Abstract:This study partially replaced the clay with sewer sludge (SS) and rice husk (RH-SS) to make fired bricks. The brick samples were examed in terms of shrinkage, water absorption, and compressive strength. Besides, they were analyzed via XRD and metal extraction to determine the heavy metal residuals in the products. The results showed that it was possible to fabricate fired bricks using sewer sludge or rice husk-blended sludge with up to 30% by weight. These brick samples complied with the technical standard for clay brick production, in which the compressive strength was more than 7.5 MPa, water absorption was from 11–16%, and the linear shrinkage was all less than 5%. The rice husk addition helped mitigate the heavy metal residuals in the bricks and leaching liquid, in which all the values were lower than the US-EPA maximum concentration of contaminants for toxicity characteristics. Implications : Previous studies have proved the possibility of mixing sewage sludge from different origins (sewage sludge, river sediment, canal sediment, sewer sediment, etc.) with clay and some wastes to make bricks. In which, mostof the studies used sewage sludge from wastewater treatment plants, very fewdealt with lake/river or sewer sediment. This study shall be the first to study the possibility of employing sewer sediments with the addition of rice husk powder to achieve two targets, including (1) the reuse of biowaste and sludge for brick fabrication and (2) the reduction of heavy metals in final calcined bricks. Different ratios of the rice-husk blended sewer sludge (RH-SS) – clay mixture shall be tested to find the optimized compositions. The results showed that it was possible to fabricate fired bricks using sewer sludge or rice husk-blended sludge with up to 30% by weight, which meant reduce 30% of clay in the brick production. The final products were proved to meet the quality standard in terms of compressive strength (more than 10 MPa), water absorption(from 11–16%), and the linear shrinkage (less than 5%). Larger scale of this study can be an evident to recommend for policy change in the waste reuse in construction field.

Wastewater reclamation for the production of construction bricks: technical, economic, and environmental feasibility

Utilization of industrial wastes in non-sintered bricks: microstructure and environmental impacts

Incorporating Wastewater Sludge as a Cement Alternative in Repair Mortar: An Experimental Study of Material Properties

MANUFACTURING OF CLAY BRICKS BY USING Water Treatment Plant SLUDGE

Recycling of Waste River Sludge into Unfired Green Bricks Stabilized by a Combination of Phosphogypsum, Slag, and Cement

Utilizing Wheel Washing Machine Sludge as a Cement Substitute in Repair Mortar: An Experimental Investigation into Material Characteristics

Potential Use of Water Treatment Sludge as Partial Replacement for Clay in Eco-Friendly Fired Clay Bricks

Feasibility Analysis For Utilization Of Sewage Sludge Incineration Ash As Cement Replacement

Rheological, mechanical and durability properties of mortar containing brick waste as a partial replacement of sand

Eco-efficient reuse of alum-based water treatment sludge into structural sintering bricks

Utilization of Recycled Brick Powder as Supplementary Cementitious Materials—A Comprehensive Review

Eco-friendly concrete: Combining treated wastewater and recycled aggregates

Study on preparation of brick blocks by using construction waste and sludge

Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Utilization of Waste Brick Powder as a Partial Replacement of Portland Cement in Mortars

Potential pathway for reusing paper mill sludge ash as a supplementary material in alkali-activated bricks

Effective sludge management: Reuse of biowaste and sewer sediments for fired bricks

Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks

Effect of biowaste and construction waste additives on mechanical dewaterability of lake sediment for brick production

Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study