Abstract:In the conducted study, two building integrated photovoltaic thermal (BIPV/T) systems were installed on the south facade of a container in Şanlıurfa, with one system consisting of bifacial panels and the other system consisting of monofacial panels, both having the same power capacities. To enhance the efficiency of BIPV/T systems, various parameter studies were conducted by comparing bifacial and monofacial panels. These parameter studies have been validated through PVsyst and CFD analyses. Considering that nearly 39% of the total CO2 emission released into the atmosphere today are thought to be due to the energy consumed by buildings, the importance of taking measures through buildings to combat global warming is evident. Therefore, the concept of nearly zero‐energy buildings (NZEB) is come to the forefront. Building integrated photovoltaic thermal (BIPV/T) systems are used to enable buildings to generate their own energy. However, buildings have limited facade and roof areas required for BIPV/T systems. Therefore, in this study, various configurations of bifacial (double‐sided) and monofacial (single‐sided) panels were compared to investigate ways to enhance the efficiency of BIPV/T systems. Different air flow velocities and varying air gap distances were tested for both panel types. By placing a reflective surface on the wall behind the bifacial panel, the electrical efficiency of the bifacial panel was increased and proven through PVsyst analysis. Both panels provided maximum heat efficiency at the shortest air gap distance under high air flow conditions. In addition, it was shown in both the experimental setup and Comsol CFD analysis that it provides significant benefit in the thermal energy load of the building when heating the interior environment in winter. In terms of electrical power production surplus, the bifacial panel outperformed the monofacial panel in all configurations, with a minimum advantage of 8.33% and a maximum of 12.73%. Additionally, the maximum electrical efficiency was obtained from the bifacial panel in configurations with the longest air gap distance. Using the bifacial panel in the BIPV/T system with the shortest air gap distance during the heating season and the longest air gap distance during other seasons can provide the highest efficiency for the building throughout the year.

The effect of CIS BIPV as a shading device on building life cycle energy performance

The Effect of Shading Devices with Integrated Photovoltaics on Energy Efficiency of Buildings

Energy performance of an innovative bifacial photovoltaic sunshade (BiPVS) under hot summer and warm winter climate

Energy-Saving Potential Comparison of Different Photovoltaic Integrated Shading Devices (PVSDs) for Single-Story and Multi-Story Buildings

The effect of building integration on the temperature and performance of photovoltaic modules

Experimental investigation of BIPV/T application in winter season under Şanlıurfa's meteorological conditions

Understanding BIPV performance with respect to WWR for energy efficient buildings

Effect of Semi-Transparent A-Si Pv Glazing within Double-Skin Façades on Visual and Energy Performances Under the UK Climate Condition

Performance Assessment of a Building Integrated Photovoltaic Thermal System in Mediterranean Climate—A Numerical Simulation Approach

Performance assessment of partially shaded building-integrated photovoltaic (BIPV) systems in a positive-energy solar energy laboratory building: Architecture perspectives

Coupled evaluation of the optical-thermal-electrical performance of customized building-integrated photovoltaic components

A comprehensive energy, exergy, economic, and environmental impact assessment of building-integrated photovoltaic systems

A Study of Pv-Shading Combined with Building

Optimizing energy efficiency in mediterranean single-family homes: A parametric study of building typology, orientation, and BIPV integration

Theoretical-experimental-simulation research on thermal-daylight-electrical performance of PV glazing in high-rise office building in the Greater Bay Area

Energy and Daylighting Performance of Kinetic Building-Integrated Photovoltaics (BIPV) Façade

Outdoor Performance Analysis of Semitransparent Photovoltaic Windows with Bifacial Cells and Integrated Blinds

Lighting Performance in Office Buildings with Bipv Facades: Visual and Non-Visual Effects

Building PV integration according to regional climate conditions: BIPV regional adaptability extending Köppen-Geiger climate classification against urban and climate-related temperature increases

Economic and life cycle cost analysis of building-integrated photovoltaic system for composite climatic conditions

Energy and Thermal Performance Analysis of PCM-Incorporated Glazing Units Combined with Passive and Active Techniques: A Review Study