Abstract:In developing countries, energy demand from biomass has increased due to exponential population growth. This has translated into voluminous quantities of wood being used. The situation is exacerbated by the popular use of inefficient stoves with low thermal insulation, hence contributing to deforestation. In this study, the performance of a cooking stove improved with sawdust as an insulation material was assessed. An insulated fire stove prototype of 26 cm saucepan diameter was designed, constructed, and cast with sawdust and clay in a ratio of 1 : 1 (as the first layer) and sawdust alone as the second layer. The developed stove was tested using a water boiling test to establish its operating performance. The thermal efficiency of the stove was assessed using indigenous wood fuels used in rural Uganda (Senna spectabilis, Pinus caribaea, and Eucalyptus grandis). Computational fluid dynamics was used to simulate the temperature and velocity fields within the combustion chamber and for generating temperature contours of the stove. Obtained results indicated that S. spectabilis had the highest thermal efficiency of 35.5 ± 2.5%, followed by E. grandis (25.7 ± 1.7%) and lastly P. caribaea (19.0 ± 1.2%) in the cold start phase when compared with traditional stoves. The stove remained cold as hot air was restricted to the combustion chamber with decreasing temperature contours toward the outer wall up to the ambient temperature. The velocity flow remained constant as the chamber was colored green throughout due to the shielding of the stove with sawdust as insulation. The heat flux generated indicated that a thick layer of 6 cm or more could ensure good insulation, and this could be further reduced by introducing more sawdust. The designed stove has the potential to reduce biomass consumption and emissions when compared to traditional cookstoves. The inclusion of a chimney draught in the fire stove prototype could reduce smoke and increase thermal efficiency. Further studies should focus on minimizing the thickness of the clay-sawdust (first) layer and increasing the thickness of the sawdust layer to reduce the weight of the fire stove.

Design and performance evaluation of low-emission injera baking biomass gasifier stove

Development and Performance Evaluation of Biomass-Based Injera Baking Gasifier Stove: A Case Study of Clean Cooking Technologies in Ethiopia

Experimental Study on Pyrolysis and Combustion Properties of Biomass Briquette.

Performance comparison of three prototype biomass stoves with traditional and Mirt stoves for baking Injera

Evaluation of biomass‐based cook stoves in Ethiopia: A transition strategy from conventional to modern cook stoves

Design and development of solar parabolic concentrator, closed-loop pressurized hot water for a household baking system - For the case of injera baking in Ethiopia

Development of Electrically Aerated Stove for Pyrolyzed Briquettes

A User-Centered, Iterative Engineering Approach for Advanced Biomass Cookstove Design and Development

A Numerical and Experimental Performance Assessments of an Improved Natural Draft Biomass Cook Stove

Improved Cook stoves to Meet Sustainable Development Goal in Ethiopia

Optimization of Operating Conditions of a Household Up-draft Biomass Gasification Stove

Improving Combustion Technology for Cooking Activities for Pollutant Emission Reduction and Carbon Neutrality

Optimization Study on Air Distribution of an Actual Agriculture Up-Draft Biomass Gasification Stove

Performance of Cooking Stoves with Biomass Pellet Fuel

Characterizing Dynamic Relationships Between Burning Rate and Pollutant Emission Rates in a Forced-Draft Gasifier Stove Consuming Biomass Pellet Fuels.

Performance Characteristics of a Cooking Stove Improved with Sawdust as an Insulation Material

Development and evaluation performance of top-lit updraft biomass micro-gasifiers for energy-intensive household cooking tasks in Mexico

Design of an injera baking system using parabolic trough solar collectors at Mekelle University cafeteria

Improving the Energy Efficiency of Stoves To Reduce Pollutant Emissions from Household Solid Fuel Combustion in China

Pollutant emissions and energy efficiency of Chinese gasifier cooking stoves and implications for future intervention studies.

MODELLING AND FLUID DYNAMIC ANALYSIS OF COMBUSTION PROCESS AND ENERGY EFFICIENCY OF A DIGITAL STOVE FOR DOMESTIC APPLICATION