Abstract:Highlights Ultrathin and defect-free graphene ink is prepared through a high-throughput fluid dynamics process, resulting in a high exfoliation yield (53.5%) and a high concentration (47.5 mg mL −1 ). A screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10 4 S m −1 and good mechanical flexibility. An electrochemical sodium ion sensor based on graphene ink exhibits an excellent potentiometric sensing performance in a mechanically bent state. Real-time monitoring of sodium ion concentration in sweat is demonstrated. Abstract Conductive inks based on graphene materials have received significant attention for the fabrication of a wide range of printed and flexible devices. However, the application of graphene fillers is limited by their restricted mass production and the low concentration of their suspensions. In this study, a highly concentrated and conductive ink based on defect-free graphene was developed by a scalable fluid dynamics process. A high shear exfoliation and mixing process enabled the production of graphene at a high concentration of 47.5 mg mL −1 for graphene ink. The screen-printed graphene conductor exhibits a high electrical conductivity of 1.49 × 10 4 S m −1 and maintains high conductivity under mechanical bending, compressing, and fatigue tests. Based on the as-prepared graphene ink, a printed electrochemical sodium ion (Na + ) sensor that shows high potentiometric sensing performance was fabricated. Further, by integrating a wireless electronic module, a prototype Na + -sensing watch is demonstrated for the real-time monitoring of the sodium ion concentration in human sweat during the indoor exercise of a volunteer. The scalable and efficient procedure for the preparation of graphene ink presented in this work is very promising for the low-cost, reproducible, and large-scale printing of flexible and wearable electronic devices.

Stencil printing of a highly conductive graphene ink toward flexible electrochemical biosensors for glucose monitoring

A precise flexible printed biosensor based on graphene ink decorated with N-doped graphene quantum dots

Bioresponsive, Electroactive, and Inkjet‐Printable Graphene‐Based Inks

Inkjet printing of Pd/SO3H-modified graphene on different polymeric substrates to construct flexible electrochemical sensors

Tailoring Water-Based Graphite Conductive Ink Formulation for Enzyme Stencil-Printing: Experimental Design to Enhance Wearable Biosensor Performance

Flexible electrochemical sensor printed with conductive ink made with craft glue and graphite to detect drug and neurotransmitter

An Ultrathin Flexible Affinity-Based Graphene Field-Effect Transistor For Glucose Monitoring

Fabrication of conductive Ag/AgCl/Ag nanorods ink on Laser-induced graphene electrodes on flexible substrates for non-enzymatic glucose detection

Highly Sensitive and Flexible Copper Oxide/Graphene Non‐Enzymatic Glucose Sensor by Laser Direct Writing

A Flexible and Highly Sensitive Nonenzymatic Glucose Sensor Based on DVD-laser Scribed Graphene Substrate.

Co3O4 Nanoparticles Embedded in Laser-Induced Graphene for a Flexible and Highly Sensitive Enzyme-Free Glucose Biosensor

Fabrication of Cu/graphene Layer Via Laser Direct Writing for Flexible Non-Enzymatic Glucose Electrode

Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors

Highly Concentrated, Conductive, Defect-free Graphene Ink for Screen-Printed Sensor Application

Flexible molecularly imprinted glucose sensor based on graphene sponge and Prussian blue

Heteroatom-doped graphene oxide-based conductive ink: synthesis, characterization and investigation of conductivity properties for flexible sensor technology

Inkjet printing high performance flexible electrodes via a graphene decorated Ag ink

Aerosol-Jet-Printed Graphene Immunosensor for Label-Free Cytokine Monitoring in Serum

Printed organo-functionalized graphene for biosensing applications

Water‐Based Conductive Ink Formulations for Enzyme‐Based Wearable Biosensors