Abstract:the passive safety of aircraft passengers is such an important aspect in the design of aircraft structures as strength and fatigue concerns. The development of methods and devices to prevent passenger injuries is the subject of continuous efforts. The mission is to minimize stresses and accelerations on passengers during a crash. Over the years, studies on crash phenomena have been focused on experimental tests, using full-scale structures and Anthropomorphic Test Devices (ATDs) to assess the consequences of impact phenomena on the human body. However, due to the high costs of experimental campaigns and the difficulty of controlling all relevant parameters, the need of efficient numerical models capable of validating experimental data has increased. This is specifically relevant for tests on ATDs. In the frame of this work, the side-impact of an aircraft passenger have been numerically investigated positioned on a window-side seat of an aluminium commercial aircraft fuselage a World SID-based dummy. An attempt to increase the aircraft crashworthiness was made placing in correspondence with the head and the shoulders of the dummy hybrid sandwich shock absorbers. In order to validate the considered dummy model, a lateral impact against a flat barrier has been carried out. The obtained numerical results have been cross-compared with literature experimental data. Then, the side-impact behaviour of the dummy within a fuselage section has been investigated, with the aim to verify the absorption capability of the shock absorbers and to quantify their effect on the safety of the dummy. The employment of the shock absorbers allowed to reduce the acceleration peaks experienced by the dummy's head up to 50%.

Aerodynamic Characteristics of Ejection Seat and Occupant

Computational Studies of Aircraft Life-Support Systems

Aerothermodynamic Shape Optimization of a Hypersonic Lifting Body

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Computational Simulation of Reentry Flows over Hypersonic Vehicles Using Nonlinear Coupled Constitutive Relations

Studies of limb-dislodging forces acting on an ejection seat occupant

Structural Analysis of a Composite Passenger Seat for the Case of an Aircraft Emergency Landing

Crashworthiness Design Optimization for an Evtol Aircraft.

Biomechanical investigation of thoracolumbar spine in different postures during ejection using a combined finite element and multi-body approach

Study of the automotive aerodynamic performance affected by entrance structure of forecabin

Simulation methodology for aircraft escape system

Developing a simplified finite element model of a car seat with occupant for predicting vibration transmissibility in the vertical direction

Research on Head-Neck Injuries of Pilots During Emergency Ejection from the Aircraft

Computer Simulations of Contact Forces for Airbags with Different Folding Patterns During Deployment Phase

On the use of hybrid shock absorbers to increase safety of commercial aircraft passengers during a crash event

Investigation of occupant kinematics and injury risk in a reclined and rearward-facing seat under various frontal crash velocities

Aerothermodynamic Analysis of Faceted Aeroshell at Hypersonic Speed

Numerical Investigation of Geometry Parameters for Design of High Performance Ejectors

FORCE AND MOVEMENT FOR UPPER LIMB IN AIRCRAFT ESCAPE EJECTION

Simulation Study of Effect of Seat Design Parameters on Occupant Neck Injury Potential in Low-Speed Rear Impact

Numerical simulation and performance prediction of the ejection impact of air springs