Abstract:The nanomorphology of bulk heterojunction (BHJ) blends based on poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7) blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is systematically varied by using the volume fraction of the solvent additive 1,8-diiodooctane (DIO) from 0 to 20 vol % in chlorobenzene to prepare organic solar cells (OSCs). Blends prepared without DIO forms large phase-separated domains of PC71BM which are suppressed on addition of 3 vol % DIO, resulting in improved nanoscale features. Addition of 20 vol % DIO results in a finer interconnected morphology along with increased roughness due to polymer aggregation, which contrasts with previous reports. With increase in addition of DIO the photoluminescence (PL) from the blend is reduced; however, a relative increase in PL from 750 nm onward is observed for blends with 20 vol % DIO. As quenching of the blend PL is related to the donor/acceptor interface, structural characterizations in real-space (microscopy) and k-space (scattering) are performed to unravel the nanomorphology and correlate it with photophysical and charge transport processes. Electron-transport length scales measured by scanning photocurrent microscopy are found to increase with the addition of up to 3 vol % DIO associated with the breakup of the large PC71BM agglomerates, while the hole-transport length is found to increase on adding DIO up to 20 vol % due to aggregation of polymer chains. Hence, this work represents a unique set of results systematically examining the effect of nanomorphology on structural and solar cells properties of BHJ blends, which can have a direct implication on better understanding of the emerging high-efficiency OSC systems.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02256?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02256</a>.Energy level diagram and device architecture; illuminated J–V, dark J–V, EQE, AFM, TEM, R-SoXS, GIWAXS, NEXAFS, and PL for different additive concentrations in blend; knee voltage from dark J–V; methodology for calculating domain size from AFM and TEM; scanning photocurrent microscopy setup; hole-only and electron-only J–V plots; schematic of simulated device structure for FDTD simulations; absorbance for PTB7 film and solution for different DIO concentrations (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02256/suppl_file/an0c02256_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Impact of Dilute DIO Additive on Local Microstructure of Fluorinated, pNDI‐Based Polymer Solar Cells

Synergetic Solvent Engineering of Film Nanomorphology to Enhance Planar Perylene Diimide-Based Organic Photovoltaics.

The effect of additive on the performance and phase separation of benzo[1,2-b:3,4-b′]dithiophene-based polymer heterojunction photovoltaic devices

Effect of 1‐Fluoro‐2‐iodobenzene Solvent Additive on the Crystallization of Donors and Acceptors, and Ultrafast Carrier Dynamics in Polymer Solar Cells

Correlation of Nanomorphology with Structural and Spectroscopic Studies in Organic Solar Cells

The charge dynamics of PBDB-TF:IT-4F based non-fullerene organic solar cells with 1,8-diiodooctane additive

Surface crystallinity enhancement in organic solar cells induced by spinodal demixing of acceptors and additives

In Situ X-ray Scattering Studies of the Influence of an Additive on the Formation of a Low-Bandgap Bulk Heterojunction

Unraveling the Effect of Solvent Additive and Fullerene Component on Morphological Control in Organic Solar Cells

Suppressed Charge Recombination in Polymer Solar Cells Based on Perylene Diimide Derivative Acceptors Via Solvent Vapor Annealing

The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives

Improving Cooperative Interactions Between Halogenated Aromatic Additives and Aromatic Side Chain Acceptors for Realizing 19.22% Efficiency Polymer Solar Cells

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

High performance organic solar cells enabled by an iodinated additive

Exploring the Impact of 1,8-Diioodoctane on the Photostability of Organic Photovoltaics

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Enhancement of vertical phase separation in sequentially deposited organic photovoltaics through the independent processing of additives

Improving the Molecular Packing Order and Vertical Phase Separation of the P3HT:O-IDTBR Blend by Extending the Crystallization Period of O-IDTBR

Synchronous Regulation of Donor and Acceptor Microstructure using Thiophene‐Derived Non‐Halogenated Solvent Additives for Efficient and Stable Organic Solar Cells

Macromol. Chem. Phys. 9/2013

Enhanced Charge Transfer, Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination