Abstract:This study verifies the effects of deployment parameters on the safe separation of Autonomous Underwater Vehicles (AUVs) and mission payloads. The initial separation phase is meticulously modeled based on computational fluid dynamics (CFD) simulations employing the cubic constitutive Shear Stress Transport (SST) k-ω turbulence model and overset grid technologies. This phase is characterized by a 6-degree-of-freedom (6-DOF) framework incorporating Dynamic Fluid-Body Interaction (DFBI), supported by empirical validation. The SST k-ω turbulence model demonstrates superior performance in managing flows characterized by adverse pressure gradients and separation. DFBI entails computationally modeling fluid–solid interactions during motion or deformation. The utilization of overset grids presents several advantages, including enhanced computational efficiency by concentrating computational resources solely on regions of interest, simplified handling of intricate geometries and moving bodies, and adaptability in adjusting grids to accommodate changing simulation conditions. This research analyzes mission payloads' trajectories and attitude adjustments after release from AUVs under various cruising speeds and initial release dynamics, such as descent and angular velocities. Additionally, this study evaluates the effects of varying ocean currents at different depths on separation safety. Results indicate that the interaction between AUVs and mission payloads during separation increases under higher navigational speeds, reducing the separation speed and degrading the stability. As the initial drop velocities increase, fast transition through the AUV's immediate flow field promotes separation. The core of this process is the initial pitch angle management upon deployment. Optimizing initial pitching angular velocity prolongs the time for mission payloads to reach their maximum pitch angle, thus decreasing horizontal displacement and improving separation safety. Deploying AUVs at greater depths alleviates the influence of ocean currents, thereby reducing disturbances during payload separation.

Systematic assessment of SpaceLiner passenger cabin emergency separation using multi-body simulations

Study on Conceptual Design of Light-weight Fuselage Structures in Novel Manned Spacecraft

Computational Studies of Aircraft Life-Support Systems

Experimental and numerical investigation on the unsteady interaction in longitudinal stage separation for parallel-staged two-body configuration

Evaluating personnel evacuation risks under fire scenario of Airbus wide-body aircraft: A simulation study

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Mission design for point-to-point passenger transport with reusable launch vehicles

Simulation methodology for aircraft escape system

Residual Strength Prediction and Structural Response of a Multi-Chamber Cabin to a Fire

Analysis Study on Separation of Aerospace Vehicle and Ground Simulation Test

Advances in Space Launch System Booster Separation Computational Fluid Dynamics

Unsteady interaction and dynamic stability analysis of a two-stage-to-orbit vehicle during transverse stage separation

Design and Experimental Validation of a Disturbing Force Application Unit for Simulating Spacecraft Separation

Dynamic Model of the Separation of Large-Sized Elastic Structures

Structural Analysis of a Composite Passenger Seat for the Case of an Aircraft Emergency Landing

Optimizing and designing upper-stage separation spring of lifting-body rocket

Aerodynamic Characteristics of Ejection Seat and Occupant

Analysis of Parameter Sensitivity on Dynamics of Satellite Separation

Safety Analysis of Initial Separation Phase for AUV Deployment of Mission Payloads

Dynamic Analysis of Satellite Separation Considering the Flexibility of Interface Rings

Application of Finite Element Dynamic Simulation to Airplane Cabin in Air Turbulence