A possible channel effect of the organics adsorbed to the electrode surface on interfacial electron transfer in the alkaline Pb electrodeposition process

Xin-Jie Liu,Guang-Shi Tang,Jun-Qing Pan,Chun-Ze Ma,Kang-Ni Wan

DOI: https://doi.org/10.1039/d1nj01124c

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:A possible electron transfer channel in solid–liquid interface.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Real-Time Characterization Of The Fine Structure And Dynamics Of An Electrical Double Layer At Electrode-Electrolyte Interfaces

Yanyan Zhang,Jilin Tang,Zhigang Ni,Yao Zhao,Feifei Jia,Qun Luo,Lanqun Mao,Zihua Zhu,Fuyi Wang

DOI: https://doi.org/10.1021/acs.jpclett.1c01134

2021-01-01

Abstract:The chemisorption of an electrolyte species on electrode surfaces is ubiquitous and affects the dynamics and mechanism of various electrochemical reactions. Understanding of the chemical structure and property of the resulting electrical double layer is vital but limited. Herein, we operando probed the electrochemical interface between a gold electrode surface and a common electrolyte, phosphate buffer, using our newly developed in situ liquid secondary ion mass spectrometry. We surprisingly found that, on the positively charged gold electrode surface, sodium cations were anchored in the Stern layer in a partially dehydrated form by a formation of compact ion pairs with the accumulated phosphate anions. The resulting strong adsorption phase was further revealed to retard the electro-oxidation reaction of ascorbate. This finding addressed one major gap in the fundamental science of electrode-electrolyte interfaces, namely, where and how cations reside in the double layer to impose effects on electrochemical reactions, providing insights into the engineering of better electrochemical systems.
THE EFFECT OF TETRAALKYLAMMONIUM ADDITIVE ON ELECTROREDUCTION OF OXALIC ACID

Ling Jin,Xinsheng Zhang,Dongfang Niu,Weikang Yuan

DOI: https://doi.org/10.3969/j.issn.1003-9384.2013.05.013

2013-01-01

Abstract:The effect of tetraalkylammonium cations adsorption on the electroreduction of oxahc acid was studied with pure lead electrode and it was explained by the φ1 potential effect and spatial block effect based on the Stern-Grahame model theory. The results indicated that the motivation of tetraal-kylammonium additive on electroreduction of oxalic acid was increasing with the increase of the concentration and adding of alkyl carbon atoms. The performance of above effects was related to adsorption amount of electrode surface additive. When the adsorption amount was relatively small, the φ1 effect became stronger, and the reaction rate increased with increasing adsorption amount. While the adsorption amount was large, the inhibitory effect became stronger, and the reaction rate decreased with increasing adsorption amount.
Effects of Fatty Alcohol Polyoxyethylene Ether AEO on PbO2Structure and Electrodeposition Behavior

Wen Yan,Zhen Chen,Qiang Yu,Wei Zhu,Hong Wang,Bingqian Du

DOI: https://doi.org/10.1149/2.0731608jes

IF: 3.9

2016-01-01

Journal of The Electrochemical Society

Abstract:In this work, the Ti/PbO2 anode materials were prepared from nitrate solutions in the presence of fatty alcohol polyoxyethylene ether AEO to study the effects of AEO on PbO2 deposition. The phase composition and microstructure of electrode material were characterized by XRD and SEM. The PbO2 electrodeposition mechanism and electrocrystallization behavior were investigated by cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA) and Scharifker-Hills (SH) mechanism. The results indicate that: The material is composed by beta-PbO2 in this case and the growth orientation of the crystal face is changed by AEO; The growth model of PbO2 crystals is in good agreement with Generalized Electrochemical Aggregative Growth Mechanism; The AEO can improve the morphology of PbO2 plating, and makes the surface smoother without flaws; The PbO2 electrodeposition is diffusion-irreversible-controlled process in the presence of AEO; The deposition on substrate is promoted, nevertheless, the further deposition on PbO2 coating is restrained by AEO; The D-0 at each of step potentials, which relates to diffusion coefficient, was improved by AEO revealed variation of solution nature; The electrocrystallization of PbO2 follows Scharifker-Hills(SH) progressive nucleation/growth mechanism with the oxygen evolution occurring simultaneously, and the AEO increased the number density of active sites but reduced the nucleation rate. (C) The Author(s) 2016. Published by ECS.
Proton donor/acceptor effects on electrochemical proton-coupled electron transfer reactions at solid-liquid interfaces

