Dispersion Characteristics, the Mechanical, Thermal Stability, and Durability Properties of Epoxy Nanocomposites Reinforced with Carbon Nanotubes, Graphene, or Graphene Oxide

Miraidin Mirzapour,Patrice Cousin,Mathieu Robert,Brahim Benmokrane

DOI: https://doi.org/10.3390/polym16131836

IF: 5

2024-06-28

Polymers

Abstract:Carbon-based nanoparticles (CBNs) are regarded as promising nanofillers in nanocomposites to produce high-performance fiber-reinforced polymers (FRPs). To date, no systematic investigations have been carried out on the structural variations of nanofillers and their influences on dispersion characteristics, which give nanocomposites their mechanical and durability properties. Moreover, environmentally unfriendly organic solvents are used to exfoliate and disperse CBNs in a polymer matrix. This study developed a green, easy approach to preparing epoxy/CBN nanocomposites. We demonstrated graphene oxide's (GO) effective dispersion capacity, creating good interface interaction that dramatically influenced properties at loadings as low as 0.4 wt%. The tensile strength and toughness of the epoxy increased by about 49%; and 160%, respectively. Incorporating 0.4 wt% of multi-wall carbon nanotubes (MWCNTs), graphene nanoplates (GNPs), or GO into the epoxy increased the modulus storage by around 17%, 25%, and 31%, respectively. Fractography analysis of fracture surfaces indicated the primary reinforcing mechanisms (crack deflection and penning) as well as the secondary mechanism (bridging effect) enhancing the mechanical characteristics of nanocomposites. Incorporating GNPs, GO, or MWCNTs into the epoxy decreased the water absorption at saturation by about 26%, 22%, and 16%, respectively.

polymer science

What problem does this paper attempt to address?

This paper mainly discusses the issues of enhancing the dispersion, mechanical properties, thermal stability, and durability of epoxy nanocomposites by adding carbon nanotubes (CNTs), graphene nanosheets (GNPs), or graphene oxide (GO) in epoxy resin (EP). In the study, the authors used a green and simple method to prepare these nanocomposites, avoiding the use of environmentally unfriendly organic solvents. The nanofillers were dispersed in the curing agent through high shear mixing and ultrasonic treatment.

The experimental results showed that even at a low loading of 0.4 wt%, GO significantly improved the tensile strength and toughness of epoxy resin, increasing by approximately 49% and 160% respectively. The addition of 0.4 wt% of CNTs, GNPs, or GO also increased the storage modulus, by 17%, 25%, and 31% respectively. Moreover, these nanocomposites showed reduced water absorption, indicating improved durability.

The paper also mentioned that the aggregation of nanoparticles would affect the interfacial properties and composite performance. Fracture analysis revealed the primary and secondary toughening mechanisms, such as crack deflection, pinning effect, and bridging. Compared to traditional manufacturing methods, the green approach of this study achieved better dispersion of nanoparticles, thereby enhancing the overall performance of the materials.

In conclusion, this paper aims to address how to improve the comprehensive properties of epoxy nanocomposites, particularly in terms of mechanical properties and durability, in an environmentally friendly manner by optimizing the structure and dispersion state of nanofillers.