Abstract:Background: Owing to its portability, affordability, and energy-efficiency, LED-based photoacoustic (PA) imaging is increasingly becoming popular when compared to its laser-based alternative, mainly for superficial vascular imaging applications. However, this technique suffers from low SNR and thereby limited imaging depth. As a result, visual image quality of LED-based PA imaging is not optimal, especially in sub-surface vascular imaging applications. Purpose: Combination of linear ultrasound (US) probes and LED arrays are the most common implementation in LED-based PA imaging, which is currently being explored for different clinical imaging applications. Traditional delay-and-sum (DAS) is the most common beamforming algorithm in linear array-based PA detection. Side-lobes and reconstruction-related artifacts make the DAS performance unsatisfactory and poor for a clinical-implementation. In this work, we explored a new weighting-based image processing technique for LED-based PAs to yield improved image quality when compared to the traditional methods. Methods: We are proposing a lag-coherence factor (LCF), which is fundamentally based on the combination of the spatial auto-correlation of the detected PA signals. In LCF, the numerator contains lag-delay-multiply-and-sum (DMAS) beamformer instead of a conventional DAS beamformer. A spatial auto-correlation operation is performed between the detected US array signals before using DMAS beamformer. We evaluated the new method on both tissue-mimicking phantom (2D) and human volunteer imaging (3D) data acquired using a commercial LED-based PA imaging system. Results: Our novel correlation-based weighting technique showed LED-based PA image quality improvement when it is combined with conventional DAS beamformer. Both phantom and human volunteer imaging results gave a direct confirmation that by introducing LCF, image quality was improved and this method could reduce side-lobes and artifacts when compared to the DAS and coherence-factor (CF) approaches. Signal-to-noise ratio, generalized contrast-to-noise ratio, contrast ratio and spatial resolution were evaluated and compared with conventional beamformers to assess the reconstruction performance in a quantitative way. Results show that our approach offered image quality enhancement with an average signal-to-noise ratio and spatial resolution improvement of around 20% and 25% respectively, when compared with conventional CF based DAS algorithm. Conclusions: Our results demonstrate that the proposed LCF based algorithm performs better than the conventional DAS and CF algorithms by improving signal-to-noise ratio and spatial resolution. Therefore, our new weighting technique could be a promising tool to improve the performance of LED-based PA imaging and thus accelerate its clinical translation.

U‐Net enhanced real‐time LED‐based photoacoustic imaging

Improving needle visibility in LED-based photoacoustic imaging using deep learning with semi-synthetic datasets

Reconstructing the Photoacoustic Image with High Quality using the Deep Neural Network Model

Y-Net: Hybrid deep learning image reconstruction for photoacoustic tomography in vivo

Y-Net: A Hybrid Deep Learning Reconstruction Framework for Photoacoustic Imaging in vivo

Imaging Enhancement for Acoustic-Resolution Photoacoustic Microscopy by Deep Learning

Light Emitting Diodes based Photoacoustic Imaging and Potential Clinical Applications

Efficient Photoacoustic Image Synthesis with Deep Learning

Deep-Learning-Based Algorithm for the Removal of Electromagnetic Interference Noise in Photoacoustic Endoscopic Image Processing

Deep-Learning Image Reconstruction for Real-Time Photoacoustic System

Improved Photoacoustic Imaging of Numerical Bone Model Based on Attention Block U-Net Deep Learning Network

Noise‐insensitive defocused signal and resolution enhancement for optical‐resolution photoacoustic microscopy via deep learning

Simultaneous Denoising and Localization Network for Photoacoustic Target Localization

Moving beyond simulation: data-driven quantitative photoacoustic imaging using tissue-mimicking phantoms

Abstract 4164: Hybrid photoacoustic imaging and fast ultrasound localization microscopy to probe the tumor microenvironment

Photoacoustic Imaging of Human Vasculature Using LED versus Laser Illumination: A Comparison Study on Tissue Phantoms and In Vivo Humans

Photoacoustic Spectral Response using Ultrasound and Interferometric Sensors: A Correlation Study for a High Bandwidth Real-Time Blood Vasculature Monitoring Application in a Chick-Embryo Chorioallantoic Membrane (CAM) Model

AS-Net: Fast Photoacoustic Reconstruction With Multi-Feature Fusion From Sparse Data

Improvement of LED-based photoacoustic imaging using lag-coherence factor (LCF) beamforming

UPAMNet: A unified network with deep knowledge priors for photoacoustic microscopy

Multikernel positional embedding convolutional neural network for photoacoustic reconstruction with sparse data