Feng Zhu,Wenbin Zhang,Jiao Xun,Bi-Jun Geng,Qing-Man Liang,Yang Yang

DOI: https://doi.org/10.1016/j.coelec.2023.101377

IF: 8.5

2023-08-01

Current Opinion in Electrochemistry

Abstract:Proton-coupled electron transfer (PCET) plays a crucial role in several electrochemical reactions at the solid–liquid interface, and proton donor/acceptor should be the important component participating in these electrode processes, since species and proton transfer pathway of proton donor/acceptor are of great significance in tuning PCET electrode reactions. Herein, a review on effects of proton donor/acceptor on several typical electrocatalytical reactions is given, mainly focusing on species of proton donor/acceptor, including concentration, pK a and steric hindrance, specifically, proton transfer pathway arising from strategy of ligand design of molecular catalyst and modification of electrode-electrolyte interface is presented.

chemistry, physical,electrochemistry,materials science, multidisciplinary
Operando surface science methodology reveals surface effect in charge storage electrodes

Chao Wang,Yanxiao Ning,Haibo Huang,Shiwen Li,Chuanhai Xiao,Qi Chen,Li Peng,Shuainan Guo,Yifan Li,Conghui Liu,Zhong-Shuai Wu,Xianfeng Li,Liwei Chen,Chao Gao,Chuan Wu,Qiang Fu

DOI: https://doi.org/10.1093/nsr/nwaa289

IF: 20.6

2020-12-08

National Science Review

Abstract:Abstract Surface and interface play critical roles in energy storage devices, calling for operando characterization techniques to probe the electrified surfaces/interfaces. In this work, surface science methodology, including electron spectroscopy and scanning probe microscopy, has been successfully applied to visualize electrochemical processes at operating electrode surfaces in an Al/graphite model battery. Intercalation of anions together with cations is directly observed in the surface region of a graphite electrode with tens of nanometers thickness, the concentration of which is one order higher than that in bulk. An intercalation pseudocapacitance mechanism and a double specific capacity in the electrode surface region are expected based on the super-dense intercalants and anion/cation co-intercalation, which are in sharp contrast to the battery-like mechanism in the electrode bulk. The distinct electrochemical mechanism at the electrode surface is verified by performance tests of real battery devices, showing that a surface-dominant, nanometer-thick graphite cathode outperforms a bulk-dominant, micrometer-thick graphite cathode. Our findings highlight the important surface effect of working electrodes in charge storage systems.

multidisciplinary sciences
Physical adsorption of OH- causes anomalous charging at oxide-water interfaces.

Xiancai Lu,Jun Cheng,J. Lützenkirchen,Yingchun Zhang,Yong-Bin Zhuang,Xiandong Liu

DOI: https://doi.org/10.1039/d4cc01833h

IF: 4.9

2024-08-07

Chemical Communications

Abstract:This study reveals a charging mechanism at oxide-water interfaces, solving the puzzle that challenges the traditional electrical double layer (EDL) model. We found that the experimentally measured zeta potential is caused by physically adsorbed OH-, instead of acidic dissociation of surface OHs and the first-layer water. This mechanism should apply for a wide range of material interfaces and could find applications in future.

