Abstract:Novel Ti/PbO2-Cr-PEDOT electrodes were prepared by electrodeposition for electrochemical degradation of phenolic wastewater. The electrodes were characterized by XRD, SEM-EDS, XPS, and FT-IR to study the crystalline, surface morphology, elements distribution, and microstructure of the electrodes. A flat and compact interface was obtained with Cr and PEDOT doping into beta-PbO2 plate by electrodeposition method. The linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) were conducted to explore the electrochemical performance of the prepared electrodes. The Ti/PbO2-Cr-PEDOT electrode exhibited a higher oxygen evolution potential (OEP, 2.53 V vs SCE) and a lower charge transfer resistance compared with Ti/PbO2. Phenol degradation efficiency of 100% and TOC removal rate of 95.02% were achieved in the electrochemical degradation of phenol within 120 min. The optimal process parameters (phenol concentration = 1000 mg.L-1, electrolyte concentration = 4.0 g.L-1, current density = 15 mA.cm(-2) and electrode distance = 3 cm) in the process of electrochemical oxidation of phenol wastewater were explored. Active species trapping experiments proved that center dot OH radicals played an important role in the electrochemical system. Furthermore, the electrode also showed high activity for the degradation of other phenolic wastewaters such as phloroglucinol (eta(DEP) = 100%), bisphenol A (eta(DEP) = 97.17%) and p-chlorophenol (eta(DEP) = 89.77%) within 60 min. A possible degradation pathway was proposed based on the intermediate products determined by HPCL. The Ti/PbO2-Cr-PEDOT electrode showed excellent stability with only 3% loss of degradation efficiency (eta(DEP )= 96.95%) after recycling tests for 5 times. These results suggest that Ti/PbO2-Cr-PEDOT is a promising electrode for electrochemical degradation of phenolic wastewaters.

Three-dimensional electrochemical degradation of p-aminophenol with efficient honeycomb block AC@Ti-Cu-Ni-Zn-Sb-Mn particle electrodes

Highly Efficient Manganese (III) Oxide Submerged Catalytic Ceramic Membrane for Nonradical Degradation of Emerging Organic Compounds

In-situ route for the graphitized carbon/TiO<sub>2</sub> composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

Stability and reactivity improved bimetallic 2D metal organic frameworks for electrocatalytic degradation of p -acetaminophenol

Design and properties of Sn–Mn–Ce supported activated carbon composite as particle electrode for three-dimensionally electrochemical degradation of phenol

Electrochemical activation of peroxymonosulfate by 3D printed blue TiO2 nanotube arrays reactive electrochemical membrane for efficient degradation of acetaminophen

Treatment of phenolic compound wastewater using CuFe<sub>2</sub>O<sub>4</sub>/Al<sub>2</sub>O<sub>3</sub> particle electrodes in a three-dimensional electrochemical oxidation system

Preparation of a Three-Dimensional Porous PbO2-CNTs Composite Electrode and Study of the Degradation Behavior of P-Nitrophenol

Development of a novel graphitic carbon nitride and multiwall carbon nanotube co-doped Ti/PbO2 anode for electrocatalytic degradation of acetaminophen

One-step synthesis of novel Fe/Fe3O4 embedded in N-doped graphite-like carbon nanosheets with the entangled CNTs to activate peroxymonosulfate for bisphenol A degradation

Integration of Ag3PO4/WO3 photoanode with bifunctional CuO cathode exhibiting photocatalytic and peroxidase-mimetic properties for nanozyme-coupled photoelectrocatalytic degradation of persistent pollutant

Studies on the Degradation of Paracetamol in Sono-electrochemical Oxidation

A novel synergistic three-dimensional electrode system for emerging contaminants degradation: Significantly enhanced Mn(III) aq generation by organic pollutants and GAC

Nitrogen-doped iron-manganese porous carbon particle electrodes for electrocatalytic degradation of tetracycline: Interfacial reaction mechanisms

Efficient emerging contaminants (EM) decomposition via peroxymonosulfate (PMS) activation by Co<sub>3</sub>O<sub>4</sub>/carbonized polyaniline (CPANI) composite: Characterization of tetracycline (TC) degradation property and application for the remediation of EM-polluted water body

Freestanding 3-dimensional macro-porous SnO2 electrodes for efficient electrochemical degradation of antibiotics in wastewater

Efficient Degradation of Polyacrylamide Using a 3-Dimensional Ultra-Thin SnO2-Sb Coated Electrode

Efficient Degradation of Phenolic Wastewaters by a Novel Ti/PbO2-Cr-PEDOT Electrode with Enhanced Electrocatalytic Activity and Chemical Stability

Efficient degradation of propranolol with electrochemically activated peracetic acid process: Mechanisms, degradation pathway, and toxicity evaluation

Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

Three-dimensional functional carbon nanotube architecture as a highly efficient and active indirect catalyst for degradation of 4-chlorophenol