Abstract:The clay shock method is used to fill the excavation gap caused by shield taper and deviation during shield tunnelling. The rheological properties and diffusion-related performance of clay shock (CS) slurry have an important influence on its ability. In this study, the authors tested the rheological properties of CS slurry by using a rotational viscometer with a stepless regulation in speed. The influence of the parameters of preparation of CS slurry on its rheological properties was analyzed. The results showed that the Bingham plastic model is more suitable for characterizing the shear thinning behaviors of CS slurry. The apparent viscosity and yield stress of the CS slurry first increased and then decreased with increasing duration and speed of stirring. They increased with the duration of standing and decreased with increasing the water–powder ratio of component A. The numerical diffusion simulations and model tests with constant pressure were carried out to investigate the influence of the water–powder ratio of component A, the permeability of the stratum, and the net injection pressure on its diffusion-related performance. The process of diffusion of CS slurry mainly involved filling and permeability diffusion. The filling diffusion stage mainly occurred in the first 30 s of injection and can reach 70–80 % of the final injection mass. The effect degree of the aforementioned factors on the diffusion distance of CS slurry was in the following order: permeability coefficient of stratum > water-powder ratio of component A > net injection pressure. CS slurry diffused over a distance of less than 10 cm in sandy soil, where this was negatively correlated with the viscosity of the slurry and positively correlated with the coefficient of permeability and porosity of the stratum. The filling time of the excavation gap was positively correlated with the viscosity of the slurry, negatively correlated with the net injection pressure, and was not significantly correlated with the coefficient of permeability of the stratum. The diffusion termination time was negatively correlated with the viscosity of the slurry, and positively correlated with the coefficient of permeability of the stratum and the net injection pressure.

Investigation into the pregelatinized starch additive alleviated the deterioration in rheological properties of slurries induced by high-temperature environment and seawater intrusion during submarine slurry shield tunneling

Research on rheology performance and sealing effect of alkali-activated GGBS paste used for tunnel leakage plugging

Effects of Pretreated Phosphogypsum and Granulated Blast-Furnace Slag on the Rheological Properties of the Paste Excited by NaOH

Rheological properties of seawater-mixed seashell powder calcined slag cement slurries: Effect of polycarboxylate superplasticizer and temperature

Experimental investigation on rheological properties and diffusion-related performance of clay shock slurry for excavation gap filling during shield tunnelling

Effect of seawater on solidification/stabilisation treatment of marine soft soil slurry by lime-activated ISSA and GGBS

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Hydraulic conductivity of the polymer-modified bentonite -sand-phosphogypsum (PMB-S-PG) mixture under drying–wetting and freezing–thawing cycles

New insight into the additives in preparation and reduction of shield slurry

The Mechanism of Viscosity-Enhancing Admixture in Backfill Slurry and the Evolution of Its Rheological Properties

Study on Synergistic Effect of Xanthan Gum and Sodium Methylsiliconate on Mechanical Strength and Water Stability of Phosphogypsum Road-Based Materials

Biodegradable Preformed Particle Gel (PPG) Made of Natural Chitosan Material for Water Shut-Off Application

Experimental Study on Performance of Modified Cement-Based Building Materials under High-Water-Pressure Surrounding Rock Environment

Influences of pretreatment methods on the mechanical and environmental behaviors of PG-GGBS-LM ternary stabilizer

Research and Experimental Application of New Slurry Proportioning for Slag Improvement of EPB Shield Crossing Sand and Gravel Layer

IMPROVING THE STABILITY OF BENTONITE SLURRY USING GELLAN GUM FOR AN EMERGENT HYDRAULIC BARRIER

Orthogonal Design and Microstructure Mechanism Analysis of Novel Bentonite Polymer Slurry in Pipe Jacking

Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast-furnace slag and steel slag

In-situ remediation of phosphogypsum in a cement-free pathway: Utilization of ground granulated blast furnace slag and NaOH pretreatment

Utilization of untreated-phosphogypsum as filling and binding material in preparing grouting materials

Slurry Preparation Effects on the Cemented Phosphogypsum Backfill through an Orthogonal Experiment