Chemistry,Medicine,Materials Science
Gently does it!: in situ preparation of alkali metal-solid electrolyte interfaces for photoelectron spectroscopy

Joshua S Gibson,Sudarshan Narayanan,Jack E N Swallow,Pardeep Kumar-Thakur,Mauro Pasta,Tien-Lin Lee,Robert S Weatherup

DOI: https://doi.org/10.1039/d1fd00118c

2022-08-25

Abstract:The key charge transfer processes in electrochemical energy storage devices occur at electrode-electrolyte interfaces, which are typically buried, making it challenging to access their interfacial chemistry. In the case of Li-ion batteries, metallic Li electrodes hold promise for increasing energy and power densities and, when used in conjunction with solid electrolytes, the adverse safety implications associated with dendrite formation in organic liquid electrolytes can potentially be overcome. To better understand the stability of solid electrolytes when in contact with alkali metals and the reactions that occur, here we consider the deposition of thin (∼10 nm) alkali metal films onto solid electrolyte surfaces, where the metal is thin enough that X-ray photoelectron spectroscopy can probe the buried electrode-electrolyte interface. We highlight the importance of in situ alkali metal deposition by assessing the contaminant species that are present after glovebox handling and the use of 'inert' transfer devices. Consequently, we compare and contrast three available methods for in situ alkali-metal deposition; Li sputter deposition, Li evaporation, and Li plating induced by e- flood-gun irradiation. Studies on both a sulphide solid electrolyte (Li6PS5Cl), and a single-layer graphene probe surface reveal that the more energetic Li deposition methods, such as sputtering, can induce surface damage and interfacial mixing that are not seen with thermal evaporation. This indicates that the appropriate selection of the Li deposition method for in situ studies is required to observe representative behaviour, and the results of previous studies involving energetic deposition may warrant further evaluation.
Decoupling "Cling-Cover-Capture" Triple Effects on Stable Zn Anode/Electrolyte Interface

Quan Zong,Yifei Yu,Chaofeng Liu,Qilong Zhang,Guoying Wei,Jiangying Wang,Jingji Zhang,Guozhong Cao

DOI: https://doi.org/10.1021/acsnano.4c07803

IF: 17.1

2024-09-25

ACS Nano

Abstract:The electrochemical performance of the Zn anode in a water-based electrolyte is influenced by the Zn anode/electrolyte interface. In the present work, a distinctive interfacial chemistry is enabled by introducing synergistic "cling-cover-capture" effects of different components in aspartame (APM) molecule, which can be described in detail as clinging to the surface of Zn anode by incompletely coordinated nitrogen and oxygen atoms in the main chain, covering the surface by the benzene rings and...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Electrochemical behaviors of co-deposited Pb/Pb–MnO 2 composite anode in sulfuric acid solution – Tafel and EIS investigations

yanqing lai,yuan li,liangxing jiang,wang xu,xiaojun lv,jie li,yexiang liu

DOI: https://doi.org/10.1016/j.jelechem.2012.02.011

IF: 4.598

2012-01-01

Journal of Electroanalytical Chemistry

Abstract:The oxygen evolution kinetics and anodic layer properties of Pb/Pb-MnO2 composite anode during the 72 h galvanostatic electrolysis in H2SO4 solution were investigated with Quasi-stationary polarization (Tafel) and Electrochemical Impedance Spectroscopy (EIS) techniques. The results revealed that the anodic activity and reaction kinetics varied a lot during the electrolysis for it is a process indicating the formation and stabilization of anodic layer. At the very beginning of electrolysis, the composite anode exhibited very high oxygen evolution activity since the reaction was controlled by the transformation step of intermediates. Then, its oxygen evolution activity was largely diminished and the rate determination step (rds) became the formation and adsorption of first intermediate, S-OHads. In the prolonged electrolysis, the anodic potential gradually decreased and the final stable value was comparable to industrial Pb-Ag (1.0%) anode. On the stable anodic layer after 72 h, the oxygen evolution reaction (OER) was still controlled by the formation and adsorption of intermediate, and the adsorption resistance took a dominant part in the whole impedance. Besides, compared with Pb-Ag and Pb anode, although OER at the stable state were all controlled by the intermediate adsorption process, the adsorption resistance of Pb/Pb-MnO2 anode was much smaller than the other two due to the existence of MnO2 particles and large amount of beta-PbO2 in the stable anodic layer. (C) 2012 Elsevier B.V. All rights reserved.
Alkali metal storage mechanism in organic semiconductor of perylene-3,4,9,10-tetracarboxylicdianhydride

