parameters design of the spouted bed in the real coating process.

engineering, chemical
Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

B. Ashraf Ali,M. Börner,M. Peglow,G. Janiga,A. Seidel-Morgenstern,D. Thévenin,M. Börner,D. Thévenin

DOI: https://doi.org/10.1021/cg501092k

2014-12-12

Abstract:Computational fluid dynamics (CFD) coupled with the discrete element method (DEM) has been used to investigate numerically crystal dynamics in an existing pilot-scale batch crystallizer. The CFD-DEM combination provides a detailed description of crystal dynamics considering a four-way coupling. In a previous analysis, CFD had been coupled with a discrete phase model (DPM) using a simple one-way coupling. The corresponding predictions are then compared with those obtained through four-way coupling considering KH2PO4 crystals in water. From the CFD-DEM simulation, it is possible to investigate quantitatively the driving force controlling crystal growth and the interaction of crystals with reactor walls, baffles, and impellers. This delivers essential data for process improvement. Different seeding procedures were also compared. The seed crystals have been injected either within the complete liquid volume or, as in the experiments, through a funnel. By varying the most important crystallization process parameters, we found optimal conditions for a liquid phase volume in the crystallizer of 24 L, for injection through a funnel above the baffle, and for an initial seed crystal size of 0.5 mm.

chemistry, multidisciplinary,materials science,crystallography
The transformative role of Computational Fluid Dynamics (CFD) in chemical engineering

Bibhab Kumar Lodh,Lodh Bibhab Kumar

DOI: https://doi.org/10.17352/ojc.000033

2024-03-12

Open Journal of Chemistry

Abstract:Chemical engineering is a discipline intrinsically linked to fluid behavior. From reaction kinetics to reactor design, understanding how fluids flow, mix, and transfer heat is paramount. Traditionally, this relied heavily on experimentation, a time-consuming and resource-intensive process. The emergence of Computational Fluid Dynamics (CFD) has revolutionized the field, offering a powerful in-silico approach to analyze fluid dynamics in chemical engineering processes. This review paper explores the transformative role of CFD, examining its impact on various aspects of chemical engineering, including reactor design, optimization, process intensification, scale-up, and safety analysis. The paper also discusses the challenges associated with CFD simulations, ongoing advancements in the field, and potential future directions.
CFD Simulation of Dense Particulate Reaction System: Approaches, Recent Advances and Applications

Wenqi Zhong,Aibing Yu,Guanwen Zhou,Jun Xie,Hao Zhang

DOI: https://doi.org/10.1016/j.ces.2015.09.035

IF: 4.7

2015-01-01

Chemical Engineering Science

Abstract:Dense particulate reaction system (DPRS) is quite common in many engineering fields such as energy conversion, petro-chemical processing, mineral processing, chemical engineering and pharmaceutical manufacturing. These kinds of processes are extremely complex involving both physical changes and chemical changes. Understanding the fundamentals governing the gas–particle flow and coupled heat and mass transfer is of paramount importance to the design, control and optimization of DPRS of various types. Computational fluid dynamics (CFD) has been recognized as a useful tool to achieve this goal. This paper provides a review of the CFD work in the simulation. The CFD approaches are categorized into Eulerian–Eulerian and Eulerian–Lagrangian ones. Detailed description and coupling scheme of gas–particle flow and chemical reaction of the two approaches are presented separately. An updated survey of published CFD studies is summarized. The developed models are shown to primarily involve Eulerian multi-fluid model, CFD-DEM (discrete element method) model and/or MP-PIC (multiphase particle-in-cell) model. Their respective advantages and limitations in application are analyzed. Finally, challenges and needs for future research are discussed.
Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Zhenjiang Zhao,Ling Zhou,Ling Bai,Mahmoud A. El-Emam,Ramesh Agarwal

