Abstract:Novel Ti/PbO2-Cr-PEDOT electrodes were prepared by electrodeposition for electrochemical degradation of phenolic wastewater. The electrodes were characterized by XRD, SEM-EDS, XPS, and FT-IR to study the crystalline, surface morphology, elements distribution, and microstructure of the electrodes. A flat and compact interface was obtained with Cr and PEDOT doping into beta-PbO2 plate by electrodeposition method. The linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) were conducted to explore the electrochemical performance of the prepared electrodes. The Ti/PbO2-Cr-PEDOT electrode exhibited a higher oxygen evolution potential (OEP, 2.53 V vs SCE) and a lower charge transfer resistance compared with Ti/PbO2. Phenol degradation efficiency of 100% and TOC removal rate of 95.02% were achieved in the electrochemical degradation of phenol within 120 min. The optimal process parameters (phenol concentration = 1000 mg.L-1, electrolyte concentration = 4.0 g.L-1, current density = 15 mA.cm(-2) and electrode distance = 3 cm) in the process of electrochemical oxidation of phenol wastewater were explored. Active species trapping experiments proved that center dot OH radicals played an important role in the electrochemical system. Furthermore, the electrode also showed high activity for the degradation of other phenolic wastewaters such as phloroglucinol (eta(DEP) = 100%), bisphenol A (eta(DEP) = 97.17%) and p-chlorophenol (eta(DEP) = 89.77%) within 60 min. A possible degradation pathway was proposed based on the intermediate products determined by HPCL. The Ti/PbO2-Cr-PEDOT electrode showed excellent stability with only 3% loss of degradation efficiency (eta(DEP )= 96.95%) after recycling tests for 5 times. These results suggest that Ti/PbO2-Cr-PEDOT is a promising electrode for electrochemical degradation of phenolic wastewaters.

Preparation of SnO2-Sb/attapulgite (AP) clay particulate electrode for efficient phenol electrochemical oxidation

Designing 3d‐mos2sponge As Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control

Preparation and characterization of PbO₂ electrode and its application in electro-catalytic degradation of o-aminophenol in aqueous solution assisted by CuO-Ce₂O₃/γ-Al₂O₃ catalyst.

Enhanced mass transfer and service time of mesh Ti/Sb-SnO2 electrode for electro-catalytic oxidation of phenol

Preparation and characterization of Ti/SnO(2)-Sb(2)O(3)-Nb(2)O(5)/PbO(2) thin film as electrode material for the degradation of phenol

Enhanced performance of an Al-doped SnO2 anode for the electrocatalytic oxidation of organic pollutants in water

Three-dimensional electrochemical degradation of p-aminophenol with efficient honeycomb block AC@Ti-Cu-Ni-Zn-Sb-Mn particle electrodes

Ti/SnO[sub 2]–sb Electrodes for Pollutant Degradation Prepared Using Ultrasonic Spray Pyrolysis

Sustainable and effective catalytic particles for electrocatalytic combustion of refractory organic matter

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Enhancing Internal Electric Field of 3D Porous Chitosan-Pdi Polymer with Donor-Acceptor Structure for Efficient Photocatalytic Advanced Oxidation

Efficient Degradation of Phenolic Wastewaters by a Novel Ti/PbO2-Cr-PEDOT Electrode with Enhanced Electrocatalytic Activity and Chemical Stability

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

Design and properties of Sn–Mn–Ce supported activated carbon composite as particle electrode for three-dimensionally electrochemical degradation of phenol

Electrochemical Oxidation of Pyrrole, Pyrazole and Tetrazole Using a TiO2 Nanotubes Based SnO2-Sb/3D Highly Ordered Macro-Porous PbO2 Electrode

Photosensitized Oxidation Of Substituted Phenols On Aluminum Phthalocyanine-Intercalated Organoclay

Investigation of a novel pyrolusite particle electrode effects in the chlorine-containing wastewater

Electrochemical oxidation of phenol in chloride containing electrolyte using a carbon-coated Ti4O7 anode

Electrocatalytic oxidation of phenol from wastewater using Ti/SnO2-Sb2O4 electrode: chemical reaction pathway study

Preparation of an ultra-long-life porous bilayer Ti/Sb-SnO2 electrode modified by nano-TiC for degradation of phenol