Xu Lian,Zhirui Ma,Zhonghan Zhang,Jinlin Yang,Yuan Liu,Chengding Gu,Rui Guo,Yanan Wang,Xin Ye,Shuo Sun,Yue Zheng,Honghe Ding,Jun Hu,Xu Cao,Hongying Mao,Junfa Zhu,Shuzhou Li,Wei Chen

DOI: https://doi.org/10.1016/j.apsusc.2020.146396

IF: 6.7

2020-09-01

Applied Surface Science

Abstract:<p>Organic semiconductor-based electrode materials are promising candidates for energy storage devices due to their high capacity, excellent flexibility, low cost and resource sustainability. The alkali metal storage mechanisms on various active functional groups of the organic materials, however, are still not clear at the molecular scale. It is essential to conduct systematic mechanism studies for the alkali storage behaviors in organic electrode materials. Here, the chemical and electronic structure evolutions upon the deposition of lithium (Li) and sodium (Na) on a model organic semiconductor electrode material of perylene-3,4,9,10-tetracarboxylicdianhydride (PTCDA), have been investigated by <em>in-situ</em> x-ray photoemission spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), near edge x-ray absorption fine structure (NEXAFS) spectroscopy and density functional theory (DFT) calculations. It reveals that Li/Na can react with the carbonyl oxygen and increase the electron density within the PTCDA perylene. Moreover, the band-bending like features are observed on PTCDA film upon Li/Na interaction. Our experimental results and theoretical calculations indicate that reactions on carbonyl groups and charge redistribution are crucial for the Li/Na storage process, which shed light on comprehensive insights for the Li/Na storage behaviors on organic semiconductor-based electrode materials.</p>

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
The electrostatic effect and its role in promoting electrocatalytic reactions by specifically adsorbed anions.

Wei Chen,Lu-Lu Zhang,Zhen Wei,Meng-Ke Zhang,Jun Cai,Yan-Xia Chen

DOI: https://doi.org/10.1039/d2cp04547h

2023-01-01

Abstract:The adsorption of anions and its impact on electrocatalytic reactions are fundamental topics in electrocatalysis. Previous studies revealed that adsorbed anions display an overall poisoning effect in most cases. However, for a few reactions such as the hydrogen evolution reaction (HER), oxidation of small organic molecules (SOMs), and reduction of CO and O, some specifically adsorbed anions can promote their reaction kinetics under certain conditions. The promotion effect is frequently attributed to the adsorbate induced modification of the nature of the active sites, the change of the adsorption configuration and free energy of the key reactive intermediate which consequently change the activation energy, the pre-exponential factor of the rate determining step . In this paper, we will give a mini review of the indispensable role of the classical double layer effect in enhancing the kinetics of electrocatalytic reactions by anion adsorption. The ubiquitous electrostatic interactions change both the potential distribution and the concentration distribution of ionic species across the electric double layer (EDL), which alters the electrochemical driving force and effective concentration of the reactants. The contribution to the overall kinetics is highlighted by taking HER, oxidation of SOMs, reduction of CO and O, as examples.
Insight into the Interface Design for Li Metal Anode: Organic‐Rich or Inorganic‐Rich

Yijia Wang,Hongyu Hou,Karnpiwat Tantratian,Lyudmila V. Goncharova,Bolin Fu,Enzhong Jin,Parham Pirayesh,Hamid Abdolvand,Xin Pang,Lei Chen,Changhong Cao,Yang Zhao

DOI: https://doi.org/10.1002/adfm.202406426

IF: 19

2024-06-18

Advanced Functional Materials

Abstract:Through adjusting the organic–inorganic ratio inside the hybrid interfaces, the mechanical toughness, lithiophilicity, and diffusion kinetics of the hybrid interfaces can be precisely tuned, which thereby influences the nucleation, early growth behavior, and final bulk deposition morphology of Li. Microcracks and surface heterogeneity in solid‐electrolyte interphase (SEI) induced by repeated plating/stripping of lithium (Li) metal exacerbate SEI fracture propagation and dendrite growth, which lead to unsatisfactory Coulombic efficiency and limited cycle life of Li metal anode. In this study, the hybrid artificial interfaces with controlled organic–inorganic ratios are designed and deep insight into their impacts on the electro‐chemo‐mechanical properties is obtained. The organic–inorganic ratios in the hybrid interfaces influence the mechanical properties, lithiophilicity, and diffusion kinetics of the interfaces, which in turn affect the nucleation, early growth, and repeated deposition/dissolution behavior of Li. It is found that increasing the inorganic ratio in the hybrid interface can realize significantly enhanced electrochemical performances. This work answers a key question for hybrid interfaces: should organic‐rich or inorganic‐rich be preferred in the hybrid interface? It is believed that this work will guide the future design of hybrid interfaces for Li metal anode and open up opportunities for the realization of next‐generation Li metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Communication-An Organic Solvent System-Assisted Electrodeposition of Highly Active Pt for the Oxygen Reduction Reaction

Shuiyun Shen,Fan Li,Lutian Zhao,Cehuang Fu,Guanghua Wei,Lijun Yang,Junliang Zhang

DOI: https://doi.org/10.1149/2.0531815jes

IF: 3.9

2018-01-01

Journal of The Electrochemical Society

Abstract:This paper presents herein some new findings on highly active Pt electrocatalysts of oxygen reduction reaction electrodeposited from a novel organic solvent system. Influences of supporting electrolytes and potentiostatic potentials on the deposition behavior were investigated in detail. It's well believed that this study provides an inspiring insight for future electrodeposition in organic systems. (c) The Author(s) 2018. Published by ECS.
Impedance spectroscopic study on interfacial ion transfers in cyanide-bridged coordination polymer electrode with organic electrolyte

yoshifumi mizuno,masashi okubo,daisuke asakura,tatsuya saito,eiji hosono,yoshiyasu saito,katsuyoshi ohishi,tetsuichi kudo,haoshen zhou

DOI: https://doi.org/10.1016/j.electacta.2011.12.068

IF: 6.6

2012-01-01

Electrochimica Acta

Abstract:Interfacial charge transfer is a fundamental issue in both science and technology of the batteries. In this report, interfacial alkali-ion transfer between the cyanide-bridged coordination polymer (Prussian blue analogue, PBA) electrode and organic electrolytes was investigated. Electrochemical impedance spectroscopy (EIS) suggested that alkali-ion transfer at the K0.1Mn[Fe(CN)6]0.7·3.6H2O (MnFe-PBA) electrode–electrolyte interface involves two processes. One process could be interpreted as the ion transfer between the Outer Helmholtz Plane (OHP) and Inner Helmholtz Plane (IHP) including the solvation/desolvation process, the other could be interpreted as that between the IHP and electrode, including ad-ion diffusion on the electrode surface. Temperature dependence of the charge transfer resistances gave the activation energy for each process. The activation energy for Li-ion transfer between the OHP and IHP in propylene carbonate (PC) electrolyte is almost constant at the composition range of 0.1<x<0.6 in LixMnFe-PBA, which is comparable to that in ethylene carbonate (EC)-diethyl carbonate (DEC) electrolyte. In contrast, the activation energy for Li-ion transfer between the IHP and electrode depends largely on the Li-ion concentration in the PBA electrode. However, the averaged value for Li-ion transfer is higher than that for Na-ion transfer. This result indicated that Li-ion on the PBA surface diffuses with higher potential barrier than Na-ion. Furthermore, the effect of the interfacial charge transfer resistance was evaluated by the high charge/discharge rate experiments.
Electrodeposition Mechanism of Nickel in Addic Electroplating Bath Containing Organic Additives

