Mechanism and Control of Water–Rock Coupling-Induced Disaster when Mining below the Unconsolidated Confined Aquifer

Zhihua Li,Ke Yang,Xinzhu Hua,Cheng Liu,Peng Zhou,Shengwen Ge
DOI: https://doi.org/10.1155/2023/6485987
IF: 2.006
2023-01-25
Geofluids
Abstract:Theoretical analysis and numerical simulation were conducted to study the disaster-causing mechanism of structural instability of the overlying strata induced by water–rock coupling and effectively prevent and control the powered support jammed accident during mining below the unconsolidated confined aquifer. The influencing factors on the stability of the overlying strata structure were analyzed, and the numerical simulation method of unconsolidated confined aquifer was designed. The disaster-causing mechanism and the evolution process of the stress–displacement–crack field of the overlying strata induced by water–rock coupling were discovered. Meanwhile, the prevention measures for the structural instability of the overlying strata were proposed and verified in some engineering practice. Results show that the stability of the overlying strata structure reduces with the increase in hydraulic pressure, the breaking interval of the main roof, and the decrease in the overlying strata strength and waterproof coal pillar height. The overlying strata structure keeps a stable equilibrium state before the fracture planes through a whole waterproof coal–rock pillar. When the hydraulic pressure is small or the bedrock surface is a thick topsoil layer, the sliding block is in a state of limit equilibrium for the decrease of pressure on the sliding block while the fracture planes through a whole waterproof coal–rock pillar because of the action of unloading during an overlying strata movement. When the hydraulic pressure is high, the pressure on the sliding block remains constant at about hydraulic pressure, and the intact shear fall of the sliding block occurs as a result of the hydraulic pressure of the confined aquifer and the weight of the sliding block, which may result in a powered support jammed accident. However, this type of accident can be prevented by drainage for decreasing hydraulic pressure, presplitting blasting of the hard main roof, overlying strata grouting reinforcement, and increasing the height of the waterproof coal–rock pillar.
geochemistry & geophysics,geology
What problem does this paper attempt to address?
This paper attempts to solve the problems of roof structure instability caused by water - rock coupling and the resulting hydraulic support jamming accidents in the eastern, northern and northeastern regions of China when there is an unconsolidated confined aquifer below the coal seam. Specifically, the research aims to reveal the failure mechanism of the roof structure below the unconsolidated confined aquifer during the mining process under the action of water - rock coupling, and propose effective prevention and control measures. ### Research Background In coal mines in the eastern, northern and northeastern regions of China, an unconsolidated confined aquifer with a thickness of about 200 - 600 meters covers the coal seam. According to the research, an 80 - meter - thick water - proof coal pillar is usually reserved in the early stage, which has led to a coal loss of more than 1 billion tons. For example, in the Xieqiao mining area of Panji in Huainan, Anhui, the coal seam and the bedrock strata are covered by a Cenozoic loose layer with a thickness of 120 - 484 meters, and the lower gravel aquifer is in direct contact with the coal seam, forming a mining environment under high - water - head conditions. ### Problem Description When mining is carried out below the unconsolidated confined aquifer, a series of problems may be triggered: 1. **Roof Structure Instability**: Due to the water - rock coupling, the roof structure may be damaged, resulting in overall movement. 2. **Hydraulic Support Jamming Accidents**: The instability of the roof structure may lead to the jamming of hydraulic supports, causing serious economic losses. 3. **Influence of the Height of the Water - proof Coal Pillar**: Reducing the height of the water - proof coal pillar can increase the coal recovery rate, but it also increases the risk of roof instability. ### Research Objectives Through theoretical analysis and numerical simulation, the paper studies the following problems: 1. **Influence of Water - Rock Coupling on the Stability of Roof Structure**: Analyzes the factors affecting the stability of the roof structure, including water pressure, main roof fracture interval, roof strength and the height of the water - proof coal pillar, etc. 2. **Disaster Occurrence Mechanism**: Reveals the stress - displacement - fracture field evolution process of the roof structure under the action of water - rock coupling and the mechanism of disasters caused thereby. 3. **Prevention and Control Measures**: Proposes measures to prevent roof structure instability and hydraulic support jamming accidents, and has been verified in actual projects. ### Main Conclusions The research shows that the stability of the roof structure decreases with the increase of water pressure, the increase of the main roof fracture interval, and the decrease of roof strength and the height of the water - proof coal pillar. Specifically: - When the water pressure is low or the bedrock surface is a thick top - layer soil layer, the sliding block is in a limit equilibrium state. - When the water pressure is high, the pressure borne by the sliding block is maintained at the water pressure level, and finally, complete shear collapse occurs due to the water pressure of the confined aquifer and the weight of the sliding block, which may lead to hydraulic support jamming accidents. ### Preventive Measures To prevent such accidents, the following measures can be taken: 1. **Drainage and Pressure Reduction**: Reduce water pressure through drainage. 2. **Pre - splitting Blasting of Hard Roof**: Shorten the fracture interval of the main roof through pre - splitting blasting. 3. **Grouting Reinforcement of Roof**: Reinforce the roof by grouting. 4. **Increase the Height of the Water - proof Coal Pillar**: Increase the height of the water - proof coal pillar through redesign. These measures can improve the stability of the roof structure to a certain extent and reduce the occurrence of hydraulic support jamming accidents.