Abstract:The continuous operation of coal mine underground reservoirs exposes the coal pillar dams to mining disturbances and prolonged water immersion, resulting in the deterioration of coal pillars' mechanical properties and posing a serious threat to the dam stability. To this end, coal samples from the proposed pillar dam in the 5–2 coal seam of Daliuta Mine in Shendong Mining Area were selected for conducting water absorption tests and triaxial compression tests under conditions of repeated water immersion, in order to study the deterioration of the mechanical properties and acoustic emission damage characteristic of coal samples as well as the mechanism behind the deterioration of coal samples under the water–rock interaction. The results indicated that: (1) the saturated water content of coal samples exhibited a progressive increase as the water immersion times increased, but with a diminishing rate of growth. (2) As the water immersion times increased, the compressive strength, cohesive force, and internal friction angle of coal samples gradually decreased. Notably, the deterioration effect was more pronounced in compressive strength and cohesive force, while the decline in internal friction angle was relatively minor, and the total deterioration degree and the stage deterioration degree of the above three had evident cumulativity and non-uniformity. The progressive rise in water immersion times led to a gradual attenuation of the deterioration effect. Meanwhile, the confining pressure exhibited a certain inhibitory impact on the strength deterioration of coal samples. (3) Compared to the dry coal samples, the average AE count rate of coal samples subjected to a single water immersion exhibited a significant decrease, and subsequent water immersion for two, three, and four times resulted in a very minor decrease in the average AE count rate. (4) The AE cumulative ringing counts in coal samples exhibited varying degrees of reduction as water immersion times increased. Specifically, the most significant decrease in AE cumulative ringing counts occurred after the initial water immersion, followed by a gradual decrease thereafter. The energy-releasing capacity of coal samples decreased, while their plasticity exhibited a gradual increase. (5) A damage model was developed for coal samples based on the water immersion times. The model indicated that the damage to coal samples increased as the water immersion times increased, and the damage rate gradually decreased and eventually stabilized. (6) The deterioration mechanism of coals under the water–rock interaction was explained. Through repeated water immersion, the physical, chemical, and mechanical interactions between water and coal induced alterations in the internal microstructure of coal samples, resulting in the deterioration of mechanical properties such as compressive strength, cohesive force, and internal friction angle, which was a cumulative damage process from the microscopic to the macroscopic level.

Failure analysis of residual coal pillar under the coupling of mining stress and water immersion in the goaf underground water reservoir

Failure analysis of coal pillars and overburden from underground water reservoir under the mining-water invasion coupling effect

Similar experimental study on retaining waterproof coal pillar in composite strata mining

Water Infusion on the Stability of Coal Specimen under Different Static Stress Conditions

Characteristics of waterproof failure and optimal width of narrow coal pillars under the coupled effects of mining, excavation and seepage

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Similarity simulation study on displacement and stress changes response to coal mining in Longdong coal mine, China

The Effect of Hydraulic Coupling on Mechanical Deformation Characteristics of Shallow Coal Seam in Western Mining Area

Simulation Experimental Investigations into the Mechanical Response and Failure Mechanisms of Coal–Rock Combinations

Mechanisms of failure in coal samples from underground water reservoir

Study on the strength deterioration characteristic and damage model of coal pillar dams with repeated water immersion in underground reservoirs

Mechanism and Control of Water–Rock Coupling-Induced Disaster when Mining below the Unconsolidated Confined Aquifer

Dynamic behaviour and failure mechanism of coal subjected to coupled water-static-dynamic loads

Research on the required width of a fault waterproof coal pillar based on underground pressure control theory

Physical modeling of floor failure above confined water: a case study in China

Failure Mechanism and Movement Characteristics of Overlying Strata in Longwall Mining Face with Thick Aquifer

Investigation on rational width of coal pillar and roadway support in isolated panel of extra-thick coal seam

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Physical simulation experiment on prevention and control of water inrush disaster by backfilling mining under aquifer

Physical simulation study on grouting water plugging of flexible isolation layer in coal seam mining

Rationality Analysis of Preserved Waterproof Pillar in Mining Area