Abstract:Emissions of soot particles exert crucial impact on human health and the environment. Previous researches show that a partial replacement of fossil fuels with oxygenated fuels is supposed to reduce soot emission. However, the crucial information of soot size distributions is unclear, although small particles are more dangerous than large particles. In this paper, dimethyl ether (DME) is selected among the oxygenated fuels for the investigation of the doping effect on nascent soot formation. DME was doped in the burner-stabilized rich premixed ethylene/oxygen/argon flames at various mixing ratios. Flame temperature profiles were measured using R-type thermocouples with radiation correction. A scanning mobility particle sizer (SMPS) with a sampling system was used to determine particle size distributions (PSDs) of soot-containing combustion products with immediate dilution. Thermo-gravimetric analysis (TGA) complemented with elemental analysis (EA) was conducted to detect the chemical properties of formed soot particles. Additionally, species profiles of the experimental flame conditions were provided from simulations. The experimental PSDs showed that DME addition could slow down soot evolution process, while lead to a slight increase in incipient soot with size below 4 nm. When DME added, the production of benzene was suppressed due to the reduced concentrations of acetylene and propargyl, and thus soot nucleation. Meanwhile, soot oxidiation was enhanced because the OH radical and the oxidizability of soot particles are both increased. Considering the slight increase of sub-4 nm soot, the effect of oxygenated-PAHs (OPAH) was emphasized. The production of OPAH suppressed soot surface growth, which leading to the relatively lower consumption of sub-4 nm soot in DME added flames. As a result, DME cannot be simply regarded as a clean fuel due to the enhanced formation of sub-4 nm soot particles. When applying oxygenated fuels into practice, it is necessary to pay more attention to the size distributions of the emitted particles, and conduct appropriate post-processing techniques to reduce the emissions of small particles. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Study on Dimethyl Ether Used as New Aerosol Propellant

Study on injection characteristics of diesel and DME

Experimental studies on the flammability of mixtures of dimethyl ether

An Experimental Study of the Dimethyl Ether (DME) General Spary Characteristics

Study on Spray Characteristics of Dimethyl Ether

Research Progress of Emulsion Adhesives

The Study on Preparation and Combustion of Diesel-Methanol Micro-Emulsified Fuel

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Spray model and experimental research of dimethyl ether

Spray Characteristics Study Of Dmf Using Phase Doppler Particle Analyzer

Research Progress on the Direct Dimethyl Ether Fuel Cell

One-step Synthesis of Dimethyl Ether from Semi-water Gas for Industrial Trial Production

Productive Process of Dimethyl Ether and Fuel Application

Spray Characteristics and Engine Adaptability of 2,5-Dimethylfuran

Study on Emission Characteristics of Direct Injection Diesel Engine Fueled with Dimethyl Ether

Investigation on the Spray Characteristics of DMF- Isooctane Blends Using PDPA

Formulation and Characterization of Matrine Oil Dispersion to Improve Droplet Wetting and Deposition

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

A Numerical Study on Spray Combustion and Emissions Characteristics of n-Heptane, Dimethyl Ether, and Their Blends in a Constant Volume Combustion Chamber

Modification and Application Performance Study of Ultra-Fine Dry Powder Extinguishing Agent