DOI: https://doi.org/10.1063/5.0146264

IF: 4.6

2023-04-07

Physics of Fluids

Abstract:Computational fluid dynamics (CFD) combined with the discrete element method (DEM) are powerful tools for analyzing dense gas–solid flows. However, the computational cost of CFD–DEM will be unfeasibly great when simulating large-scale engineering applications with billions of particles. Accordingly, the coarse-grained (CG) CFD–DEM method is applied to solve this problem. This investigated method replaces several smaller particles with larger ones called parcels, aiming to reduce the number of particles and fully consider the collision of particles between composition parcels and the collision of particles within composition parcels. First, high-speed photography verifies the numerical simulation's reliability. Then, the CG CFD–DEM was used to analyze the transient spatial distribution, transient average velocity, pressure drop, bed height, and the mixing state of particles in a dense gas–solid fluidized bed. The CG CFD–DEM was also compared with the CFD–DEM results, which showed a good agreement with the calculation results and proved the accuracy and applicability of the method. Finally, the computation time of the CG CFD–DEM was evaluated, showing a significant decrease in computation time with an increasing coarse ratio ( k ). This investigation can provide theoretical reference for the numerical simulation of the CG CFD–DEM method in dense gas–solid flow.

mechanics,physics, fluids & plasmas
DEM--CFD modeling and simulations of hydrodynamic characteristics and flow resistance coefficient in fixed-bed reactors

Yaping Li,Le Xie,Yonghua Zhou,Chongwen Jiang,Hong Zhong

DOI: https://doi.org/10.22541/au.160990464.47300966/v1

2021-01-01

Abstract:The ability to predict void fraction, pressure drop, and flow resistance coefficient in fixed-bed reactors is significant to their optimal design. In this study, the discrete element method (DEM) is combined with computational fluid dynamics (CFD) to simulate the hydrodynamic characteristics of fixed-beds. A realistic random packing structure for fixed-beds with spherical particles was generated via the DEM method and then meshed using Ansys ICEM software for the CFD simulation. A grid independency study was performed to select appropriate grid model parameters. A large set of numerical experiments was conducted to investigate the hydrodynamic characteristics with respect to different inlet velocities and particle sizes, and the simulated pressure drop data were used to calculate the flow resistance coefficient. The output flow resistance coefficients agreed well with those calculated by the classical models in laminar and turbulent flow regimes, thereby indicating the accuracy and advantage of the proposed DEM–CFD approach.
Exploring advanced process equipment visualization as a step towards digital twins development in the chemical industry: A CFD-DNN approach

Dela Quarme Gbadago,Jiyoung Moon,Sungwon Hwang

DOI: https://doi.org/10.1007/s11814-022-1273-2

IF: 2.7

2023-01-05

Korean Journal of Chemical Engineering

Abstract:Several studies involving the implementation of artificial neural network (ANN) technology for process design, monitoring, and control are under active research. This new technology has shown great potential in advancing chemical processes through the development of digital twins and smart factories. In joining this race, the current study explores the capability of physics-based modeling (CFD) and artificial neural networks for advanced process data visualization. Here, 20 CFD simulations of a multi-tubular reactor equipped with a Zn-Fe-Cr catalyst for synthesizing butadiene were executed. The simulation result was extracted as 3-D data with XYZ coordinates and imported into a python-based DNN model for training and cross-validation. An accuracy of 99.2% was obtained from the ANN surrogate model. The trained model was used to predict 3D data in terms of the process temperature, concentration, etc. The 3D data was then imported into a Paraview® VTK for detailed virtualization. Cross-sectional, longitudinal, and radial distribution of the various process variables, such as concentration profiles and pressure contour, were effectively visualized. A graphic user interface was further developed using Python for real-time visualization of the equipment. This implementation is analogous to the digital twin and is employable for online system optimization, high accuracy, low computational cost, and seamlessly integrable 3D real-time visualization system design for efficient, quick, and easy plant decision-making.

