Abstract:Highlights Ultrathin and defect-free graphene ink is prepared through a high-throughput fluid dynamics process, resulting in a high exfoliation yield (53.5%) and a high concentration (47.5 mg mL −1 ). A screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10 4 S m −1 and good mechanical flexibility. An electrochemical sodium ion sensor based on graphene ink exhibits an excellent potentiometric sensing performance in a mechanically bent state. Real-time monitoring of sodium ion concentration in sweat is demonstrated. Abstract Conductive inks based on graphene materials have received significant attention for the fabrication of a wide range of printed and flexible devices. However, the application of graphene fillers is limited by their restricted mass production and the low concentration of their suspensions. In this study, a highly concentrated and conductive ink based on defect-free graphene was developed by a scalable fluid dynamics process. A high shear exfoliation and mixing process enabled the production of graphene at a high concentration of 47.5 mg mL −1 for graphene ink. The screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10 4 S m −1 and maintains high conductivity under mechanical bending, compressing, and fatigue tests. Based on the as-prepared graphene ink, a printed electrochemical sodium ion (Na + ) sensor that shows high potentiometric sensing performance was fabricated. Further, by integrating a wireless electronic module, a prototype Na + -sensing watch is demonstrated for the real-time monitoring of the sodium ion concentration in human sweat during the indoor exercise of a volunteer. The scalable and efficient procedure for the preparation of graphene ink presented in this work is very promising for the low-cost, reproducible, and large-scale printing of flexible and wearable electronic devices.

Heteroatom-doped graphene oxide-based conductive ink: synthesis, characterization and investigation of conductivity properties for flexible sensor technology

Wearable Gas/strain Sensors Based on Reduced Graphene Oxide/linen Fabrics

Investigation of flexible electrochemical sensor properties of graphite conductive ink modified textile products and their applications in electrical circuits

Multifunctional and Ultrasensitive-Reduced Graphene Oxide and Pen Ink/Polyvinyl Alcohol-Decorated Modal/Spandex Fabric for High-Performance Wearable Sensors.

Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors

High-conductivity graphene/carbon black inks via interpenetrating networks for wearable fabric-based heaters and strain sensors

Water-Based Graphene Inks for All-Printed Temperature and Deformation Sensors

Bioresponsive, Electroactive, and Inkjet‐Printable Graphene‐Based Inks

Highly Concentrated, Conductive, Defect-free Graphene Ink for Screen-Printed Sensor Application

Inkjet printing of Pd/SO3H-modified graphene on different polymeric substrates to construct flexible electrochemical sensors

Stencil printing of a highly conductive graphene ink toward flexible electrochemical biosensors for glucose monitoring

Water-based highly conductive graphene inks for fully printed humidity sensors

Tailoring Water-Based Graphite Conductive Ink Formulation for Enzyme Stencil-Printing: Experimental Design to Enhance Wearable Biosensor Performance

Graphene-Based Flexible and Eco-Friendly Wearable Electronics and Humidity Sensors

Low-Cost Flexible Graphene Oxide Humidity Sensor Fabricated Using Inkjet Printing and Aerosol Deposition

Innovative Eco-Friendly Conductive Ink Based on Carbonized Lignin for the Production of Flexible and Stretchable Bio-Sensors

Direct Ink Writing Method of Fractal Wearable Flexible Sensor Based on Conductive Graphene/Polydimethylsiloxane Ink

Polylactic acid-Graphene Emulsion Ink based Conductive Cotton Fabrics

Recent Development of Graphene-Based Ink and Other Conductive Material-Based Inks for Flexible Electronics