Abstract:Fibre-reinforced high-performance fly ash foam concrete (FHFC) has broad engineering application prospects owing to its lightweight and high-strength, energy-saving, heat preservation and environmental protection characteristics. Its mechanical properties and constitutive models can serve as an important basis for engineering structural design, numerical analysis and structural reliability monitoring. Aimed at exploring the influence of different factors on the physical and mechanical properties of FHFC and its stress–strain constitutive relationship, the dry density, cube compressive strength, splitting tensile strength and axial compressive strength of 27 groups of FHFC with different mixture proportions were measured and analysed. The primary and secondary relationships of the water–binder ratio, sand–binder ratio and replacement rate of fly ash to cement on the physical and mechanical properties of FHFC were studied. The failure mechanism of FHFC under uniaxial compression was discussed and a two-stage phenomenological constitutive model of FHFC was established through theoretical derivation. The results show that sand–binder ratio and water–binder ratio are the main factors affecting the physical and mechanical properties of FHFC. The stress–strain curve shows the characteristics of stages, namely, the elastic–plastic stage, the stress upswing stage, the plastic plateau stage and the failure stage. The influence of each factor on the elastic–plastic stage of the stress–strain curve shows obvious regularity, but the influence on the plastic stage is complex, and the regularity is not significant. The established two-stage phenomenological constitutive model is in good agreement with the stress–strain curve obtained from the test, and it can more accurately predict the uniaxial compression response of FHFC. The model can be used for the theoretical calculation of the bearing capacity of high-strength foam concrete structural members and even serve as an important basis for the engineering application of high-strength foam concrete. The influences of various factors on the performance of fibre-reinforced high-performance fly ash foam concrete were investigated. The uniaxial compression failure mechanism and stress–strain curve of fibre-reinforced high-performance fly ash foam concrete in different test groups were analysed. A two-stage phenomenological constitutive model suitable for fibre-reinforced high-performance fly ash foam concrete was established.

Behavior of foam concrete flat panel and applications of foam concrete in construction works

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

Mechanical Properties of Sustainable Mesocarp Fibre Reinforced Lightweight Foamed Concrete

An Experimental Study on Fibre Reinforced Foam Concrete Using Hybrid Fiber

Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete

The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete

PAPER FIBER REINFORCED FOAM CONCRETE WALL PANELING SYSTEM

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Mechanical properties and constitutive model of fibre-reinforced high-performance class-F fly ash foam concrete

Basalt fiber-reinforced foam concrete containing silica fume: An experimental study

Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement

Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste

Experimental Study on Application Performance of Foamed Concrete Prepared Based on a New Composite Foaming Agent

INVESTIGATION OF THE EFFECTS OF DENSITY ON PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF FOAM CONCRETE

Mechanical, durability and thermal properties of foamed concrete reinforced with synthetic twisted bundle macro-fibers

Effect of Fly Ash on Bonding and Shrinking Behaviors of High-Belite Sulphoaluminate Cement–Based Foam Concrete

PERFORMANCES OF HIGH POROUS CELLULAR CONCRETE

Effect of Sand-to-Cement Ratio on Mechanical Properties of Foam Concrete