engineering, chemical,chemistry, multidisciplinary
Computational Fluid Dynamics–Discrete Phase Method Simulations in Process Engineering: A Review of Recent Progress

Xiaolian Yang,Te Xi,Yebo Qin,Hui Zhang,Yongwei Wang

DOI: https://doi.org/10.3390/app14093856

2024-01-01

Applied Sciences

Abstract:Complex fluid–solid systems generally exist in process engineering. The cognition of complex flow systems depends on numerical and experimental methods. The computational fluid dynamics–discrete phase method simulation based on coarsening technology has potential application prospects in industrial-scale equipment. This review outlines the computational fluid dynamics–discrete phase method and its application in several typical types of process engineering. In the process research, more attention is paid to the dense condition and multiphase flow. Furthermore, the CFD-DPM and its extension method for comprehensive hydrodynamics modeling are introduced. Subsequently, the current challenges and future trends of the computational fluid dynamics–discrete phase method are proposed.
Review on Modeling and Simulation of the Electric Arc Furnace (EAF)

Hans-Jürgen Odenthal,Andreas Kemminger,Fabian Krause,Lukas Sankowski,Norbert Uebber,Norbert Vogl

DOI: https://doi.org/10.1002/srin.201700098

IF: 2.1258

2017-11-28

steel research international

Abstract:The exponential growth of computing power in the last two decades opens up entirely new options for numerical simulations of the Electric Arc Furnace (EAF). Simulations can be used to analyze physical phenomena resisting direct observation or operational measurement even to this very day. This paper gives an overview of the state‐of‐the‐art of the Computational Fluid Dynamics (CFD) simulation on the EAF as well as an outlook on future fields of application, while being well aware that by far not all phenomena and literature can be used. The paper makes no claim to exhaustiveness, especially since three subjects of simulation technology have to be excluded: Process models for furnace controlling, stress calculations, electromagnetic simulations. Thus, the focus is on the fluid‐ and thermo‐dynamic furnace processes and on fundamental methods that can be applied to examine these processes. The basic EAF functionalities and selected fluid‐dynamic simulations are presented, for example, on multiphase flow, thermal loading of refractory lining and wall panels, chemical reactions and post‐combustion, oxygen injection technology, and bottom tapping. An overview of the state‐of‐the‐art of the Computational Fluid Dynamics (CFD) simulation on the Electric Arc Furnace (EAF) is given. The focus is on fluid‐ and thermo‐dynamic processes and numerical models developed to investigate these processes. EAF functionalities and simulation results are discussed, for example, multiphase flow, thermal loading of refractory or panel, injection technology, bottom tapping, post‐combustion. An outlook on future fields of applications is also given.

metallurgy & metallurgical engineering

DEM/CFD Simulation in Process Engineering

Review and implementation of CFD-DEM applied to chemical process systems

Experimental methods in chemical engineering: Process simulation

Experimental methods in chemical engineering: Unresolved CFD‐DEM

XDEM multi-physics and multi-scale simulation technology: Review of DEM–CFD coupling, methodology and engineering applications

The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications

CFD-DEM simulations of a fluidized bed crystallizer

Discrete element method and its applications in fluidization

A Process Scaling Approach for CFD-DEM Modelling of Thermochemical Behaviours in Moving Bed Reactors

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

CFD-DEM simulation of particle coating process coupled with chemical reaction flow model

Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

The transformative role of Computational Fluid Dynamics (CFD) in chemical engineering

CFD Simulation of Dense Particulate Reaction System: Approaches, Recent Advances and Applications

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

DEM--CFD modeling and simulations of hydrodynamic characteristics and flow resistance coefficient in fixed-bed reactors

Exploring advanced process equipment visualization as a step towards digital twins development in the chemical industry: A CFD-DNN approach

Computational Fluid Dynamics–Discrete Phase Method Simulations in Process Engineering: A Review of Recent Progress

Review on Modeling and Simulation of the Electric Arc Furnace (EAF)