Abstract:The use of Fischer–Tropsch (F–T) diesel synthesised from coal in automobiles can alleviate petroleum shortages and promote clean utilisation of coal. Because F–T diesel does not contain oxygen, in this study, we added TiO2 nanoparticles and n-octanol to the F–T diesel to serve as oxygenated enhancers to increase the oxygen content and reduce the particulate matter emission of F–T diesel. To achieve better combustion characteristics and emission performance, TiO2 nanoparticles with different concentrations (20, 50, and 100 ppm) were dispersed to the fuel blends of F–T diesel and n-octanol to determine the optimum amount of TiO2 nanoparticles. The brake thermal efficiency (BTE), combustion stability, number concentration, and size distribution of the ultrafine particulate (UFP) emission of the three nano-emulsion fuels were investigated on a turbocharged heavy-duty diesel engine. The experimental results indicated that the BTE of the F–T diesel and that of the nano-emulsion fuel T50 increased by 0.75 % and 2.26 %, respectively, compared with petro-diesel. The nano-emulsion fuels had higher peak cylinder pressure and peak heat release rate owing to the faster combustion rate caused by the micro-explosion of fuel droplets and higher thermal conductivity caused by the high surface-to-volume ratio of TiO2 nanoparticles. Moreover, the nano-emulsion fuels exhibited higher cyclic variations of peak cylinder pressures and more dispersed corresponding crank angles with the increase in the concentration of TiO2 nanoparticles. Compared with petro-diesel, the soot emission of the F–T diesel was reduced by an average of 27.32 % at various loads, whereas that of the optimal T50 decreased by an average of 43.61 %. Additionally, the number concentration of UFPs of T50 was reduced by an average of 21.2 % compared to the F–T diesel. At low loads, the three nano-emulsion fuels exhibited greater geometric mean diameters (GMDs) of UFPs and lower ratios of nucleation mode particulates (NMPs) owing to the higher fuel viscosity in the pre-injection stage at a lower in-cylinder temperature. At medium and high loads, the nano-emulsion fuels exhibited smaller GMDs of UFPs and higher ratios of NMPs owing to micro-explosion and secondary atomisation at higher temperatures.

The effects of the usage of silicon dioxide (SiO2) and titanium dioxide (TiO2) as nano-sized fuel additives on the engine characteristics in diesel engines: a review

The Comprehensive Effects of Nano Additives on Biodiesel Engines—A Review

A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE)

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Nanoparticles as fuel additive for improving performance and reducing exhaust emissions of internal combustion engines

Impact of various metal-oxide based nanoparticles and biodiesel blends on the combustion, performance, emission, vibration and noise characteristics of a CI engine

Analyzing the effect of carbon nanoparticles on the combustion performance and emissions of a DI diesel engine fueled with the diesel-methanol blend

Influence of the addition of titanium oxide nanoparticles to Fischer-Tropsch diesel synthesised from coal on the combustion characteristics and particulate emission of a diesel engine

Experimental study of diesel engine performance and emissions from microalgae fuel blends with SiO2 nanoadditives: RSM and Taguchi optimization

The impacts of nano fuels containing Fe-Ni-TiO2/activated carbon nanoparticles on diesel engine performance and emission characteristics

Synergistic effects of hybrid nanoparticles along with conventional fuel on engine performance, combustion, and environmental characteristics

Investigation of engine performance, exhaust emissions, and combustion characteristics of a diesel engine fueled with Adansonia digitata methyl ester doped with nanosilica additive extracted from agricultural waste

Evaluation of TiO2 Nanoparticle-Enhanced Palm and Soybean Biodiesel Blends for Emission Mitigation and Improved Combustion Efficiency

Effect of Al2O3 Nanoparticles on Performance and Emission Characteristics of Diesel Engine Fuelled with Diesel–Neem Biodiesel Blends

Energy, exergy and sustainability analyses of nanoparticles added to fuels to reduce carbon footprint

Effect of different configurations of hybrid nano additives blended with biodiesel on CI engine performance and emissions

Investigating the impact of n-heptane (C7H16) and nanoparticles (TiO2) on diesel–microalgae biodiesel blend in CI diesel engines

Analysis the effects of adding Al2O3 and CeO2 nanoparticles to fuel on engine emission and vibration

Effect of nanoparticle-doped biofuel in a dual-fuel diesel engine with oxy-hydrogen gas

Effect of Alumina and Bio‐Based Calcium Oxide Nanoadditives on Reduction of Emissions and Performance Improvement in a Common Rail Direct Injection Diesel Engine Fueled with B20 Blend of Waste Cooking Oil Biodiesel

Comparison in the effects of alumina, ceria and silica nanoparticle additives on the combustion and emission characteristics of a modern methanol-diesel dual-fuel CI engine