Abstract:Thermoelastic characteristic of amine functionalized graphene. This paper reports improvement in the tensile, flexural and interlaminar shear strength (ILSS) properties of ADG‐NH2/Epoxy/CFRP composites at low filler content. Five symmetrical CFRP composite laminates were prepared through wet layup process assisted by vacuum bagging technique with varying wt% proportions (0.25, 0.5, 0.75 and 1) of ADG‐NH2/Epoxy. Tensile tests, short beam shear test and flexural tests were carried out as per ASTM D3039, ASTM D2344 and ASTM 790‐10 respectively to assess the effect of the ADG‐NH2 functionalized nano additives on their mechanical properties. The variation in ILSS were studied for varying temperatures (room temperature, 35, 50, 75, 85, & 100°C for each type of ADG‐NH2/Epoxy wt% (neat, 0.25, 0.5, 0.75 & 1)) of ADG‐NH2/Epoxy/CFRP composites. The ILSS was enhanced up to ∼27% for 0.5 wt% of ADG‐NH2 reinforced CFRP at room temperature but reduced with the higher concentrations (0.75 wt% & 1 wt%). It was observed that ILSS reduced with gradual temperature variations up to 100°C w.r.t room temperature. But an increment was observed up to 0.5 wt% for ADG‐NH2 for all temperature. Form the test results, it has been recorded an improvement in mechanical properties that is, the elastic modulus by ∼18%, ultimate tensile strength by ∼21%, % elongation at break by∼19% and toughness by∼28% for the 0.5 wt% of ADG‐NH2 graphene nano additive reinforced CFRP composite laminates as compared to neat epoxy CFRP laminates. Results also show the augmentation in the Max load by ∼24%, flexural strength by ∼33%, flexural modulus by ∼43%, and flexural strain by ∼26% were observed for the 0.5 wt% of ADG‐NH2 graphene nano additive reinforced CFRP composite laminates as compared to neat epoxy CFRP composite laminates. Fractographic studies of fractured surface using SEM analyses shows better adhesion mechanisms which supports the augmentation in mechanical properties with addition of amine functionalized graphene to CFRP laminate. Highlights Reinforcement of amine functionalized (ADG‐NH2) graphene in the epoxy matrix and incorporation with carbon fibers to enhance the interfacial and flexural properties. Evaluation of temperature effects on interlaminar shear strength properties of amine functionalized CFRP composites Improvements in tensile, ILSS and flexural properties observed for a low percentage (0.5 wt%) of ADG‐NH2 graphene reinforced CFRP composite laminates. Use of aerospace grade epoxy and resin with amine functionalized graphene for further use in aerospace industry applications.

Synergistic effect of alkali treatment and graphene filler on the mechanical characteristics of nettle fiber reinforced polymer composite

Preparation of carbon fibre-reinforced composite panels from epoxy resin matrix of nano lignin polyol particles

Effect of graphene coating on modified and pristine carbon fibers on the tribological response of carbon fiber epoxy composites

Mechanical Characterization of Graphene-Hexagonal Boron Nitride-Based Kevlar-Carbon Hybrid Fabric Nanocomposites

Dispersion Characteristics, the Mechanical, Thermal Stability, and Durability Properties of Epoxy Nanocomposites Reinforced with Carbon Nanotubes, Graphene, or Graphene Oxide

Synergetic effect of incorporating graphene, CNT and hybrid nanoparticles on the mechanical properties of glass fiber reinforced epoxy laminated composites

Enhanced mechanical and interfacial performances of carbon fiber reinforced composites with low percentage of amine functionalized graphene

Mechanical, Thermal and Morphological Characterization of Graphene/Al2O3‐Reinforced Epoxy Hybrid Nanocomposites

A Preliminary Study of the Influence of Graphene Nanoplatelet Specific Surface Area on the Interlaminar Fracture Properties of Carbon Fiber/Epoxy Composites

Static and fatigue performance of graphene nanoplatelets coated bi‐directional carbon fiber‐epoxy composites under bending loads

Effects of introducing CNTs and GPLs on mechanical, modal, thermal, and water uptake properties of twill basalt fiber-reinforced epoxy matrix composites

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Is Graphene Always Effective in Reinforcing Composites? The Case of Highly Graphene-Modified Thermoplastic Nanofibers and Their Unfortunate Application in CFRP Laminates

Mechanical properties of a carbon fiber reinforced epoxy resin composite improved by integrating multi-walled carbon nanotubes and graphene nanoplatelets

Mechanical, machinability and water absorption properties of novel kenaf fiber, glass fiber and graphene composites reinforced with epoxy

Effect of graphene nanoplatelet filling on mechanical properties of natural fiber reinforced polymer composites

An unexpected hardening behaviour of carbon-fiber epoxy composites under flexural fatigue loading and its intensification by graphene nano-fillers

Improvement of mechanical performance via interfacial strengthening of carbon fiber‐epoxy reinforced hybrid laminate by incorporation of functionalized graphene nanoplatelet interphase

Effect of graphene nano-platelets on mechanical and impact characteristics of carbon/Kevlar reinforced epoxy hybrid nanocomposites

Influence of graphene nanoplatelets on mechanical properties and adhesive wear performance of epoxy-based composites

Preparation and Fracture Analysis of Advanced Layered Composite with Graphene-Coated Alumina Nanofibers