Abstract:Summary Drilling becomes extremely challenging when dealing with naturally fractured reservoirs (NFR). A comprehensive solution is developed in this study to perform qualitative analysis on drilling fluid loss rate and volume to examine how they can be affected by NFR characteristics, drilling fluid rheology, leakoff phenomenon, and wellbore condition. In this regard, the solution is applied to generate type curves to facilitate the sensitivity analysis (refer to the provided Supplementary Materials). The presented solution accounts for not only drilling fluid pseudoplasticity in the total system but also matrix medium under wellbore constant pressure assumption (by including dimensionless matrix contribution parameter). It is also able to measure mud loss advancement not only through NFR but also through homogeneous reservoirs. The developed solution is validated by reducing it to the preexisting solution (designed for Newtonian fluid case) by incorporating assumptions into it. The result demonstrates the significance of NFR properties and drilling fluid pseudoplasticity on the leakoff phenomenon and total loss volume, especially when constant pressure is established inside the wellbore. The finding reveals that three periods can be identified through generated type curves depending on NFR characteristics, drilling fluid rheology, and leakoff coefficient. Therefore, different drilling fluids with specific pseudoplasticity should be used in each period to mitigate drilling fluid loss effectively. In this regard, the study is supposed to design drilling fluid in a way to maintain its pseudoplasticity at a higher level at early and late times, while being maintained at a lower level during the transient period, a critical aspect for managed pressure drilling techniques, particularly in the context of dual-gradient drilling applications. Additionally, a procedure should be implemented to lessen the transient period while attempting to keep drilling fluid advancement occurrence at a lower rate, which shows that drilling fluid pseudoplasticity can be used as an effective tool to manage this period. The obtained result also indicates that the importance of drilling fluid rheology to control total loss volume is greater for NFR with higher leakoff than with lower leakoff. Furthermore, the greater the differential pressure inside the wellbore, the greater the importance of mud rheology to reduce drilling fluid loss. The outcome of the study not only facilitated qualitative and quantitative analyses through NFR but also enabled decision-makers to instantaneously select optimal wellbore conditions and drilling fluid pseudoplasticity.

An updated numerical model of fracture fluid loss coupled with wellbore flow in managed pressure drilling

A Semi-Analytical Approach to Model Drilling Fluid Leakage Into Fractured Formation

Qualitative Analysis of Drilling Fluid Loss Through Naturally-Fractured Reservoirs

Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe

Study on Radial Leakage Model and Law of Fractured Formation Drilling Fluid

A semi‐analytical model for capturing dynamic behavior of hydraulic fractures during flowback period in tight oil reservoir

Fluid flow in a reservoir drained by a multiple fractured horizontal well

Coupled Thermal-Hydraulic-Mechanical Modeling of Near-Well Stress Evolution in Naturally Fractured Formations during Drilling

Numerical simulation of hydro-mechanically coupled mud loss in fractured reservoirs

Research on Fluid–Solid Coupling Mechanism around Openhole Wellbore under Transient Seepage Conditions

Numerical study of the mud loss in naturally fractured oil layers with two-phase flow model

Dynamic response mechanism of borehole breathing in fractured formations

Modeling fluctuating pressure in the eccentric annulus with a four-parameter rheological method

Critical Pressure of Closure Fracture Reopening and Propagation: Modeling and Applications

Particle migration behavior of fractured lost circulation control: Numerical simulation

A New Methodology to Evaluate the Sealing Process Based on Pressure Drop and Fluid Loss in Fractures during the Drilling Operation

Status and Prospect of Drilling Fluid Loss and Lost Circulation Control Technology in Fractured Formation

Novel Mathematical Model for Transient Pressure Analysis of Multifractured Horizontal Wells in Naturally Fractured Oil Reservoirs

Transient analysis of mud loss in fractured formations

A two-phase flow model coupled with geomechanics for simulating transient production behaviour in an unconventional reservoir by considering fracture geometry and capillary pressure

Estimation and Analysis of Carbon Dioxide Friction Loss in Wellbore During Liquid/Supercritical Carbon Dioxide Fracturing