Abstract:The optimal composition of Fiberglass, Kevlar, and high speed high temperature fiberglass (HSHT) in micro carbon fiber filled nylon polymer enhances properties like strength, wear resistance, and surface finish. Thus, the polymer composite fabricated by mixing Fiberglass, Kevlar, and HSHT in micro carbon fiber filled nylon filament designed to create strong, high-quality unrivalled parts will be extensively used in aerospace, automotive industry, and various engineering applications. In this work, continuous layers of Fiberglass, Kevlar, and HSHT have been reinforced in micro carbon fiber filled nylon filament to fabricate the composite at variable process parameters like fiberfill type, the thickness of the fiber layer, and the nature of the reinforcement. The tensile strength, wear strength, and surface roughness have been investigated for each test specimen using Universal Testing Machine, Pin on disc, and surfcom roughness tester as per American standards of testing (ASTM) ASTM D638 Type IV and ASTM G99 standard. Response surface methodology (RSM) has been implemented using a central composite design (CCD) approach for the modelling between input parameters and output responses. It is observed that fiber layer thickness of 1.071 mm, fiberglass and isotropic fill pattern provide the maximum tensile strength of 139 MPa, the minimum surface roughness of 3.087 μm, and wear rate of 0.4262 mm 3 /m. Further, the MOGA-ANN approach is used to optimize the multi response objectives. It is observed that 0.744 mm of fiber layer thickness, fiberglass reinforcement, and isotropic infill pattern provide the maximum tensile strength of 152.80 MPa and minimum surface roughness of 2.83 μm, 0.11709 mm 3 /m wear rate in MOGA-ANN. The balance and optimal response are accomplished in MOGA-ANN evolutionary hybrid algorithm, and the same has been validated experimentally. Data availability statement Data used for this research paper is available upon request from the corresponding author. Data are provided in detail for all methods, results, and conclusions drawn throughout the paper.

Fabrication and analysis of ABS-HDPE-PC composite polymer filament used for FDM printing using hybrid algorithm

Performance Analysis of Acrylonitrile–Butadiene–Styrene–Polycarbonate Polymer Blend Filament for Fused Deposition Modeling Printing Using Hybrid Artificial Intelligence Algorithms

Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

Mechanical investigations on secondary recycled ABS-based composite multi-layered tensile and flexural specimens prepared by fused filament fabrication

Dual material fused filament fabrication of composite core‐shell structures with improved impact resistance and interfacial adhesion

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Investigation of Fused Filament Fabrication-Based Manufacturing of ABS-Al Composite Structures: Prediction by Machine Learning and Optimization

Hybrid additive manufacturing of highly sustainable Polylactic acid -Carbon Fiber-Polylactic acid sandwiched composite structures: Optimization and machine learning

Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid

Development and characterization of groundnut shell‐derived biocarbon‐reinforced polylactic acid composite filaments for FDM

Experimental and multiscale analysis of volume fraction effects in tensile properties of recycled PLA-PDA/kenaf fiber 3D printing filament composites

An experimental analysis of mechanical properties for a dissimilar pattern structure in the 3-D printing of a PLA5F filament using the Taguchi method

Modelling and prediction of mechanical properties of FFF-printed polycarbonate parts using ML and DA hybrid approach

Optimization of Glass-Powder-Reinforced Recycled High-Density Polyethylene (rHDPE) Filament for Additive Manufacturing: Transforming Bottle Caps into Sound-Absorbing Material

On Almond Skin Powder Reinforced PA6 Composite for 3D Printing Applications

Fundamental study and modification of Kenaf fiber reinforced polylactic acid bio-composite for 3D printing filaments

Investigation of Fused Deposition Modelling Process Parameters in 3D Printing for Composite Material (Poly Lactic Acid and Banana Fibre)

Mechanical Properties of PC-ABS-Based Graphene-Reinforced Polymer Nanocomposites Fabricated by FDM Process

3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties