Modular energy absorbing capabilities achieved with compounded deformation mechanisms in composite AA6061-T6/PVC foam structures

John Magliaro,Foad Rahimidehgolan,Pouya Mohammadkhani,William Altenhof,Ahmet T. Alpas

DOI: https://doi.org/10.1007/s00707-023-03607-1

IF: 2.645

2023-06-08

Acta Mechanica

Abstract:There is a significantly growing need for energy absorbing systems comprised of lightweight, low-cost and recyclable materials which can achieve high-capacity energy absorption with an ideal (near-constant) force response—these objectives are often only partially accomplished due to the many inherent engineering challenges. This study characterized a novel compounded energy dissipation system which could simultaneously exploit axial cutting, radial clamping, foam compression and extrusion/foam interactions or any desired combination of these mechanisms, for high-capacity energy absorption. Experiments were conducted for AA6061-T6 extrusions, with H-series PVC foam cores with relative densities between 0.09 and 0.18, subjected to 6-bladed cutting and 10-bladed cutting/clamping. The extrusion/foam interaction effects were newly observed, characterized by localized in-plane expansion of the foam cores and exhibited a transition from near-constant reaction forces to progressive quasi-linear increases. Introducing maximum density, H250 PVC foam consequently increased the average mean force and effectiveness (EAEF) by 33.8% with a marginal 12.3% CFE reduction. Numerical modeling was completed with a combined Lagrangian/Eulerian approach capable of predicting the experimental findings with an average validation metric of 0.92. An extended analytical modeling procedure was also developed with the ability to predict the entire force/displacement response with an average validation metric of 0.95. This modeling procedure was utilized in a parametric investigation which revealed a broad 10–200 kN steady-state load bearing capacity (86.0% average CFE) for the proposed, component-scale system since each deformation mechanism could theoretically be included or omitted as desired.

mechanics