LI Jun-hua,KUANG Dai-zhi,FENG Yong-lan,FEI Xi-ming,ZENG Rong-ying

DOI: https://doi.org/10.16577/j.cnki.42-1215/tb.2010.08.019

2010-01-01

Abstract:The effects of commonly used or-ganic additives saccharin,1 ,4-butynediol and the mixture of both on electrodeposition of nickel in acidic plating bath were investi-gated by means of cyclic voltammetry,alternate current imped-ance spectroscopy and potential step test.Results show that or-ganic additives cause negative shifts of deposition potential of nickel,and the electrode process is irreversible.Electron-trans-fer and adsorption of intermediate products were involved in the electrodeposition of nickel.The cathodic overpotential of nickel electrodeposition was increased by about 650 mV when the two kinds of organic additives were introduced at the same time,and the number of nucleation sites also increased,benefiting to gener-ating bright nickel coating.Besides,I2/I2m-t/tm curves of nickel electrodeposition in the presence of the organic additives were close to the theoretical instantaneous nucleation curve,which in-dicated that nickel deposition in the presence of the organic addi-tives followed the electrocrystallization mechanism of instantane-ous nucleation and three-dimensional growth.
Direct Contacting with Liquid Electrolyte Facilitates the Surface Phase Transition in Ni-rich Layered Cathode

Lianfeng Zou,Wengao Zhao,Haiping Jia,Jianming Zheng,Linze Li,Daniel Abraham,Guoying Chen,Jason Croy,Ji-Guang Zhang,Chongmin Wang

DOI: https://doi.org/10.1017/s1431927620023557

IF: 4.0991

2020-01-01

Microscopy and Microanalysis

Abstract:An abstract is not available for this content so a preview has been provided. As you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Nanochannel electrodes facilitating interfacial transport for PEM water electrolysis

Jason K. Lee,Finn Babbe,Guanzhi Wang,Andrew W. Tricker,Rangachary Mukundan,Adam Z. Weber,Xiong Peng

DOI: https://doi.org/10.1016/j.joule.2024.06.005

IF: 46.048

2024-08-23

Joule

Abstract:Addressing the convoluted interfacial transport phenomenon on the anode of proton-exchange membrane water electrolyzers remains a considerable challenge, which hinders further efficiency and durability improvement for the technology. Correspondingly, we couple electrochemical diagnostic techniques with characterization tools to unravel the potential proton hopping mechanism and imbalance of oxygen transport at the transport layer, catalyst layer, and membrane interfaces. The results guide us to design electrodes with nanochannels, which improve interfacial transport and achieve outstanding electrolysis performance and durability.

materials science, multidisciplinary,chemistry, physical,energy & fuels
The Study of the Surface State of the Lead Cathode in the Electrolytic Reduction of Oxalic Acid

ZHU Zhu,ZHANG Xin-sheng

2009-01-01

Abstract:To study the problem of electrode deactivation a double potential-step chronocoulometric method is applied in the study of adsorption on electrode surface in the progress of oxalic acid electrolysis.It is known that the product glyoxylic acid(R) adsorbed on the fresh electrode surface.While with the galvanostatic electrolysis the reactant oxalic acid(O) adsorbing gradually on the electrode surface is proved.The direct adsorption of reactant goes against the charge transfer,which lead to the passivation of the electrode surface and the decline of the current efficiency.Adding the additive tetrapropylammoniumhydroxide(TPAH) into the catholyte the fresh electrode surface is adsorbed by O.And the current efficiency with the TPAH is larger than that without the TPAH.With the galvanostatic electrolysis the potential become more and more negative,which result in the additive deadsorbing.It is confirmed that the surface is presented that both O and R are adsorbable,and the current efficiency is decreased correspondingly.
Examining Concentration-Reliant Zn Deposition/Stripping Behavior in Organic Alcohol/Sulfones-Modified Aqueous Electrolytes

Weiman Zhuang,Qianwen Chen,Zhen Hou,Zongzhao Sun,Tianxu Zhang,Jianyong Wan,Limin Huang

DOI: https://doi.org/10.1002/smll.202300274

IF: 13.3

2023-01-01

Small

Abstract:The practical application of Zn metal anodes in electronic devices is hindered by dendrite growth and parasitic reactions. Electrolyte optimization, particularly the introduction of organic co-solvents, is widely used to circumvent these challenges. Various organic solvents in a wide range of concentrations have been reported; however, their influences and corresponding working mechanisms at different concentrations are largely unexplored in the same organic species. Herein, economical, low-flammable ethylene glycol (EG) is used as a model co-solvent in aqueous electrolytes to examine the relationship between its concentration, anode-stabilizing effect, and mechanism. Two maximal values are observed for the lifetime of Zn/Zn symmetric batteries under EG concentrations from 0.05 vol% to 48 vol%. Zn metal anodes can stably run for over 1700 h at a low EG content (0.25 vol%) and high EG content (40 vol%). Based on the complementary experimental and theoretical calculations, the enhancements in low- and high-content EG are ascribed to the specific surface adsorption for suppressed dendrite growth and the regulated solvation structure for inhibited side reactions, respectively. Intriguingly, a similar concentration-reliant bimodal phenomenon is observed in other low-flammable organic solvents (e.g., glycerol and dimethyl sulfoxide), thereby suggesting universality of this study and providing insight into electrolyte optimization.
Electrochemical study and application of Pb2+ transfer across the liquid/liquid interface

Kai Chen,Shaoai Xie,Jinping Jia

2006-01-01

Acta Chimica Sinica

Abstract:Pb2+ has a sensitive complex peak in the water/acetylacetone- dithizone system. The voltammetric behavior of Pb(II) facilitated by dithizone (DzH2) across the water/acetylacetone interface was investigated by cyclic voltammetry. The process was controlled by diffusion and irreversible. Pb2+ transferred from water to acetylacetone to form Pb(DzH) 2 with dithizone. Pb2+ spike potential appeared at -0.3 V and the linear scope was 5 × 10-6-0.1 mol•L-1. The reliable and sensitive method can be developed for the on-line and in situ determination of Pb2+ in industrial waste water.

A possible channel effect of the organics adsorbed to the electrode surface on interfacial electron transfer in the alkaline Pb electrodeposition process

Real-Time Characterization Of The Fine Structure And Dynamics Of An Electrical Double Layer At Electrode-Electrolyte Interfaces

THE EFFECT OF TETRAALKYLAMMONIUM ADDITIVE ON ELECTROREDUCTION OF OXALIC ACID

Effects of Fatty Alcohol Polyoxyethylene Ether AEO on PbO2Structure and Electrodeposition Behavior

Proton donor/acceptor effects on electrochemical proton-coupled electron transfer reactions at solid-liquid interfaces

Operando surface science methodology reveals surface effect in charge storage electrodes

Physical adsorption of OH- causes anomalous charging at oxide-water interfaces.

Gently does it!: in situ preparation of alkali metal-solid electrolyte interfaces for photoelectron spectroscopy

Decoupling "Cling-Cover-Capture" Triple Effects on Stable Zn Anode/Electrolyte Interface

Electrochemical behaviors of co-deposited Pb/Pb–MnO 2 composite anode in sulfuric acid solution – Tafel and EIS investigations

Alkali metal storage mechanism in organic semiconductor of perylene-3,4,9,10-tetracarboxylicdianhydride

The electrostatic effect and its role in promoting electrocatalytic reactions by specifically adsorbed anions.

Insight into the Interface Design for Li Metal Anode: Organic‐Rich or Inorganic‐Rich

Communication-An Organic Solvent System-Assisted Electrodeposition of Highly Active Pt for the Oxygen Reduction Reaction

Impedance spectroscopic study on interfacial ion transfers in cyanide-bridged coordination polymer electrode with organic electrolyte

Electrodeposition Mechanism of Nickel in Addic Electroplating Bath Containing Organic Additives

Direct Contacting with Liquid Electrolyte Facilitates the Surface Phase Transition in Ni-rich Layered Cathode

Nanochannel electrodes facilitating interfacial transport for PEM water electrolysis

The Study of the Surface State of the Lead Cathode in the Electrolytic Reduction of Oxalic Acid

Examining Concentration-Reliant Zn Deposition/Stripping Behavior in Organic Alcohol/Sulfones-Modified Aqueous Electrolytes

Electrochemical study and application of Pb2+ transfer across the liquid/liquid interface