Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Performance-based assessment of bridges with steel-SMA reinforced piers in a life-cycle context by numerical approach

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Seismic Performance Assessment of a Multispan Continuous Isolated Highway Bridge with Superelastic Shape Memory Alloy Reinforced Piers and Restraining Devices

Probabilistic seismic risk assessment of concrete bridge piers reinforced with different types of shape memory alloys

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Seismic resilience of RC bridge with self-centering energy dissipation braces using SMA U-shaped plates

Shape memory alloy-reinforced UHPC tube confined bridge piers for enhancing the seismic resistance of highway bridges

Feasibility of using superelastic shape memory alloy in plastic hinge regions of steel bridge columns for seismic applications

Maintenance Strategy of Performance-Based Concrete Bridges in Life Cycle

Utilizing a new self-centering hysteresis model to assess the seismic vulnerability of a long-span cable-stayed bridge equipped with SMA wire-based roller bearings

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Computational studies on the seismic response of the State Route 99 bridge in Seattle with SMA/ECC plastic hinges

Experimental-analytical investigation of accelerated bridge construction concrete columns with self-centering Fe-SMA bars subjected to near-fault ground motions

Seismic performance of bridges with novel SMA cable‐restrained high damping rubber bearings against near‐fault ground motions

Study on Damage Emergency Repair Performance of A Simple Beam Embedded with Shape Memory Alloys

Performance-based seismic resilience and sustainability assessment of coastal RC bridges in aggressive marine environments

Feasibility Study of Using Engineered Cementitious Composite and High-Strength Bars in Rigid Bridge Piers Based on Seismic Vulnerability Analysis

Seismic Response of Resilient Bridges with SMA-Based Rocking ECC-Reinforced Piers