Abstract:The present work considers a shell-and-coil heat exchanger, and the hybrid nanofluid's flow and heat transfer inside the proposed thermal system are numerically evaluated. The coil tube has a conical pattern and is oriented horizontally inside the shell. Three water-based hybrid nanofluids are considered here as heat transfer fluids. A commercial CFD code that uses the finite volume method performs the numerical analysis. The regime of fluid flow is turbulent in both coil and shell sections. The validation analysis of the present numerical model was performed using the experimental results of the reference, and accordingly, the accuracy of the present numerical model was proved. This work includes two sectors. In the first part, the volume concentration of the considered hybrid nanofluid was kept constant, and the influence of the hybrid nanofluid kind on the hydrothermal behaviour of the shell-conical-coil heat exchanger was evaluated numerically. In this section, three hybrid nanofluids, (i) Water/MgO–TiO 2 , (ii) Water/MOS 2 -CuO, and (iii) Water/Ag-HEG, were employed. Also, for all suggested hybrid nanofluids, the volume concentration of both employed nanoparticles are equal to each other, φ 1 = φ 2 . The obtained outcomes depicted that between various considered heat transfer fluids, the Water/MgO–TiO 2 model displayed the most outstanding thermal performance value in all the investigated Dean numbers, and the model Water/MOS 2 -CuO was in second place. Moreover, the maximum thermal performance for the hybrid nanofluid was obtained at φ 1 = φ 2 = 0.7. The Ag-HEG/Water and MgO–TiO 2 /Water hybrid nanofluids have the lowest and maximum thermal performance at the lowest considered Dean number among the evaluated hybrid nanofluids. As a result, the MgO–TiO 2 /Water hybrid nanofluid has roughly 18.95 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. Furthermore, the MgO–TiO 2 /Water and Ag-HEG/Water hybrid nanofluids have the highest and lowest thermal performance at the highest considered Dean number, respectively. Consequently, the MgO–TiO 2 /Water hybrid nanofluid exhibits approximately 39.22 % higher thermal performance than the Ag-HEG/Water hybrid nanofluid. The MgO–TiO 2 /Water hybrid nanofluid has the highest and lowest thermal performance at the lowest Dean number, with φ 1 = φ 2 = 0.7 and φ 1 = φ 2 = 0.3, respectively. The φ 1 = φ 2 = 0.7 model has a thermal performance that is approximately 39.28 % greater than the φ 1 = φ 2 = 0.3 model at the lowest regarded Dean number. At the highest regarded Dean number, the MgO–TiO 2 /Water hybrid nanofluid with φ 1 = φ 2 = 0.3 exhibits a lower thermal performance than the model φ 1 = φ 2 = 0.7 by about 14.28 %.

Efficient convective heat transfer enhancement in heat exchanger tubes with water based novel hybrid nanofluids: experimental investigation

Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids

Enhancing Heat Transfer Performance: Nanofluids Application in Helical Microfin Tube Concentric Heat Exchangers

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

Recent Achievements in Heat Transfer Enhancement with Hybrid Nanofluid in Heat Exchangers: A Comprehensive Review

Study on Enhanced Heat Transfer and Stability Characteristics of Al2O3–SiO2/Water Hybrid Nanofluids

Numerical investigation on the impact of different design arrangements of helical heat exchangers with varying cross-sections utilizing ternary hybrid nanofluids

Experimental investigation on the performance of hybrid Fe3O4 coated MWCNT/Water nanofluid as a coolant of a Plate heat exchanger

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Experimental investigation of the performance of the plate heat exchanger using (Multi-Walled Carbon Nanotubes–Al2O3/water) hybrid nanofluid

Thermo-hydraulic performance evaluation and comparison of SiC-MWCNT and Al2O3-MWCNT Non-Newtonian hybrid nanofluids using a heat exchanger equipped with helically corrugated tubes: an experimental study

Hydrothermal behaviour of hybrid nanofluid flow in a shell-and conical coil tube heat exchanger; numerical approach

Thermo-hydraulic performance of metal oxide nanofluid flow through the helical coil tube of a three-fluid heat exchanger: an experimental and optimization study

Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-and-Tube Heat Exchanger

Numerical investigation on assessing the influence of diverse-shaped hybrid nanofluids on thermal performance of triple tube heat exchanger

Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Numerical investigation of MHD mixed convection in an octagonal heat exchanger containing hybrid nanofluid

Hybrid nanofluids flow over a Riga plate surrounded by a variable porous medium for heat transfer optimization

Effect of using a ZnO-TiO2/water hybrid nanofluid on heat transfer performance and pressure drop in a flat tube with louvered finned heat exchanger

Experimental investigation of a novel heat exchanger for optimizing heat transfer performance using Al2O3-water nanofluids